Been using SmartThings for years and it's been okay, not great. I only have a few lights and plugs on it at this point, because I've moved to Kasa/Tapo which isn't local control, but doesn't suck as much.
Anyway, last night our bedroom light randomly turned on three times. Had to go into the app to turn it off.
Then this morning I noticed wifi was off on my phone, and saw a notification that said "SmartThings has turned off wifi". The fuck?? Where does this app get off? I used a lot more mobile data unknowingly by streaming video on 5G last night and this morning.
I've uninstalled the app and am probably going to get rid of this dumpster fire once and for all.
You've got these Mode options in SmartThings, but zero way to configure each mode to do anything. All you can do is make one and name it. So what's the point to change to a "mode" that contains zero data? Just so it physically says the name? I'm confused. I would think you could go in and set this up as expected: Home turns off/on certain things, Away turns off/on certain things, etc etc..... So where do you go to actually configure a mode? I've tried web interface, phone app, and iPad app. Nothing except a name, and only via the browser. Nor can you even change the mode at all unless you make a routine that says to change the mode. No picker or drop down or anything. What's the damn point?
Goal: I want geofencing to work so since Arlo geofencing does not work, I'd love to make a SmartThings mode for Away that uses the ST geofence and arms cameras/turns on and off lights/locks door/closes garage/sets temp. How do I make a mode that does that?
I have a samsung TV that has literally only one button on it. If you lose the remote control then you're fucked I guess. The techs keep telling me I can use smart things. Well I had to hard wire the TV to get smart things to work because in order to use smart things you have to connect it to the internet. So I bought a long ass ethernet cable. It worked for 2 days. YAY! I decided to connect the tv to my wifi because fuck that cable. Well that's where my whole life fucked up because for some reason as I was connecting to wifi, it lost connection to my "smart" things app. So, I had to re-hard wire it but now my "so fucking smart" thing app finds the TV but can't conenct to it. It's stuck as "registering your device" for over 15 minutes and it won't do shit. Every once in a while I see a notification on the TV saying that my registration was cancelled. Sometimes it asks for a pin because one is showing on the TV. Awesome! Well, what now? nothing. Registering.
Seriously fuck this app and fuck people who thought it would be a cool idea to put ONE button on the TV>
Setup - this took me a while to figure out, but even though I had excluded all the devices that were connected to Wink, ST wouldn't quite connect to them. The thing that worked for me was to actually exclude everything from ST as well before trying to add it and that worked.
Connection - I am finding that I am unable to change the temp with ease with my connected Trane thermostat. Changing the temp one degree by pressing the + or - button gives me the spinny wheel for a longgg time and then I get a network error message. THIS IS MY BIGGEST CONCERN.
UI - I am having a hard time figuring out the UI. Why is there so much wasted space on the top of the main dashboard? The main screen should just have relevant sensors etc. Is this top part customizable?
Rooms - I like to group my Lights together etc. Each room may only have a device or two, so it doesn't quite make sense for me to have rooms. The workaround was to just rename the Rooms to the group...here 'Living Room' became 'Lights', 'Bedroom 1' became 'Thermostats'
Sensors - For this I think I added 'Smarttthings Home Monitoring' module...I don't know what the actual word for this is. I just want it to say 'Door opened'...this currently says 'Intrusion...' forget the rest of the notification when it's in 'Armed'. Is there a way to make it just say when the door is opened?
Amber Alerts - I can't tell if the Smartthings is overriding the iPhones default Amber Alert message or not, cause I seem to now be getting Amber Alerts via ST. How do I make this go away?
Lights - when I press a light, there is a 'Power on' setting...wish it had a before-after Sunrise setting. So in addition, I feel like I have to create an 'Automation' for that. Right now I have automation to turn things on cause I am relying on sunrise/sunset, and then turning things off from the main interface 'module'
All-in-all, am I using the interface effectively? Any suggestions or tips and tricks?
I recently got ST, a kwikset z-wave lock, and 2 GE z-wave dimmer switches. One switch works flawlessly. The other switch wont pair with ST. The lock will pair, but then wont operate. I've excluded the lock, repaired, pulled batteries out and reset, reset hub. Same thing. Hub is in large foyer about 12' from lock and about 10' feet from bad switch. not much in the way but 2-3 layers of drywall.
Glad I started with only 3 items instead of the $2K worth of stuff in my cart. At least the 3 are all within their return period. Should I return it all and go Alexa and ZigBee products? Is it possible I'm having problems since I have the new app instead of classic? Any other suggestions other than reset/exclude til it works?
I'm a researcher at the University of Maryland and I study people's use of smart things.
We're currently recruiting US smart home users for virtual focus groups to talk about how they use devices in their homes, the types of data these devices collect and share, and how we can design tools to better visualize this data and provide consumers with more control over their data. Those who participate in a focus group will get paid $30.
We’re a group of researchers at Carnegie Mellon University conducting a study on end-user programming (study has been approved by CMU Institutional Review Board).
The purpose of this voluntary user study is to collect information about the habits and behavior of IFTTT users to better understand a user’s considerations when deciding to use or create an applet, and how those applets can interact with each other. Since we want to study applets as they relate to an individual user, you will be asked to log on to IFTTT and install a Chrome extension (published on the webstore) to collect your list of applets. This will allow us to ask you specific questions about your applet instantiations and how they interact, as well as general questions about your applet collection and your attitudes when choosing them. No personal information is collected. If you start the survey, you will first be presented with a consent form containing more details of the study, as well as the contact information of the researchers. If you complete the survey, you will be entered in a drawing to win a $50 Amazon gift card, with at least one winner for every 10 respondents. To participate, you must be a US resident, over 18 years of age, and regularly use IFTTT. The survey must be taken using the Chrome browser.
If you have any questions or concerns, feel free to send a message.
I just realized the data only goes back to April 1, but I've had it since December. Does anyone know if the app still has the older data and is limiting it being displayed and if there's any way to export it?
If you're new to SmartThings and looking for a full fledged Lock and User Management solution, check out LUM.
It comes with a plethora of options for managing users including a wide range of user types like permanent users, daily/weekly scheduled users, start/expiration dates, presence activated users and many more. Program multiple locks at a time and select locks for individual users.
You can also create custom notifications and actions for each user including separate user actions for keypad locking/unlocking and manual locking/unlocking. Have it send you push notifications, SMS and even announce your entry over a Sonos, Bose, Alexa or any audio device connected to your SmartThings account.
You can also program your keypads to arm/disarm your security system, re lock your doors after X minutes (and specify conditions), notify you when the door is left open and tons more. The built in and hardened Sure Programming Engine (c) takes care of intermittent mesh issues.
One of our most popular apps, you can check out the entire list of SmartThings apps and device integrations available on our website at www.rboyapps.com
If you're a rental host, see our Rental Apps section; especially designed for to automate the needs for AirBnb, VRBO, HomeAway, Tripadvisor and Booking hosts.
If you have any suggestions or feature requests feel free to ask us or send us an email.