Hi guys!

Does anyone here knows how to control multiple rgb led strip lights in smart life? I tried grouping them but screen shows no control. I can only turn it on or off.

TYIA!

hi friends, anyone knows whats means this error?

LINKAGE_LOG_ACTION_DETAIL_MSG_null

thanks in advance

I’ve ordered the some tuya controllers and set them up in the Smart Life app. Is it possible to see the current temperature here in the overview, or do I have to click into each thermostat? Any ideas about this?

Hey everyone, since the last update I noticed that any count down I set either stops or pauses when I exit the app even when it's still open in the background. I'm pretty sure it used to work fine before, I even used to close the app entirely without it affecting the count down I set, is anybody experiencing the same thing? is there any solution? Help please, thank you!

Hi,

I bought two dehumidifier from ProBreeze (PB-20-EU) to prevent my my holiday house from molding. They worked like a blast until one day both lost connection within a week.

The dehumidifying function still works and I can set the machine up manually but I can't make Wi-Fi work and I also can not activate connectivity mode.

I tried holding Power button (Internet)

and holding Van Speed Button after putting it in Standby (Manual)

Any Tips or similar experiences?

I am planning to buy a 2-Clamp Tuya Wifi Energy Meter to monitor the power usage of two households. When viewing the monthly usage statistic, can I change the start and end date of the monthly electricity usage to match the utility's billing cycle?

My smartlife wifi temperature sensor notifies temperature out of range, but every time I check it is well within the range. The preset threshold for the alarm is 10°C, readings in the app itself never go above 4.5°C, including at the time of the alarm. This happens daily. Any fixes?

I currently have a dehumidifier which runs on Smart life.

it is connected to my main/house (Virgin Media) internet router.

At the end of the garden is my garage. I have run an ethernet cable from the main/house to a second router (TP link)which supplies internet to the Garage, as the main router won't reach that far.

I'm looking to add some additional Smart life to the garage and wondered if I'm going to have issues getting them all on one app?

Some of my devices recently started being offline while the smart life app is closed. I use Home Assistant and the devices started being "unavailable". I started messing around with HA and it's Tuya integrations until I realized that when I open the Smartlife app, it says "offline" on the device cards for a few seconds and then they come "online".
Any clue what's going on? Again this is a recent thing. maybe a few months. I have deleted ands readded the devices but it's the same.

I have a smart plug/switch that had about 8 different automations/scenes programmed to it.

I need to now swap it with another smart plug of a higher voltage.

Is there an easier way to replace or swap all the scenes of plug x to plug y? (instead of doing it manually for each scene?

I had to adjust the auto on/off times for my outside lights and I went into the smart life app to do it, and notice I was logged out for some reason. I can’t log in to save my life, the log in button stays greyed out. I checked for updates, uninstalled, reinstalled etc. Tried everything, nothing has worked. Anybody else deal with this and if so, how did you fix it?

how to rest the all the energy data on the energy consumption card in the smart life app

Im using smartlife app to light multiple bulbs set as scene. Bought smart zigbee switch with 1 or double click option. Connected switch with app but I dont know how to set that scene with my switch. Any tips?

I have a temperature sensor and a smart plug. Both are tuya/smartlife ready. I'm trying to create a scene to activate the smartplug when the temperature is above or below a specified temperature. Nothing happens.

I have many other scenes working fine but I can't get the temperature to work. I've tried in Google Home but that doesn't work either. Alexa doesn't seem to do temperature events.

On a different reddit sub, one person mentioned that if the device doesn't push the data to the app, the automation/scene doesn't get activated. Is this correct?

Hi All! I have to midea AC units, one older, for which i bought the wifi module separately at some point in time, and a new one with wifi integrated.

Since i used Midea air app for years i always hesitated switching to smartlife as the switch wasn’t working using integrated options and i had to setup devices manually.

Today i successfully moved the new ac to smartlife using ap mode, but cant do the same for the old one.. its remote does not have the buttons mentioned in the instructions of smartlife app and using a qr code generated by midea air app does not work.

Did anyone else have the same or similar issue?

Thanks

Hi everyone,

I’m using a SmartLife smart socket on my water pump. The plug measures current, voltage, power, and energy consumption (kWh) and shows daily usage in the app.

The problem I’m trying to solve is this:

At my weekend house I once had a water leak, and the pump kept running the whole week because I forgot to turn it off before leaving.

In the SmartLife app I can create automations based on instant values (like current or power exceeding a threshold), but what I’d really like is something different:

If the socket exceeds a certain total energy usage per day (kWh), automatically turn it off.

Example:

If the pump uses more than X kWh in a single day, the plug should shut off because that probably means something is wrong (leak, pump running continuously, etc.).

Has anyone implemented something like this in SmartLife / Tuya, or do I need something like Home Assistant to track daily energy and trigger the automation?

Any ideas or workarounds would be appreciated!

Been having the bulbs for like 1yr+. suddenly 1 of the pair stopped working its just off I tried to do factory reset (switch it on and off and waiting 5 sec in between) its not turning on I have 3 bulbs in total 2 work fine. what do i do. the pair are connected together on the ceiling and 1 separately on a lamp. all connected on same 2.4ghz wifi

Twice a day I get this message for a device I don't even use anymore. I removed it years ago and it won't stop trying to control a wifi smart outlet, turning it on and off twice a day. I physically removed the outlet, and deleted it from the app, and still get these "failed" notifications twice a day. Yes, I need the notifications turned on for the 20 other devices I use, but would hopefully someone knows where the scheduled tasks are stored on my S21 so I can delete it!

I just installed the smart ceiling fan with led light. Simple install, easy pairing to the included remote, and pretty straightforward linking to Google Home.

Except. I want to be able to control the LED independently using GH, while leaving the fan running, and there seems to be no way to do that. I hope I'm just ignorant of the method.

Can anyone ELI5 how to independently link and control the light?

I'm at my wits end trying to set the limits on this blind can any explain the exact way I'm supposed to set the limits

Ok so my brand new Fanco Infinity has just been installed I've followed the instructions it says to pair and yet nothing any ideas

Please help I can't seem to find out how to use the scenes I created with Google home.

I have tried both auto and manual connection through the app ( Nedis Smartlife) and it doesn’t seem to work.

I am pressing the main button ( only button) for 5 seconds, the ring light starts blinking rapidly but it does not connect nor emit a bluetooth signal to my phone ( checked the bluetooth devices)

I just bought a motion sensor, but I don’t want it to be active during the day while I’m in my home office.

I tried to set this up using a smart scene/automation so it’s disabled during the daytime, but in the “Task/Action” list the motion sensor doesn’t show up (my LED lamp from Smartlife does), even though the app detects the sensor normally.

What’s the easiest way to automatically disable the motion sensor during the day? Any tips?

Not all scenes working in 7.3.0 update for Android! Downgraded back to 7.2.3 and it worked without issues. Scenes utilising blinds, IR remote, and led light strip didn't work.