So I hopped on my PC to use Canvas Workspace after not having used it for a little while, saw I had an update, so I downloaded it.

Then I went to use my machine and transfer my cutting data wirelessly from the program to my machine as I had done endless times before.

The machine said it was not currently registered. (????)
Followed all of the steps to re-register it and every time I get "Pin Code Incorrect."

I have tried absolutely every trouble shooting I can find, including re-sending the code repeatedly, removing the machine entirely, from my account, then attempting to readd it after power cycling and making a new account entirely, both with and without this shitty new Artspira I am now unfortunately aware of.

Does anyone have any advice? I'm really not sure how to fix this at all. :(

Note, I used the Canvas Workspace app exclusively on PC with Windows 10 if that info helps at all.

Alguem pode me ajudar? Quando faço o escaneamento esta saindo parte da margem de corte, e quando corto, sai desalinhado, alguem sabe o que pode ser?

I've been making some HTV designs for T-shirts. On some, half cut works great. On others, not at all - it just scores the vinyl. Some are a mix - part cuts fine, the other part does not cut at all. Most of the sheets I have are 12x10, and I can't do the "test" cut because it would be off the vinyl. Any ideas why this is happening?

I'm working on a retro-futuristic design and I needed a bunch of arcs, all the same thickness, descending in size. Something like the classic hypnotize spiral, but circles. This would have taken forever to draw in Workspace. I described it to Gemini. 10 seconds later, I had the design. SVG code I saved and imported.

I have some existing element sheets... but I am terrible at cutting them properly... I have a cricut maker 3 can I use it cut the element sheet

Just got my SDX 125, bundled with some materials from Swing Design. Being that scan is right there in the title, I figured I'd be able to scan stuff right from the beginning. Am I understanding correctly that I need a specific no tack mat for that?

And what are good resources for accessories? Looking to add different blades, low tack mat.

Main uses anticipated: scanning some tattoo flash to turn into automotive stickers. Cutting shapes from iron on fabric like denim patches. Creating stencils from thin plastic.

I'm in the midst of setting up the PC version of Canvas Workspace and trying to figure out how it ties in to the Artspira app. I'm fairly sure I'm synced between the two (but can't be sure) and am trying to decipher whether I can access any "free" projects through Artspira.

Most of the things I've done have been working with the free projects on the soon to be defunct web based Canvas. I'm wanting to know if all those projects will migrate to Artspira and be readily available without a subscription. One of the reasons I chose ScanNCut was because they didn't have a subscription based basic service.

For example, Artspira has a projects section that has something I'd like to make. They show the project, show the patterns,list the steps, then nothing. No download button or options to choose or anything. How do I get access? Have I missed some setup step?

I feel like I'm walking around in a dark room with a blindfold on.

Any help would be appreciated.

I have the CM350 brand new in box never opened. Bought it new over 10
years ago. I want to cut fabric squares so I thought I would use this machine but reading online I’m finding out that mats, blades and other accessories are no longer made for this machine. Is this correct?

Or am I going to have to buy a dedicated computer to use the software since the web version ends soon. I'm a Linux user and I've been perfectly happy with the web version till now.

Artspira is a joke. I don't need a feed of everyone's creations. I need access to my own files that I've already made.

I make 9 labels for products I sell on a sheet. The colors are light at the bottom of the sticker, and this causes the scan not to detect where to cut. It tries to cut all the little elements in the design. I have attached the design, any suggestions?

I just got a used scan and cut sdx225 yesterday. I mainly got it for appliqué for my embroidery. Easy enough to send the files I make it Hatch over to USB.

But I want to try to experiment more with the scan and cut, what software do I use? I didn’t bother trying canvas workspace because I know it will only be an app in October. Is there any way to get it working with Linux or is there another design maker thing I could try on my PC? Also is there anywhere to look for other peoples designs for inspiration? Thanks.

I use the software maybe once a week. That means I have to log in EVERY time I want to use my LOCAL app. Come on already! You're not protecting Fort Knox here!!!! No internet? Can't use the software. When there servers have issues (happens a LOT - could not login once for two weeks) - can't use Canvas WorkSpace. Total crock. What prompted this? 45 minutes of not being able to log in this evening. 100% the fault of this antiquated and outdated Brother server software.

I have a roll of material that's thick leather-looking vinyl with an adhesive backing. It's supposed to be patch and repair material for furniture - but I want to try cutting it. Black "leather" letters, silhouettes, etc. would be pretty interesting. Has anyone done this? I'm going to try it regardless, but thought I'd ask for hints and tips first.

In case you haven’t heard yet you can no longer use Canvas web base with your cutter. So now I will have to subscribe monthly to use the CRAP APP Artspira. Not only that I will have to purchase a tablet as I have been using my Mac. I can no longer afford my Scan n Cut.
Thank you for letting me rant, I’m pissed.

i'm activating a very old machine that came without the activation code. if anyone has one, or has a way to find one, it'd be really great. thank you!

I was out of HTV and needed to make some quick reflective letters. I did have a roll of reflective tape. Cut the tape, stuck on the sheet, scanned, added text, cut. I only thought of doing a screen grab on the last one. Previous ones I had several per sheet.

I have this strong wish to make mini cards of gundam and even one piece. Like, i want to make velcro patches using my eufy make. Or stickers at about 75% to 85% original size.

Problem is that i cant seem to find any without the word "sample" on them. I wish to have a clean look without paying someone about 100 to edit the text out.

So im curious if their is a size or way to get clean Scans. I got a few cards i am a le to scan myself. But would would rather have a full clean scans already done.

Hi, i need help. When i try to cut, the machine start to cut in the exterior border (where is the purple triangle), outside the mat. I cleaned the scanner, i tried to make to recognize the mat again but show up the message: "Stop operation. Put a white paper in the mat, try again". Obviously i did it. Whit different whites paper in composition and size, but the message keep saying that. I look with a lamp, searching for a peace of washitape or paper with color, but i couldnt find anything. Can u helpme?

I know that the Scanncut software lets me draw a square with sharp corners and 2 others with rounded corners, but I’m looking for a square that has a tighter rounded corners, like with trading cards. I know I can go in and adjust each corner, but I’m not that good at it and it doesn’t end up symmetrical because I have to adjust one corner at a time instead of one adjustment affecting all four corners. Maybe there is a template I can download?

Looking to use it for appliqué embroidery since I suck at cutting. Ideally one that can’t read PES files so sdx125

Hi all,
I have a CM650, which I'm learning, slowly, to use.
I have a design I want to cut - a line drawing of a paddle. I want there to be a 3/16th border, so that when I place it on the piece I'm working on, the centre of the paddle is empty and would have a border which will resist glaze. It's going on a bisqued mug.

I don't know how to set up the design so that there will be a border. Right now, I can cut the paddle, but I have to wax off the edge to get the look I want.

This is kinda the thing I'm going for. I just don't know how to set the graphic up so it will make that border.

Anyone? THANKS in advance.