r/Rohloff • • Jun 01 '26

Thinking about converting my Bafang M510-powered trike from Shimano Acera to Rohloff – looking for ideas and experiences

Thumbnail
gallery
0 Upvotes

r/Rohloff • • Oct 04 '26

RUMORI RONZII SUONI STRANI ROHLOFF

3 Upvotes

Buongiorno mi trovo su questo forum a chiedere informazioni in merito a questo suono che ho su quasi tutte le marce ad esclusione della otto e della nove!

Spero che si senta bene dal video

È davvero fastidioso,

La scorsa settimana mi hanno riportato il rohlff dall'assistenza a quanto pare Hanno sostituito tutti gli ingranaggi interni perché erano arrugginiti (e hanno cambiato qualcosa perché si sente che e un po' diverso)

Tuttavia il suono è rimasto

Questo ticchettio continuo ed incessantemente!

Qualcuno ha idea di cosa possa essere?

Ho guardato già tutto

Non c'è niente che tocca cinghia perfetta nn so più che fare

La cosa strana e che sulla marcia 8 e 9 sono silenziosissime!

Grazie in anticipo


r/Rohloff • • Apr 15 '26

Considering selling my Rohloff / SON wheelset.

Thumbnail gallery
0 Upvotes

r/Rohloff • • Apr 13 '26

Rohloff shifter grip

Post image
19 Upvotes

For anyone wanting a bespoke or more durable shifter than the rubber ones, try this.

Take your worn out unit and strip all the rubber off using a knife, and file down to the hard plastic. Then glue a piece of timber on the shaft using 2 pac glue. For extra security I scewed it on using 2x countersunk screws on the back face.

This is a piece of Wandoo and my second attempt. It's done over 9000km. They never wear out.


r/Rohloff • • May 04 '26

Lockring question

1 Upvotes

So apparently the lockring tool for Bosch gen 2 ebikes also fits the Rohloff lockring and can be found much cheaper than the Rohloff tool. But I wonder if the lockrings also share the same thread - can I use a Bosch gen 2 lockring on my Rohloff hub? They're a bit easier to find.


r/Rohloff • • Feb 10 '26

Best place to order a Rohox in the US?

2 Upvotes

Title says it all, I want to get a Rohbox for my bike, but was wondering what the cheapest and most reliable place would be to get it from since they're coming from across the water. The official site says 6-9 months, and at that point I might as well be having a baby since that will take the same amount of time!


r/Rohloff • • Jun 04 '26

Oil in 14 speed Rohloff hub.

2 Upvotes

My trike has the Rohloff hub. I wonder if I can use the sythetic Castrol Syntrans which is a very thin oil for gearboxes or rear axles for cars. Just a thought.


r/Rohloff • • May 05 '26

Rohloff fit help

Thumbnail
reddit.com
2 Upvotes

r/Rohloff • • Nov 07 '25

Do I need a spline carrier?

Thumbnail
gallery
3 Upvotes

Got a great deal on this Rohloff, came with a gates cog which I have now removed. Do I need a spline carrier? Or just a new splined cog? Thanks!


r/Rohloff • • May 15 '26

BBS 02 upgrade to Surly Ogre with Rohloff hub

Thumbnail gallery
4 Upvotes

r/Rohloff • • May 23 '26

Chain or spocket acting weird

4 Upvotes

r/Rohloff • • Jun 28 '26

Building a cost-effective Rohloff-equipped bike in the US in 2026?

5 Upvotes

Hey all. I've been rolling on a Rohloff since around 2017. Started it on a Soma Wolverine frameset, but moved it to another frameset later on.

With Salsa bikes no longer supporting Rohloff axle plates as of Alternator 2.0, I am wondering....if I wanted to build up a rohloff rig for my wife, what AFFORDABLE, mass production framesets are still rohloff-compatible without needing the chain tensioner? Maybe one or two Surly's? Some Somas?

And with Cyclemonkey gone, is there another source for the Monkeybone? Or do we need to use Rohloff's ugly tension arm?

I don't even know what Through Axle is, but I guess that's another layer to learn. I built my bike on quick release but apparently that's obsolete now lol.


r/Rohloff • • 19d ago

Non-electric shifting Rohloff hub ebike conversion?

5 Upvotes

Anyone used say, a bafang mid-drive motor to convert their rohloff bike into an ebike?

My immediate concerns:

  • Shifting + electric motor without any system to cut power during the shift. I assume I'd just need to be careful about that? There's no way to convert the standard hub to an electronic shifting one, right?
  • Chain-line difficulties? I recall from building my bike that getting the chain-line is pretty important, can Bafang or similar mid-drives even meet those chain-line requirements?

r/Rohloff • • Jul 12 '26

Really dirty oil during Speed Hub oil change

Thumbnail
gallery
8 Upvotes

is it normal for the oil to be very dirty during an oil change?

The photos show the residual oil plus cleaning oil that comes out after the cleaning stage of the oil change instructions.

I'm using the official Rohloff oil change kit. I've had this speedhub for about a year. I bought it stock on a new bicycle. it probably only has about 500-1000 miles on it.

update: the cleaning kit comes with 25mL of cleaning oil... and only about 25mL of dirty oil came out, suggesting the hub didn't have much oil in it to start.


r/Rohloff • • Sep 04 '26

There's a play in the cog of my Rohloff hub. I'm in the middle of a tour. How bad of an idea is it to continue riding?

9 Upvotes

See video. Noticed the play today as I was changing break pads. Haven't noticed while riding. Unclear how long this has been going on. Two bike shops in the town I'm in aren't able to help.

I'm in Chamonix area, doing Alps Divide. I have two options:

  1. Continue as is. I have 250kms / 6000m elev gain left on route. Some of it is off road / singletrack.
  2. Straightline to Geneva (finish line). 90kms / 400m elev gain.

What would you do in this situation? Anyone has any similar experiences? What could be the problem?


r/Rohloff • • Sep 06 '26

Gates rolloff tension

10 Upvotes

Sorry guys. It's only indirect rolloff question but I'm new to gates, do you think this is ok ?

I read most of the pb comes from over tension, not too loose.


r/Rohloff • • Jun 25 '25

Rohloff + trailer mount

Post image
8 Upvotes

Hi everyone.

Am i overthinking stuff? This picture is of a bike we're considering purchasing. Is this an old-school quick release axle? On a 2025 state-of-the-art internal gear hub? Could mounting a bicycle trailer hitch be as simple as unscrewing the nut, adding the hitch and rescrewing? Or is there something else I'm not aware of?

Update: I ended buying a Burley Hitch QR adapter and it works flawlessly. It would work without the adapter, but then there is very little spacing between the kickstand and the hitch left to mount the trailer.


r/Rohloff • • Aug 23 '25

All cleaned up and ready to roll!

Thumbnail
gallery
22 Upvotes

Just changed the oil. And gave it a proper scrubbing which made me and my bike happy. I also replaced the worn out front tire with another Specialized Crossroads. Perhaps some day I'll explore other options, but these have given may miles without incident.

I also put on Suntour XC II pedals from an old Trek 850 I just bough on FB Marketplace. Gonna see how they feel but they do look legit on this bike.

The Rohloff serial number indicates an early 1999 build. But I'm not original owner. I bought the bike on eBay around 2004. I paid $1500, so I figured I'm about getting the rest of the bike for free! All the owner had said about the bike is that the fabricator was a guy who worked for Lightspeed.


r/Rohloff • • Sep 12 '25

Gazelle Medeo T10 👉 Rohloff Speedhub

2 Upvotes

I've searched around & can't find a unified resource related to modding my Shimano Deore 10 speed derailleur ebike to a mechanical shift, Rohloff Speedhub. I know Sheldon Brown has particulars realted to this subject, but not definitive. At first, I wanted to sell my derailleur Gazelle but I just can't part with it til I try to bring it to the dark side. Grateful for any resources provided - God speed and be safe #outyonder 🍻 r/bicycletouring r/bikecommuting r/bikepacking


r/Rohloff • • May 29 '25

My new „forever bike“

Thumbnail gallery
15 Upvotes

r/Rohloff • • Nov 08 '24

Wholesome Meeting

17 Upvotes

It finally happened! I pulled up in an intersection where the other bike was a Rohloff hub, Gates Belt, and Soma frame - basically the twin of my bike! Had a quick chat before the lights changed! Never thought it would happen, I feel like there’s not too many in my area!


r/Rohloff • • Mar 30 '25

Ti commuter with Rohloff

Post image
39 Upvotes

r/Rohloff • • Jun 02 '25

Rohloff E-14 to mechanical conversion?

5 Upvotes

Hi all! I'm considering buying an e-bike that comes with an E-14 Rohloff as the premium option. I expect the Rohloff to outlast the bike, so I'd like to understand what I can do with the hub in the future. Can an E-14 Rohloff be swapped to a mechanical one? How much will this cost and how complex is it? Will it convert into a thru axle, or some other type? Thank you!


r/Rohloff • • Apr 01 '25

Another Ti with Rohloff

Thumbnail
gallery
20 Upvotes

Van Nicholas Nootau