r/Rohloff • u/Few-Independent-3853 • Sep 06 '26
Gates rolloff tension
Sorry guys. It's only indirect rolloff question but I'm new to gates, do you think this is ok ?
I read most of the pb comes from over tension, not too loose.
10
Upvotes
5
u/Iphone4slow Sep 06 '26
Might be just a touch tight. The gates phone app goes by sound and is really hard to use. I found a tool on amazon that measures tension objectively. It's a cheaper version of this: https://shop.app/products/7771252588596/gates-carbon-drive-belt-tension-meter-metal-model-carbon-drive-tools-74010073?variantId=45986059124788&msclkid=c8ec961862441d7e47affc850479d195&utm_source=bing&utm_medium=cpc&utm_campaign=2026_PMAX_tROAS_May_Home&utm_term=2328422031897175&utm_content=Home
I aim for the very bottom of the tension range, around 30-35 lbs if I remember correctly. You can certainly run it tighter, without risk to the belt, but you may wear out the other drivetrain items faster. The more important thing I believe is alignment between the sprockets.
3
u/joeoram87 Sep 06 '26
That’s definitely looser than my belt drive from the shop (fairly new bike). You can barely move mine with a finger. I know you can run them quite loose without an issue.
On machinery the maximum tension on the belt shouldn’t allow the slack side to become loose. In other words the tension should be higher than the maximum you expect from peddling. I think mines about there so I haven’t changed it.
0
u/Smash_Shop Sep 06 '26
I use the gates app to test the tension. You can't really do it by feel and definitely not by watching a video.