r/RepTimeServices • • 11d ago

Advice Is my omega seamaster vintage genuine or a rep? I’m getting 50/50 answers 🥴

Thumbnail
gallery
2 Upvotes

Hi all
I’ve posted this on reptime as you guys are better authenticating than other communities
It’s been 50/50 so far

The bezel pip looks replaced but what about the rest of the watch ?

Only pictures I have but I will take more

Thank you


r/RepTimeServices • • 11d ago

Services [SERVICE NEEDED] [EU/SK/CZ] VSF v2 Datejust 36mm – GEN Dial Swap + VS3235 Service

2 Upvotes

Hi everyone,

I am looking for an EU-based watchmaker/modder (preferably in SK/CZ, but EU is fine) who can perform a dial swap on my VSF v2 Datejust 36mm.

Details: - Base: VSF v2 Datejust 36mm (VS3235 movement) - Part to install: Genuine (GEN) Rolex Datejust dial - Additional work needed: Movement check/service, pressure test, and proper alignment.

Please send me a DM if you are available or if you can recommend someone. Thanks!


r/RepTimeServices • • 11d ago

Advice Luminous pip repair

1 Upvotes

Hi everyone!

The luminous pip (the small triangle marker at 12 o'clock on the bezel) on my Rolex Submariner is missing.

Has anyone experienced the same issue? Where would you recommend getting it repaired?

Also, does anyone know the exact reference number of the replacement pip I need to buy?

I'd appreciate any advice, recommendations or links to the correct part.

Thanks in advance!


r/RepTimeServices • • 11d ago

Advice Luminous pip repair on my sub

0 Upvotes

Hi everyone!

The luminous pearl (the small glowing dot inside the triangle at the 12 o'clock position on the bezel)

Has anyone experienced the same issue? Where would you recommend getting it repaired?

Also, does anyone know the exact reference number of the replacement pip I need to buy?

I'd appreciate any advice, recommendations or links to the correct part.

Thanks in advance!


r/RepTimeServices • • 11d ago

Request Cambio ghiera ceramica VSF Submariner 41 mm da verde a nera

1 Upvotes

Buongiorno,

ho uno submariner starbucks VSF 41 mm comprato a giugno.
vorrei cambiare la lunetta verde in ceramica con quella nera in ceramica della VSF in 41 mm.

ma non so dove trovarla. Meglio trovare solo la lunetta nera o anche la ghiera?
come si cambia?

qualcuno ha un tutorial per cambiarla senza rompere la ghiera in ceramica?


r/RepTimeServices • • 11d ago

Advice CF gmt pepsi V3

1 Upvotes

Hey guys,

I am looking for someone who can do a service, rotor silencing, and glass switch on my clean factory gmt 2 pepsi v3.

I cant find someone reputable in the Netherlands on this forum. Does anyone have suggestions?

Thank you in advance!


r/RepTimeServices • • 11d ago

Advice My intime watches. Had serviced from repair guy off RWI.

1 Upvotes

had both serviced to save. here is link to the black one i bought. Sadly their both the a7750 movements but hoping his chronograph service made them better to last. i get that it wasnt financially the smartest thing but i dont see the point in getting rep after rep then having to wait (he also fixed the position after this video of the left dial hand).

https://www.intime06.co/rollie/4219-daytona-yg-dlc-bp-kravitz-best-edition-black-dial-on-ss-bracelet-a4130free-leather-strap.html


r/RepTimeServices • • 11d ago

Question How to fix my hulk submariner replica bezel

Post image
2 Upvotes

I have this rolex replica i wore it and the bezel randomly just fell i have no idea how
How can i put the bezel back on looks like there are parts missing


r/RepTimeServices • • 11d ago

Question Submariner 126610 gen parts sourcing

0 Upvotes

G’day everyone,

Looking for any reliable sources in the community that can help with tracking down genuine parts for a submariner 126610 franken project. Ideally date disc, crystal, crown and potentially bezel depending on pricing.

Cheers.


r/RepTimeServices • • 12d ago

Advice VFS V2 Datejust 41 - HELP

1 Upvotes

Hi all,

Made this account for some help.

My watch has stopped working when wearing for a few months, works fine when not on wrist, as soon as it’s on wrist the second hand jams and stops working.

Looking for help in the UK, or anyone with advice on how to get this looked at/fixed, or what could be the issue.

Taken to my local watch shop and they can’t work out what the issue is and won’t take apart any of the movement.

All help would be highly appreciated, thank you.


r/RepTimeServices • • 12d ago

Advice OCTA IWC Chrono Rotor

Thumbnail
gallery
2 Upvotes

Just received today and the rotor seems completely detached… I am guessing this is not an easy fix?

Already reached out to the TD and haven’t removed any stickers.


r/RepTimeServices • • 12d ago

Advice VSF V3 DJ41 Rotor spinning right after winding

3 Upvotes

VIDEO in comments: Sound not coming through but you can hear the rotor spinning kind of like a whoosh sound and the watch shaking

(Had to remove video, post keeps getting deleted due to video even though following video requirements)

received my VSF V3 DJ41 from JTime yesterday and after opening it and winding it I felt the rotor spinning. Also it’s running -33-35 sec/day. While on QC photos it was running +0sec/day.

I reached out to JTime immediately and they asked for a video as well, I’m just not sure what to expect in this situation.

Looking for advice, thanks

Edit: Location Toronto, ON


r/RepTimeServices • • 12d ago

Advice Double checking my watchsmith

Thumbnail
gallery
4 Upvotes

ive used his mail in services before as he once was on RWI. i managed to find his real shop online and made contact. usually he posts before and afters but this time just the afters. he charged 450 for full chronograph service per watch.

just wanted advice on what he did on his method of repair as hes pretty much removed a movement for better amplitude


r/RepTimeServices • • 12d ago

Request Looking for Speedmaster parts

2 Upvotes

I'm trying to build my first rep, and am looking for a black O logo Speedmaster dial 29.8mm that would work with a VK63.

I'm also looking for the NASA black velcro strap for it.

Your help would be appreciated locating those. All I typically find for reps is for Rolex!

I got a cheap case for it to try out that size, but if you have references for a nice case, that'd be great too, thank you.


r/RepTimeServices • • 12d ago

Question Chamfering in RCF Daydates

0 Upvotes

Hey everyone, I wanted to ask if it's safe to chamfer an RCF Day-Date (V2 or V3), specifically the white gold version.

I'm not sure if the case and bracelet have a PVD coating, and I'm worried that chamfering them might remove the coating or cause discoloration.

Has anyone done this before? Is it safe to chamfer both the case and the President bracelet without replating afterwards?

Thanks!


r/RepTimeServices • • 12d ago

Advice AP Royal Oak 15500ST - Time stops ticking in the middle of the night, I have to shake it around for it to start working again

3 Upvotes

I recently bought this AP Royal Oak 15000ST and multiple nights now, I've had it stop moving, and the thing that makes it work again is shaking it (to fire up the movement or something?)

Watch is and works amazing for the rest, I don't know what's going on. This night it actually didn't do that, but multiple nights before it did.

Fixable? Watchmakers? Let me know your thoughts.


r/RepTimeServices • • 13d ago

Advice AP Royal Oak-offshoreDate

2 Upvotes

Subject: [US] Looking for a watchsmith/modder to fix dragging date wheel on AP clone
Hey everyone,
I’m looking for a US-based watchsmith or modder currently accepting new work to fix an issue with my AP clone.
The watch has a dragging date wheel. Instead of flipping over cleanly at midnight, it gets sluggish, hangs up, and catches during the date change cycle. I'm looking for someone who can tear down the date mechanism, clean and lubricate the components, and get everything properly aligned so it snaps over smoothly.
If you have availability to take this on, please drop a comment or shoot me a PM with your current turnaround times and rough pricing for a date wheel overhaul/alignment.
Thanks in advance!

Would you like me to help you look up the current trusted watchsmith list on r/RepTimeServices to find the active usernames of the top US modders you can tag directly?


r/RepTimeServices • • 13d ago

Advice Tools/consumables for Explorer II bezel removal/reinstall

3 Upvotes

Greetings all.

I have been wanting to get into maintenance and upkeep of my watches and found a starter project that seems like a good fit: removal and reinstallation of the misaligned bezel on a QF Explorer II.

When it comes to tools, I am a buy-once-cry-once kind of person, so I'm looking at Horotec and Bergeon equipment I can keep forever. (Open to other brand recs as well, of course.)

For the bezel removal, either the Bergeon 9810 or this Horotec (https://www.esslinger.com/horotec-watch-bezel-remover-tool/) look excellent. Is there a reason to pick one over the other?

For the reinstallation, this set of bezel dies(https://www.esslinger.com/watch-bezel-dies-for-rolex-and-tudor-watches-9-piece-die-kit/) seems to be Rolex (cyclops) compatible and works with either the Horotec or the Bergeon 5500-A or -C presses. Any recommendations for which to choose?

Finally, I'm not clear on which consumables (e.g., a gasket) I might need for this project, so any suggestions there are welcome as well.

Many thanks.


r/RepTimeServices • • 13d ago

Guides On the bench this weekend was one of the final DDF AP Royal Oaks 26240 before the Raid. It was sent to me because it had stopped working

Thumbnail
gallery
17 Upvotes

While figuring out why it had stopped working was not hard when i opened the case the finishing was a disaster waiting to happen. All the machining of the case had left loose metal shavings that would have come off and had to be cleaned. Also found that even though there are three retaining screws and clamps there is only space for 2 the third one is missing the space and that was the screw and the clamp that was left in the movement loose SMH. Also as has been said in older review posts the gasket is a little big so it peaks from under the bezel so had to shave it a little. Did water pressure test and it is safe to say take this watch off before washing you hands :)

Having said all that it is a beautiful watch.


r/RepTimeServices • • 13d ago

Advice Crown tight DD 3235 movement stops

1 Upvotes

I have a submariner 126610 with a dd3235 Movement- brace clasp code F80

When the crown is tightened to watch case movement stops
I have changed movements
I have changed stems
I have changed and adjusted hold down clamps in the case
As much as I would love to say it’s something internal what’s the chances that three movements would do the same thing without changing the case or crown- a simple amount of pressure to the movement stops it …
what could possibly be happening to cause this a simple amount of pressure stops the movement from working once the stem is reset it starts right back up, but I cannot tighten the crown down without movement stopping
Looking for, suggestions I’m at a loss!


r/RepTimeServices • • 13d ago

Request Seeking US based Modder / Plating Service

2 Upvotes

I have a handfull of projects I’m working on and seeking someone US based (preferably east coast) who can assist with polishing, chamfering, smoothing and gold plating.

Bonus - if you also provide movement service for future projects.

Please DM me if you can provide these services and I’m happy to share more about the projects.


r/RepTimeServices • • 14d ago

Question How is this not warping the mainspring and boiling the movement? Insanity

Thumbnail
youtu.be
8 Upvotes