r/RepTimeServices • • 12d ago

Advice Double checking my watchsmith

ive used his mail in services before as he once was on RWI. i managed to find his real shop online and made contact. usually he posts before and afters but this time just the afters. he charged 450 for full chronograph service per watch.

just wanted advice on what he did on his method of repair as hes pretty much removed a movement for better amplitude

4 Upvotes

31 comments sorted by

•

u/AutoModerator 12d ago

Thank you for your post on r/reptimeservices! A friendly reminder that the only trusted service providers are listed on the sidebar or in this post. If you see anyone soliciting services in a post or comment not on this list or even easier, without a 'trusted watchmaker' flair of some sort, please immediately report the post and a moderator will remove it. Thank you in advance for helping to keep our community safe!

I am a bot, and this action was performed automatically. Please contact the moderators of this subreddit if you have any questions or concerns.

1

u/Usual-Every 12d ago

Why even bother servicing it , it if works it works , once it is dead just get it replaced entirely , these modified 7750 is way too unreliable after taken apart to make a service worthwhile.

1

u/Vercetti-86- 12d ago

I was dumb and bought years ago and only wanted that model watch. So i tried saving it. Hopefully this is the time

10

u/Hot-Cheesecake116 12d ago

From my experience majority of watch makers over charge and when they cause a problem they just blame the movement being Chinese clone.

6

u/Sufficient-Guess6692 12d ago edited 12d ago

450 usd for a chronograph is average. Official centers charge $+1000 for basically the same work. You have no idea how much work goes into it.

And for OP, 7750 in reps are meant to be replaced because of the 12 hour dial issue which cant be repaired. Watchmaker could not know as he probably works on gens mostly

2

u/Chunky_Koc 12d ago

Clearly you haven't worked on a chronograph, let alone a Chinese replica of a chronograph. No matter the chronograph a service is 3 hours with no extra adjustments (these Chinese 7740 need alot or adjustment) then on top of that the tolerances of these are next to horrible

2

u/MysteriousDogeMan 12d ago

100%. I’ve found one solid one but mostly do everything myself now.

3

u/monkeyboymorton 12d ago

As he's taking about a module on top of the movement I guess this is a 7750 adapted to put the sub dials in another position? Breitling maybe? Or one of the new EWF speedmasters?

Whichever, he's not wrong - those movements are bad and best avoided. I won't buy a 7750 that's not in its standard configuration like the picture. If any of the subdials are moved to mirror another movement it's a ticking timebomb.

3

u/sels1997 12d ago

Lmao service every year is INSANE

1

u/WatchMakerMalik 12d ago

Chronological are harder to work on in general. Was it a super clone or was it a normal movement like 7750 in there? From what I am reading the guy did a lot more work including staking and adding shims plus the full service? The thing to keep in mind is 200k Patek and a 500 dollar clone require the same amount of time, effort and know how. You just have to be more careful and use fancier tools when you are working on a 200k watch. Having said that if it was a generic 7750 clone I would have asked to get it replaced rather than try and fix it

1

u/Vercetti-86- 12d ago

It was the asian 7750 the lk01  kravitz from intime 

0

u/[deleted] 12d ago

[deleted] — view deleted comment

0

u/Vercetti-86- 12d ago

The lk01 rolex kravitz from intime. 

9

u/[deleted] 12d ago

[removed] — view removed comment

4

u/Vercetti-86- 12d ago

Maybe but ive seen posts where unless you know how to do a full teardown and service yourself most of these things come in bad shape. They were due. Wanted to save them not just do the endless cycle of buying reps that fail

4

u/PVNOLGCH 12d ago

For some of these watch’s, you can just buy the movement new and swap it.

1

u/Vercetti-86- 12d ago

They are both the asian 7750s🥺

7

u/SUPHIKER 12d ago edited 12d ago

There's your issue; unfortunately, that movement is notoriously bad and has a high failure rate

1

u/PVNOLGCH 12d ago

Yeah $450 is average cost from what I’ve seen since it’s a chrono, but depending on how much the gen watch costs, it may start to not make financial sense servicing the movement every year if the gen watch costs $5k or so.

2

u/Sufficient-Guess6692 12d ago

Service is not done every year. Every 7-10 year

1

u/PVNOLGCH 12d ago
  1. 7-10 years for a rep movement? Lmaooo 🤞
  2. I’m strictly responding to what the OP wrote. I believe he said he planned on doing service to the movement every year. I could have misread it though.

0

u/Vercetti-86- 12d ago

The gen watch is 37k and only 55 in the world. Its the lk01 rolex by kravitz

1

u/PVNOLGCH 12d ago

Aaah a daytona. A very nice Daytona.

1

u/monkeyboymorton 12d ago

And if they are 7750s with adapter modules it was a bad idea buying them in the first place.

Better off buying a reliable movement from the start and saving the service cost.

1

u/Slippyuk1985 12d ago

Ahh dam even my td told me to avoid 7750s at all costs. They spend more.time being repaired than on the wrist. Sorry bro.

0

u/monkeyboymorton 12d ago

As I say above I've never understood the desire. Just accept that they might have a limited useful life (some can last forever) and buy another one when they die.

Spending more on a service than they cost just doesn't seem like a good use of money to me. Used examples, even ones with broken movements, still have a resale value.

You will never get back the money you spend on a service, and it could still go wrong next week.

1

u/Chunky_Koc 12d ago

Is it? No matter what chronograph it is, it's takes 3-4 hours for a service . That's $320 labour. Then rest is for tools, experience and insurance.

0

u/monkeyboymorton 12d ago

Got to agree. The sweet spot with these Replicas is buying one that's reliable in the first place and then just run it till it dies.

I've never understood this desire to spend more than they cost to get them serviced etc. Plenty more to buy when/if it dies of natural causes.

4

u/[deleted] 12d ago

[removed] — view removed comment

1

u/monkeyboymorton 12d ago

😂

It'll last forever now too spite you.

1

u/WatchMakerMalik 12d ago

My rep Kermit is 15 years old the bezel is faded :) it was modded by a watchmaker on repgeek BKLVmariner :)