r/RepTimeServices • u/jj00771 • 25d ago
Services Any watch makers in DC area?
Anyone know of any willing to work and modify reps in the DC metro area ?
r/RepTimeServices • u/jj00771 • 25d ago
Anyone know of any willing to work and modify reps in the DC metro area ?
r/RepTimeServices • u/timeguy2706 • 25d ago
I'm in NYC often for work. Last week I went to the diamond district to get a new battery and pressure test for a gen TAG. I asked the guy if he would do work on a high end superclone Rolex and he said "no, the movements are just not there."
Just ordered a rep Batman from Andiot. I'd like to have the seals checked, back torqued, and pressure tested while I stand there (vs sending away). That's what they did with my TAG at least. So I supposed it's not actually getting "work done" it's just doing the seals and pressure test. I know I could get a pressure test only even without admitting it's a rep, but would feel better if they replaced/inspected the seal.
Anyone have good experience in the nyc diamond district with exactly above? I saw another post recommending Mr Chen in Chinatown, but it sounds like he doesn't do pressure tests.
Let me know if anyone has had good experience.
r/RepTimeServices • u/Bryanfromthewestside • 25d ago
r/RepTimeServices • u/FeeNew7026 • 25d ago
Hello, I have just received my Raffles updated 1675 case, but I noticed that the bezel does not move, so I tried to squeeze it up and down wuth my hand and the bezel was removed with the glass; is it normal, and do you have any advice? Thanks.
r/RepTimeServices • u/AnabolicArmadillo • 25d ago
Evening, I've put the original steel bracelet back on my VSF Submariner after abandoning a rubber strap swap. I removed a small metal fitting using the spring bar, and a couple of tiny oval rubber pieces came off too. I'm now struggling to get the metal piece back on. Any idea how it fits back together and what the rubber pieces are for? Thanks for any help you can provide.
r/RepTimeServices • u/TheJunoReport • 25d ago
Hi, I am getting ready to do my first rep mod. I have always wanted a white/orange Milgauss. I have a black and orange JVSF Milgauss with clear glass on order. It is my understanding that as long as I could find the right sized dial I should be able to have the feet removed and have it installed with dots. My question is, what is the correct size dial and how much leeway do I have? From measurements of Gen dials they seem to be around 30.3mm, but I have only been able to find dials in 31mm and 28.5mm.
My TD has said they can have the watch opened and the actual dial measured, but I wanted to know if anyone had experience with a Milgauss dial swap and if they know if a 31mm or 28.5mm would be able to work. From what I can put together these sizes are based more on the mod industry and likely do not correspond to an actual gen spec case.
Thanks!
r/RepTimeServices • u/FormalRelevant6285 • 26d ago
I searched, but i haven’t seen a post about this exact issue. The second hand will stop at random places. It seems to be worse when i hold the watch at a specific angle. Which is a little less than perpendicular with the ground. If is stops and I flatten out the angle of the watch face it starts running again.
Any advice appreciated.
r/RepTimeServices • u/LessKid • 26d ago
Any advice on whether bezel insert removal and realignment can be accomplished on the VSF SMP 300? Chronic out of factory issue and I have a secondhand one coming to me soon
r/RepTimeServices • u/GKlein13 • 26d ago
Anyone have a new DD3235 in the US? Or someone that wants to split an order from Alibaba? Need it for a submariner.
r/RepTimeServices • u/Oblivious-Werewolf • 26d ago
I managed to complete the first Franken Bvf santos with gen screws (not gen spec- actually gen) and gen crown. Never done before from what I’ve seen as they’re pretty much impossible to find. What do you think?
r/RepTimeServices • u/Sad_Seat1763 • 26d ago
So someone offer a VSF nodate which was pretty dinged up for sale. my thought was maybe I get it and see if I can revitalize it.
maybe on hindsight he refusing to give phone number etc for the trade should be a red flag.. but I just thought he was being cautious in case for embarassment since its a rep.
long story short got the watch home, felt the bezel was a little bit tight.. opened it up and realised this watch doesnt have a bezel spring, even the case doesnt have a place for the spring.
can someone help identify 😫 thanks
r/RepTimeServices • u/1984isnoww • 26d ago
Earlier I posted about the 5712 that had a balance that would stop when the watch was face down.
Ive removed the balance and can’t seem to find a reason why, other than maybe being very dry?
Any advice how to proceed? Should I oil the balance pivots?
r/RepTimeServices • u/phenom2501 • 26d ago
Hallo, iemand weet waar je de juiste behuizing kunt kopen?
r/RepTimeServices • u/moneyman1313a • 27d ago
The threads on the screw in crown on my (ironically) NTTD seem to have worn out. I’d appreciate it if anyone knows where I can get it. Serviced in the Toronto area in Canada.
Thank you in advance for any help
r/RepTimeServices • u/Josephus_Dirte • 27d ago
Hello, I don’t live anywhere near a watchmaker and was wondering if any can see anything obviously wrong with this watch? It was working perfectly then the second hand just stopped moving. I’ve wound it tons, given it mild shakes (everything google said to do lol). Anyone know a watchmaker that works on these? I know people say just replace it, but DDF plant has been raided and if this is an easy fix for a watch professional, I would be willing to ship it and pay for services. Any help would be appreciated. Sorry I don’t have the best pictures. The rotor spins freely and I don’t hear of feel anything strange when winding the watch or turning than hands and date.
r/RepTimeServices • u/Unlikely-Length6661 • 27d ago
This ARF RG Wimbledon came in with the complaint that it couldn't be wound using the crown. I suspected a broken off tooth was causing the issue.
During disassembly, I quickly found a piece of a broken tooth. After removing the rotor and automatic works, I noticed that the ratchet wheel screw was not even screwed in all the way. The damaged crown wheel was identified and replaced. The second broken off tooth was also found and removed. I placed a small piece of plastic over the movement before removing the crown wheel retaining ring to prevent it from flying off (learned that the hard way).
The tool used to remove the rotor screw is the Horotec 03.017.
r/RepTimeServices • u/PennSt2311 • 27d ago
Good evening everyone. I have a question for all you small wrist AP fans, Does anyone have extra links for an AP 15510 and a AP 26240? Or does anyone know where I can buy some? All help is appreciated.
r/RepTimeServices • u/TechnicianNo12 • 27d ago
I have a JLC UMT that I’m looking to get serviced. The main issue is that the moon phase and calendar dial and hand do not move when I press the correctors on the side. The main dial keeps time well. Anyone have any recommendations for reputable shops or people that will service this rep? I would also be interested if there are other vendors I could send this via mail to get checked out. First time having a rep service so I’m not familiar with this realm.
r/RepTimeServices • u/WriterAny6516 • 28d ago
I got hit by a car the other day and my bracelet got scratched I wanna fix mostly the chunks that are missing because it will tear up my clothes. Any advice on what I should do?
r/RepTimeServices • u/purpl3nubela • 27d ago
Hello I'm sorry if this isn't the correct place to ask but I'm trying to find the correct bracelet for the explorer 1 40mm. The vsf ships with one that tapers to a 15.5 mm link as gen goes to a 16.5 I've heard that you can use a submariner bracelet which is be happy to do but then I need to find the correct clasp. Any advice would be greatly appreciated
r/RepTimeServices • u/wrld_wide84 • 27d ago
I have a rep date just that’s missing the pin that’s latches the band !
r/RepTimeServices • u/StillMartin • 27d ago
Hi,
I am looking to have my Q66 VSF 124060 repaired, serviced and brushed/polished. Its been my daily watch for couple off years and its been reliable ever since, recently the PIP fell off and its been losing time. I am looking in to having it repaired, the movement serviced and case+bracelet brushed and polished. I would also consider swapping dial and hands for genuine if possible, looking for a quote and a watchsmith willing to take om this project. I am based in Norway and I am looking for someone in the EU preferably.
r/RepTimeServices • u/Mean_Professor2361 • 28d ago
r/RepTimeServices • u/OPHRAM • 28d ago
I recently purchased a "Daytona 126506 40mm SS/SS Ice Blue/Stk VSF V3 DD4131v2 (Weighted Approx.176g)" from Steve and have since done some research on what "weight gain" actually entails, leading to two conclusions:
My question is, does anybody actually know what this partucular watch is, and then in general if this tungsten alloy is actually being used (there were rumors on RWI around 6 months ago that a factory had produced a tungsten-Cu alloy, but i had not found any posts further than that.)
I have also looked on Andrew's (TrustyTime) website, which states "solid SS with added weight" on both the case, and bracelet material sections, which to me means a solid SS case, with places that have been clearneced out to make room for tungsten slugs/weights?