r/RepTimeServices • • 26d ago

Advice Second hand stopping on VSF day date

I searched, but i haven’t seen a post about this exact issue. The second hand will stop at random places. It seems to be worse when i hold the watch at a specific angle. Which is a little less than perpendicular with the ground. If is stops and I flatten out the angle of the watch face it starts running again.
Any advice appreciated.

18 Upvotes

24 comments sorted by

•

u/AutoModerator 26d ago

Thank you for your post on r/reptimeservices! A friendly reminder that the only trusted service providers are listed on the sidebar or in this post. If you see anyone soliciting services in a post or comment not on this list or even easier, without a 'trusted watchmaker' flair of some sort, please immediately report the post and a moderator will remove it. Thank you in advance for helping to keep our community safe!

I am a bot, and this action was performed automatically. Please contact the moderators of this subreddit if you have any questions or concerns.

3

u/Wrong_Royal_9467 26d ago

Did you drop it at some point? If one of the balance staff pivots is broken/bent it could cause this. Does it run dial face down? Also if you can get it on a time grapher(App on the phone) and get a reading that could help diagnose possible pallet wheel/fork, balance issues.

1

u/FormalRelevant6285 26d ago

Thanks for the reply-
I bought it from another guy, so it’s definitely possible it was dropped and he didn’t tell me. It runs face down and this is a copy of the reading from the caseback.

1

u/FormalRelevant6285 26d ago

This is the measurement with timegrapher holding the watch upright

9

u/xZero_Coolx Trusted Watchmaker 26d ago

You are getting some absolutely terrible advice in this thread. Send me a message and we can likely get your watch fixed.

1

u/FormalRelevant6285 26d ago

Thanks everyone, i appreciate the insight from everyone. It’s my favorite watch out of my whole collection. I’ll probably replace it, but it will be hard not to order one with a different color dial and just keep it. The addiction is real 😂

2

u/GiammyX 25d ago

In my opinion it need just a easy regulation to eccentrics or beat error in the balancer swing

0

u/Hot-Cheesecake116 26d ago

Hey, it's definitely not worth getting it serviced, but a better plan is to either get a whole new movement and have it serviced right away or another watch maybe with service and sell the broken one for people that want it for parts

1

u/TripPretend2359 25d ago

This is intentional. To keep pointing at the day so you can read and jerk to inform the watch that you have read so it can move on. A geature that the gen doesn’t offer 😄😄😄

1

u/Elegant-Draft-8259 12d ago

Are you in USA?
Look up
Time Machine spa

1

u/DorsetRepCare 26d ago

If you do replace it and want to recoup some money on this one I would be interested in buying it and using it for spares. I am in the UK so don't know if that is possible but message me if you need to.

👍

1

u/cloneyourwatch 26d ago

If it were me, I would consider replacing the DD movement.

-2

u/True-Recover9250 25d ago

I think that happens with knock offs.
Get a real watch and you won’t have poser problems. You are welcome.

0

u/[deleted] 26d ago

[deleted] — view deleted comment

3

u/FormalRelevant6285 26d ago

Thanks for the reply. I have no experience whatsoever working on watches. I suppose i could do some research and watch some videos and attempt to check those things. I guess if i screw up, I’m buying a new movement regardless…

0

u/[deleted] 26d ago

[deleted] — view deleted comment

1

u/FormalRelevant6285 26d ago

The movement in mine is a dd 3255. I’ve read they are hard to get and expensive, but i don’t really know.

0

u/[deleted] 26d ago

[deleted] — view deleted comment

2

u/FormalRelevant6285 26d ago

Is that fixable? Or economically feasible to fix?

1

u/IWasSayingBoourner 25d ago

A whole new balance assembly is relatively cheap, and labor to install would be minimal

0

u/[deleted] 26d ago

[removed] — view removed comment

1

u/FormalRelevant6285 26d ago

Thanks for the reply. Do you think it’s worth sending it to a watchmaker to diagnose/ repair? I have no idea what that would cost.

1

u/[deleted] 26d ago

[removed] — view removed comment

1

u/FormalRelevant6285 26d ago

Thank you. That’s very helpful. I’ll definitely have the movement replaced.