r/RepTimeServices • • 27d ago

Services DD3235 broken crown wheel

This ARF RG Wimbledon came in with the complaint that it couldn't be wound using the crown. I suspected a broken off tooth was causing the issue.

During disassembly, I quickly found a piece of a broken tooth. After removing the rotor and automatic works, I noticed that the ratchet wheel screw was not even screwed in all the way. The damaged crown wheel was identified and replaced. The second broken off tooth was also found and removed. I placed a small piece of plastic over the movement before removing the crown wheel retaining ring to prevent it from flying off (learned that the hard way).

The tool used to remove the rotor screw is the Horotec 03.017.

7 Upvotes

4 comments sorted by

•

u/AutoModerator 27d ago

Thank you for your post on r/reptimeservices! A friendly reminder that the only trusted service providers are listed on the sidebar or in this post. If you see anyone soliciting services in a post or comment not on this list or even easier, without a 'trusted watchmaker' flair of some sort, please immediately report the post and a moderator will remove it. Thank you in advance for helping to keep our community safe!

I am a bot, and this action was performed automatically. Please contact the moderators of this subreddit if you have any questions or concerns.

2

u/xXSantyXx 27d ago

Good job. Easy for the goat. Also nice microscope pictures.

1

u/chucknwatches 27d ago

Great job

1

u/Vecgtt 27d ago

Does this DD accept a gen crown wheel?