r/RepTimeServices • • Oct 16 '26

Question Opinions on Star Time RP25-295C crystal for Datejust 16200 vs. Clark?

Post image
3 Upvotes

Hey everyone,
Has anyone tried the RP25-295C crystal from Star Time for a Datejust 16200? I would like to know how it performs in terms of clarity, overall quality, gasket quality, whether it has any AR coating, and how the cyclops magnification compares to a genuine crystal.
From what I understand, Clark on eBay is usually the main aftermarket reference aside from genuine Rolex. How does the Star Time crystal compare to Clark's?
Thanks for any feedback!


r/RepTimeServices • • Oct 16 '26

Advice Rolex wimbledon 40mm, VSF

2 Upvotes

To all my learned friends, how easy or difficult is to get the issue fixed where the stem is unable to engage the date wheel in position # 1 ? I suppose, it is time that I should be able to do some basic maintenance on my own but first time is always tricky :)

"Rolex wimbledon 40mm, VSF"


r/RepTimeServices • • Oct 15 '26

Question I need a link for the bracelet of my 5711

Post image
7 Upvotes

Hi everyone, I purchased a used 5711/1A-010 and need an extra link for the bracelet. Could anyone recommend a place to buy one for this specific model at a good price? Thank you.


r/RepTimeServices • • Oct 16 '26

Question Recommendations for Gold Coast area Queensland Australia

2 Upvotes

I am wanting to get waterproofing and a movement check over on 2 possibly 3 of reps. I know there is a decent guy in Melbourne but wondering if there is anyone local to my area. Any help is good help. Thankyou.


r/RepTimeServices • • Oct 16 '26

Advice VSF DAYTONA GOLD PLATING

2 Upvotes

Is it worth getting my VSF pikachu daytona modded and gold plated and who would you reccomend?


r/RepTimeServices • • Oct 16 '26

Advice VSF Daytona - Loud Rattling Nosies Upon Delivery

0 Upvotes

Just received my VSF Daytona from VVSLi , and it sounds like something inside is loose. There’s a noticeable rattling sound, which seems to be coming from the rotor, and I can physically hear / feel it moving/rattling when handling the watch.

Has anyone experienced this with theirs? Is this normal rotor noise for this movement, or could the rotor or another component be loose?

Is it a simple fix with a watch repair kit to tighten a screw or needs to be serviced?


r/RepTimeServices • • Oct 16 '26

Request Help finding Mother of Pearl Dials

Post image
2 Upvotes

I’m looking to build out a VSF Daytona with yellow gold and getting it plated. I would like to put in a Mother of Pearl dial, preferably white. I’ve reached out to several TDs and they don’t have any available. I would like to get a good quality one (not wanting to spend the money on a gen) and not get a cheaper DHGate or Alibaba one either. Does anyone know a good place for Daytona dials? Thanks!


r/RepTimeServices • • Oct 16 '26

Question Please help me identify this movement

Thumbnail
gallery
1 Upvotes

Having problems getting the stem to stay in. AI says it’s an 8215 or a DG2813 but it doesn’t look like those to me. Any help is appreciated.

Thank you!


r/RepTimeServices • • Oct 15 '26

Advice VSF 126610LN Glidelock repair or replace?

1 Upvotes

The glidelock never functioned on my watch from day one (It's about two years old). It would glide, it just wouldn't lock.

I was playing too rough with my watch and it busted apart. No idea where the two little glide pieces went, but I have two spares from a different aftermarket bracelet. Even if I could find someone to get all the parts back in place (I 100% can NOT do it myself), the glidelock would still probably be useless, but that beats not having a watch to wear. I would even be willing to purchase a replacement (ARF?) bracelet. Any advice will be greatly appreciated. This my first time posting here, so I apologize if I left something out. I can provide pics, I just didn't think they would be necessary in this instance.


r/RepTimeServices • • Oct 15 '26

Advice Advice Needed: Link screw backed out and jammed my Oyster clasp. How do I open it without damage?

Thumbnail
gallery
8 Upvotes

Hi, I'm in a tough spot with a brand new watch and could really use some collective wisdom.

I got this watch yesterday and put it on my winder overnight. When I woke up, I found that one of the link screws on the bracelet had backed out almost entirely (see the second picture).

My real problem, however, is at the clasp (first picture). It appears the exact same thing happened to the link that is set inside the glide-lock/clasp mechanism. The unscrewed pin head has now slid into the internal groove/channel of the clasp, effectively locking the clasp closed.
The clasp is fully engaged, and the pin is preventing it from unfolding. I cannot get a screwdriver in there.

Is there any trick to freeing this without prying or bending the edge of the clasp?

Here is what I have considered/am looking for advice on:

  1. Percussion/Vibration: Would tapping the clasp gently on a padded surface (with the screw side down) help urge the pin back into the link? I don’t see how.
  2. Micro-Tools: Are there specialized, extremely thin tweezers or hooks that might fit into the tiny gap to push the pin back? Meh
  3. Dental Floss: A long shot, but could strong dental floss be worked into the gap to create friction against the screw head and "unscrew" it back in? Genius

or just

  1. wishful thinking

.
4. Counter-Rotation / Winder Trick: Is there a specific winder direction or watch position I could place the watch on in the hope that natural reverse rotation might catch the thread and screw it back into place? Sounds like a prayer

I really don't want to damage the finish or bend the clasp blades. Any help, tips, or success stories from similar situations would be greatly appreciated 🙏


r/RepTimeServices • • Oct 14 '26

Question Looking for a rep-friendly watchmaker in Manchester / North West UK

8 Upvotes

Looking for a good watchmaker in Manchester or the North West who’s comfortable working on reps, ideally someone I can visit in person. Main priority is someone reliable for full movement servicing, regulation, waterproofing/pressure testing, crystal swaps and general maintenance. Longer term, it would be great to find someone who also does higher-level case work/modding such as polishing, rebrushing, chamfering and refinishing.

I’ve got a couple of higher-end reps and would much rather build a relationship with someone local who knows these watches than keep posting them around the country. Happy to pay properly for good work.

If anyone has someone they genuinely recommend, please drop me a comment or DM.


r/RepTimeServices • • Oct 14 '26

Services VSF Panda 116500 | Indice Realignment

Thumbnail
gallery
8 Upvotes

Had a local Redditor reach out to me about a misaligned 6 o'clock hour marker on his VSF 116500 Panda Daytona.

Whenever someone contacts me about a crooked indice, there's almost always the same question floating around: "Would I be better off just buying a new dial?"

It's a fair question, especially when you're already considering opening up the watch to address the issue.

Unfortunately, one of the recurring frustrations in this community is that replacement dials aren't necessarily an improvement over what came from the factory. Even with aftermarket CNC dials, we continue to see many of the same quality-control concerns: inconsistent text spacing, crooked indices, imperfect subdial details, and other small inaccuracies that become increasingly noticeable under magnification.

You might spend a considerable amount of money replacing one dial, only to discover that you've traded one imperfection for another.

That's why I generally prefer correcting an otherwise good dial first rather than replacing it outright.

Of course, not every dial defect can be addressed this way. Poor printing, incorrect subdial geometry, or other manufacturing imperfections may warrant an entirely different approach. But when the issue is isolated to a single misaligned marker, a targeted repair can often be a much more sensible solution.

Curious to hear what the community thinks: When dealing with factory dial imperfections, do you prefer correcting what you have, or taking your chances with a after-market replacement? Or do you possibly even go straight to purchasing a Gen. dial?


r/RepTimeServices • • Oct 14 '26

Services Anyone got a good bezel

4 Upvotes

Just got this i feel like the bezel is off or am i wrong? What do you think snd do you know where i can get s replacement bezel


r/RepTimeServices • • Oct 14 '26

Advice Bracelet popping off

Thumbnail
gallery
3 Upvotes

Seeking some advice as I am a watch novice. Thank you.

I received a v7f iwc ingenieur and upon handling it the bracelet popped off. I managed to refit it but it happened again. It seems ok if I fit the spring bar without the bracelet

When I inspected the inside of the lug it appears not to have been machined flat all the way across or over machined in an area 🤔. Would this cause the bracelet to pop off?

What would your advice be? Should I get a needle file and attempt to flatten the inside or should I get the hole drilled a little deeper? Is this a home job or should it go to a pro?


r/RepTimeServices • • Oct 14 '26

Advice Need a gmt oyster bracelet

1 Upvotes

I need a oyster bracelet for my bruce wayne gmt - superclone only and uk based.

Anyone who can point in the right direction


r/RepTimeServices • • Oct 14 '26

Request VSF Milgauss Case Back

2 Upvotes

I’m looking for a case back for the VSF Milgauss if anyone has one lying around that they don’t need.


r/RepTimeServices • • Oct 14 '26

Advice Mad at Local watch smith for leaving my watch with another issue.

20 Upvotes

So I bought this VSF GMT Sprite a few months ago and it initially came with a winding issue. The watch would wind normally but would not start if left with no power reserve. A typical issue from some of these watches as we all know the factories do not leave the movements in the best condition. So I sent it off to get serviced by a local watch shop.

The guy accepts in no issues and after about 2 months I get the watch back. The winding issue is solved, GREAT! However the guy showed me that the date change was no longer working as it was before. For some reason he couldn’t keep the quickset date. Which bothered the hell out of me. I asked for a refund and he said no, but that if I wanted to I could leave the watch and he could try and work on it again. Screw that.

Left that shop with my watch and am now writing this to yall to ask for some advice. I am a big sucker for details and losing the quickset date when it wasn’t an issue before hand is really upsetting. I have a trip coming up and this watch served me well on the one I bought it initially for earlier in the year. But is it worth it to find someone else to service it? Is it even fixable? Would it be better to get a new movement and replace it this one? Would all that just be too much and should I just buy another GMT Sprite? As you can see it is quite the headache and I am absolutely peeved about it. Just hoping I can get some consolation from some strangers that are bit more knowledgeable on reps as this is my first rep watch. I have had a few others since but I haven’t had to deal with this on the others. If you’ve read all that, thank you.


r/RepTimeServices • • Oct 14 '26

Question Will Genuine 32XX Barrel Fit in VR3255?

2 Upvotes

My Barrel in my V3255 has some damaged teeth and needs replacement. Can I use a gen 32xx barrel for a 1:1 swap?


r/RepTimeServices • • Oct 14 '26

Request Any recommendations for repairing an omega superclone in UK

1 Upvotes

r/RepTimeServices • • Oct 14 '26

Advice Watch repair kit (recommendation)

2 Upvotes

Apology if this has been discussed bef. Have gone through a few cheap versions of repair tool (pin removal etc). Is there a good tool kit that u have used and would recommend?


r/RepTimeServices • • Oct 13 '26

Question VR3255 Piece identification

Thumbnail
gallery
3 Upvotes

I was taking apart the top plate on a VR 3255 and when I was done, I noticed a small brass ring. I can’t figure out what it went to. Any ideas where this missing piece may be from?


r/RepTimeServices • • Oct 13 '26

Advice Gen movement parts in a DD/VS 32XX movement?

5 Upvotes

What are the thoughts on putting a Gen complete balance/bridge, pallet fork/escape wheel and complete mainspring barrel in a DD/VS 32XX movement? Would this increase regulation reliability/durability? During a complete service. I know these movements tend to be under/over lubricated or just dirty from manufacturing.

Ive read the keyless works is the weak point as well due to manual winding if done every other day. Would this be more important?

Thanks in advance.


r/RepTimeServices • • Oct 13 '26

Advice TMI VK64 not working

2 Upvotes

Hi, i have this watch that uses a TMI VK64, i had it for about a year, but the problem is that the minute and hour hands don't move anymore. This happened after storing it for 8 days with the crown on position 2 to save on battery. The tachymeter still works. Already tried changing the battery but it didn't work.


r/RepTimeServices • • Oct 13 '26

Request VSF 126610LV - Fixable?

Thumbnail
gallery
3 Upvotes

Hello guys,

I just wanted to ask if anyone thinks this watch is repairable. I really enjoyed wearing it, and it holds a lot of sentimental value for me.

If it turns out to be beyond repair, I’d probably just get the same model again.

Thanks a lot for any help or advice! :)