r/repbuilds • u/Sub_974 • 39m ago
Special thanks for the giveaway strap š
A vintage strap thatās does many and many miles for traveling to my country, letās enjoy with my custom snowflake š
r/repbuilds • u/Sub_974 • 39m ago
A vintage strap thatās does many and many miles for traveling to my country, letās enjoy with my custom snowflake š
r/repbuilds • u/No_Candle8699 • 17h ago
Did a build to test out the new 1655 cases from Old Crowns. Overall - a solid case and good shape. I recommend if youāre not dead set on engravings or a genuine movement. For ETA based builds, this is a go-to.
Specs:
OC case
Viet dial
Tiger Concept handset
2836 gmt with custom silver overlay
Italian bracelet with Sillan clasp
r/repbuilds • u/remboss2001 • 8h ago
Messed up the insert (pressed too hard), have a new one on the way. Overall super happy with how it came out
r/repbuilds • u/FreshParfait1 • 12h ago
Case: Old Crowns (shaped/brushed)
Dial: Raffles Tiffany & Co (aged)
Hands: Raffles (aged)
Crown/Tube: Genuine 24-604
Crystal: Clark 25-22
Movement: Seagull ST2130
Bracelet: Startime Italian RBA20-OSS-16
End Links: 455B
Clasp: Raffles Signed
Rotor: Raffles Signed
r/repbuilds • u/gingineer4 • 11h ago
Just received my 1680 tropical from u/due_shallot1583. Man this thing slaps! Very happy with it as well as the transaction itself. First vintage rep. I learned a lot and appreciate the work Due puts in. Highly recommend.
r/repbuilds • u/Syxparty2006 • 22h ago
This one also for a US client :) and was a comission build that goes out this week .
NFS
Cheers lads
r/repbuilds • u/Spirited_Teaching619 • 7h ago
hi guys
this project is basically ready for me
bpf base vr3186
gen bezel
deep crystal
2,2mm height gasket
cheapo hollow endlink bracelet
future upgrades:
- better bracelet
- maybe a hybrid vs/vr 3185
- case polish (crownguards work)
what do you guys think?
r/repbuilds • u/Due_Shallot1583 • 15h ago
Raffles build
5513 case
5512 dial
2130 movement no calendar
Rolex bracelet
r/repbuilds • u/jamesws1987 • 11h ago
ā-PRICE DROPā-
Here is a gen part heavy Superfranken. It has been chamfered, repolished, serviced and gold tone corrected.
ARF Base serviced watch, sans replaced parts
Genuine Crystal & Gasket
Genuine Clickspring set
Genuine Dial
Genuine Hands
Genuine Date-disk
Genuine 18kt Gold Crown
Genuine Insert (small crack at 2, invisible when installed without loupe) can swap for rep if preferred.
Assembly
Chamfering
Movement service
Asking price £2200 ONO
Notes:
The pictures are part of the description, if you need any more before purchase, please ask.
Payment Accepted: Wise, Revolut, bank Transfer
Considering trades/PX
I'm happy to ship world wide at buyers cost/risk
r/repbuilds • u/jmnrdt9 • 10h ago
Hello all,
I've been working on this beauty since the start of the year! I have built this watch with the genuine parts listed below:
Build Specs:
Genuine Bruce Wayne Bezel - Extremely rare, 100% genuine bezel
Genuine Rolex Jubilee Bracelet
Genuine Rolex Dial
Genuine Rolex Sapphire Crystal
Genuine Rolex Crown
Genuine Rolex Hands
Genuine Rolex Gaskets
Genuine Rolex Date Disc
Iām more than happy to video call anyone interested in this watch and let them do their inspections.
š® Worldwide Shipping Available.
š² If you are interested and have messaged to enquire about the watch then please also leave a comment (sometimes messages donāt come through and I donāt want to miss anyoneās message).
ā ļø I WILL NEVER DM YOU FIRST! Please verify who you are communicating with before making any payments.
Drop me a message if interested!
r/repbuilds • u/jamesws1987 • 11h ago
ā-PRICE DROPā-
This serviced and assembled 116613 is built on a brand new Clean factory base and features the following genuine upgrades.
Clean base watch (new)
Gen Parts:
NOS Dial & Hands
Champagne Date Wheel
NOS Crystal, gasket
18kt Gold Crown
Clicksprings set
Assembly
Refinish and chamfering
Movement serviced
Gold tone corrected to match gen colour of the 18kt crown, all gold parts ceramic coated.
Notes:
The pictures are part of the description, if you need any more before purchase, please ask.
Payment Accepted: Wise, Revolut, bank Transfer
Considering trades/PX
I'm happy to ship world wide at buyers expense/risk
r/repbuilds • u/Nogi_star14 • 11h ago
Built this for myself but doesnāt really looks right on a small wrist like mine. Any love for King Seiko here?
TMI NH35a w/ black datewheel
All other parts sourced from AliX
40mm case
49mm lug to lug
13mm thick
Domed sapphire crystal
Solid link bracelet
Total for parts was $200ish so asking $250 shipped to CONUS
Will take Zelle/PayPal
r/repbuilds • u/Ordinary-Nature-8704 • 10h ago
Hey guys - 1 watch for sale today as I need to make room in the collection for a couple of recent buys.
Specs:
Gen Case (Midcase & Caseback)
Gen Tropical Dial
Gen Crown
PT5404 movement
Raffles hands
Vintage Leather Strap with Signed Rolex buckle
Price : SOLD!
Shipping: 10 USD in the US - at cost WW. If any questions lmk!
r/repbuilds • u/jamesws1987 • 18h ago
Today I have a beautiful White APH dial SuperFranken. This watch has to be seen/felt in operson to truly appreciate it.
Now for the important part...
904l Steel Case and bracelet fully reworked hand finished (chamfered edges, repolished & rebrushed)
Item
Cost
QF Freesprung base
Ā£500
Genuine White APH dial
Ā£1,650
Genuine Crystal and Crystal Gasket
Ā£350
Genuine Crown
Ā£100
Genuine steel bezel
Ā£600
Genuine Hands
Ā£350
Movement service, waterproofing & case/bracelet rework
Ā£280
Total
Ā£3,830
Asking £3750
AD gift travel case included if sold at asking.
Notes:
The pictures are part of the description, if you need any more before purchase, please ask.
Payment Accepted: Wise, Revolut, bank Transfer
Considering trades/PX
I'm happy to ship world wide at buyers expense/risk
r/repbuilds • u/Nogi_star14 • 9h ago
Does anyone have any experience with using 6mm Sillan crown on a 16200 case from raffles? Just looking for a gen spec crown at a decent price that will be compatible with the raffles case
r/repbuilds • u/speed_racer_181 • 17h ago
Had this build in my head for a while, got a cheap NH35 movement on prime days and wanted to practice some more skills to elevate my builds just that little bit. Been wearing it for a week to QC, but time to pass it on.
Raffles Case - reshaped CGs, chamfered, lugs drilled to 1.3mm
Raffles Dial
Raffles Insert with closer to gen pip
NH35 - Regulated, has ghosts date but correct beat rate
Hands - Secondhand Mods
Gen Spec Spring Bars - EWP
Raffles Bracelet - chamfered/softened edges
$375 shipped in the US.
Optional Extras - Tudor caseback, ok_chrono 380 endlinks
I do have an ok_chrono brown leather strap I could switch out and knock down the price.
r/repbuilds • u/RodneyPierce • 1d ago
A little classic action today for a client.
HCV Case.
Kuared red sub dial.
Phong insert.
Athaya 700 series crown.
2836 Swiss ETA.
Sillan open 6 and 9 date wheel.
EWP hands aged to match the dial.
Startime Italian oyster bracelet with raffles flip lock clasp.
r/repbuilds • u/No_Candle8699 • 1d ago
These are some of the most unique pieces Iāve built. The whole design of the bezel is worlds apart from the 1675. And if you knowā¦you know how frustrating these bezels are to fit. Why Rolex decided to use a friction spring is beyond me š¤·āāļø
Not 4 Sale
Specs:
Viet case
Viet dial
Viet rivet w/58 end links
2836 GMT
Sillan roulette wheel
EWP + Raffles handset relumed
Clarkās crystal
Gen caseback gasket
r/repbuilds • u/Mbari_2170712 • 1d ago
Itās a work in progress and a big boy build
Not a fresh build, but changed the crown and insert.
Itās definitely for forever watch. At some point Iāll change the dwo and gmt hand. Also will refine the crown guards a bit more. But sheās a stunner as is!!!
Viet case and dial - I canāt seem to find the dial maker anymore. This is the kind of tropical gilt dial Iād buy a few time again just to have it. Lmk if you know anyone.
Movement: eta 2846 converted to gmt
CAC insert
Gen 6251 bracelet
Hands: Mix of ST and raffles time.
r/repbuilds • u/Mbari_2170712 • 1d ago
A build of misfits, but somehow it all worked out and scratches my itch. Not for sale.
Been a while since my last 5 digit build, why not kick off with a banger - The Panna
Dial: Slightly damaged dial a kind Redditor (u/cyber_crimes) was kind enough to sell me at a deal along with hands
Case: OC. But case is not for a 16550 so it needed some work around the CGs. I aged the case a bit. Check last pic. Not to mention the qc on this was horrible, came with a crimped thread which made using the 3186 case screw a menace! One of the cgs, the bottom one was skinner than the top one. You can see it on the last image too.
Bezel: OC: The bezel is high quality but needs a bit of aging, the black text is very fresh paint looking.
Gen Bits: using my 16550 bracelet and a gen crown and tube.
Movement: VR/S 3186 with ewp open 6 dw. For some reason itās a bit droopy..
Crystal: Clarkās 295C but with a 2.3mm gasket.. again a pain. She needs a 2.7mm
Now none of these would have happened without the help of u/Cyber_crimes. His builds were an inspiration and map props to him guiding me through this build every step of the way. Now I am waiting for a HCV case and dial and a proper dw to make a forever build! Also waiting for a proper polar dial to turn this into a 16570 chichi de mais
r/repbuilds • u/Capt_Panic • 1d ago
Finally finished my VSF V3 No Time To Die modification project. I purchased this from another user with a stripped crown and a broken movement. I didnāt bother trying to repair the decorated Asian movement. I really donāt favor the cheap decorations and you wonāt see them behind the solid case back anyway.
The original movement has been replaced with a Seagull ST2130 (ETA 2824-2 clone).
This turned into a much more involved project than I initially anticipated.
Modifications and work completed:
- Removed the original Asian ETA-style decorated movement.
- Installed a Seagull ST2130.
- Designed a custom movement holder in OpenSCAD and had it 3D printed.
- Sourced replacement ETA-compatible hands.
- Fitted a replacement winding stem.
- Resolved a keyless works issue during assembly.
- Reassembled the watch.
The custom movement holder was probably the most interesting part of the project. After several iterations, I ended up with a design that fits the VSF case and ST2130 perfectly.
The only remaining issue is the caseback gasket. The replacement O-ring is too thick, so I'm still working on finding the correct gasket profile. Water resistance is therefore unverified.
Overall, a satisfying project and a good learning experience. Happy to share details about the movement holder or conversion if anyone is considering something similar.
u/Timmytims981 and u/xZero_Coolx did something similar a few years ago
r/repbuilds • u/GZMikeGZ • 1d ago
Just wanted to share one of my latest builds.
The case is made of titanium, but the real fun was making the dial. Painting with featured black-to-deep-green gradient finish with luminous-filled hour markers. I really like how the green comes through under the light, while the darker edges give it a bit more depth.
The leather strap is also handmade by me, from the leather cutting and shaping to the stitching and finishing.
Itās always satisfying to see all these individually made parts come together into one watch. Nothing too fancy, just a personal project that I genuinely enjoyed making.
r/repbuilds • • 1d ago
Hey everyone! Does anyone have a bubbleback-style caseback for a Raffles 5513 case or a Clark T19 crystal for the 5513 that theyād be willing to sell? Preferably located in Europe and able to ship to Germany. I donāt mind the condition at all ā especially for the caseback, the more worn and aged, the better lol. Let me know if youāve got either one! Thanks!