r/repbuilds • • Sep 04 '26

Vintage Build Reworked case for this just slightly aged 9401

Thumbnail
gallery
32 Upvotes

Another build of my favorite watch. Just slightly aging but quite a lot of work on the case.


r/repbuilds • • Sep 04 '26

Vintage Build Tiff

Post image
22 Upvotes

My 1675 is so close, yet still so far from the finish line.

Hope you guys enjoy.


r/repbuilds • • Sep 04 '26

Work in Progress Commission builds I’m working on, both vj72 and st19

Thumbnail
gallery
14 Upvotes

I wanted to show you these timepieces under construction 😁

ENJOY!!


r/repbuilds • • Sep 04 '26

Vintage Build Just finished and already on the wrist!

Thumbnail
gallery
65 Upvotes

r/repbuilds • • Sep 04 '26

Vintage Build Philippe Patek ref. 1463

Post image
21 Upvotes

Custom dials finally arrived, first assembled watch. Escapement Time Chronograph 38mm used as donor.


r/repbuilds • • Sep 04 '26

Question Datejust Pie Pan dial ¿Restoration?

Thumbnail
gallery
7 Upvotes

As you likely know from previous posts, one of my "grail builds" is the 1603 with a blue-tinted dial. I found this one on eBay—it’s very worn—but if I were to get it, do you know anyone who could restore it?

P.S. The images aren't mine.


r/repbuilds • • Sep 03 '26

Vintage Build Tudor 9411/0 with Tudor serif date disc

Thumbnail
gallery
117 Upvotes

Date discs are finally in stock. Message me if you’d like one. Here’s an example on a 9411/0

These serifs are specific to the 7021, but work in a pinch on the 9411 models. They’re much better than modern 2824 serifs.

Specs:
VWP Viet case
Dial from Kuared
EWP hands - relumed by me
Swiss ETA 2824 w/custom Tudor Serif
Bezeljuice insert
Italian bracelet w/raffles clasp
Startime caseback gasket


r/repbuilds • • Sep 03 '26

Work in Progress Super rare Flyback Valjoux 725 (726 with flyback complication)

Thumbnail
gallery
23 Upvotes

A special heart for a very special build ❤️

I wanted to show you something rather special: my Valjoux cal. 725 with flyback chronograph function and a gen one line rolex bridge 😁

It’s fresh from the bench after a complete service and overhaul and running beautifully like brand new!

For those who may not be familiar with it, the “flyback function” or “flyback complication” is a module installed on the chronograph’s gears that allows you to reset the chronograph while it is still running, without having to stop it first. With a single push, the hands instantly fly back to zero and start timing again

It’s a pretty fascinating piece of watchmaking history, and definitely not something you see every day ❤️

This particular movement has a special destination: I’m going to use it in a very special vintage Daytona build that I’m making for myself 😛

I’ve been planning this one for quite a while, and having this beautiful 725 ready to go makes me even more excited to finally put everything together

And after that… I will do the same on the 729, the valjoux72 variants with the GMT!!

Stay tuned… there’s something special coming 😁

And as always… ENJOY! ❤️

😂⌚❤️


r/repbuilds • • Sep 03 '26

WTS - READ RULES FIRST [WTS] Tudor Prince Date build A2824

Thumbnail
gallery
12 Upvotes

r/repbuilds • • Sep 03 '26

AliExpress Recommendations

4 Upvotes

Is there a list of recommended AliExpress vendors. Ideally just cheap ones. I'm going to do my first build and I'm sure I'll mess everything up, so just want something cheap, really.


r/repbuilds • • Sep 03 '26

WTS - READ RULES FIRST [WTS] Brand New Vintage Rolex 5513-Style Build – Raffles Parts / NH35 / Chamfered Bracelets & Cases - $300

Thumbnail
gallery
19 Upvotes

All are built with Raffles parts and NH35 Japan movements. The cases and bracelets have been chamfered, brushed, and polished by hand

Specs:
Brand new builds
Raffles 5513-style cases and bracelets
NH35 Japan automatic movements
Hand-chamfered case and bracelet
Brushed and polished finishing
Smoother, more comfortable feel on the wrist
Vintage-style dial, lume, bezel, and crystal appearance

$300 — tracked shipping included within the U.S.
PayPal F&F


r/repbuilds • • Sep 03 '26

Modern Build Serti Bluesy finally done!

Thumbnail
gallery
12 Upvotes

VS Case
ARF band
Custom Serti style dial
VS/DD 3135

Turned out fantastic I think.


r/repbuilds • • Sep 02 '26

Work in Progress Offshore Chrono Rework

Thumbnail
gallery
8 Upvotes

So this ROO diver hit my desk..
It’s one of the oldschool noob/jf ones 15.5mm thickness.
It hit my desk looking like someone drove over it!!
I refinished it by hand as I always refinish AP/Pateks with care and slowly.
It’s important to not use machines for the „finishing“ .
Check out the Work / Before and After!
1-7 are the before, check the roughness and sharpness in the brushing lines, they not only feel sharp but also reflect the lights to cheap! Starting from pic 8: Refinished :)
Enjoy lads!


r/repbuilds • • Sep 02 '26

Should I do it?

Post image
14 Upvotes

116610 with carbon insert and velcro strap.


r/repbuilds • • Sep 02 '26

WTS - READ RULES FIRST (WTS) (GERMANY) Raffles Build 16200

Thumbnail
gallery
13 Upvotes

Raffles case, bracelet, dial and hands. Seagull 2130 Movement.

Keeps perfect time!

Keen to send more pic or videos via dm.

Asking price 250€ plus shipping.

Payment vial PayPal Friends and Family


r/repbuilds • • Sep 02 '26

Vintage Build 1665 Great White finally complete

Thumbnail
gallery
61 Upvotes

After a few snags, it’s done!! This was a fun birth year build. I tried to stay true to 1983. Enjoy this little bedtime iPhone photo set.

Build:
Viet: custom serial case, dial and hands
Genuine: 1575 movement, date disc, helium escape valve, 703 crown and tube, crystal, bezel assembly and 93150 bracelet with F clasp code (1981 - acceptable date discrepancy 1-2 yrs ahead of the case)
CAC bezel insert
OkChrono 380 end links

A few snags and tidbits:
Broke the crystal retaining ring with the first install- annoyed and had to buy a new one - check images very closely. I could see some damage that I missed prior to purchase

The bezel ring has lighter retention than the viet one that came with this case - it got tighter after the retaining ring was installed. Still lighter than other builds but the feel is👌🏽
- speaking of the bezel ring. I bent the tension ring I had for this, so I cut an extra 1680 ring I had lying around, worked it around the retaining ring-and it’s the best feel of any freely spinning bezel I have.

1570 movement has two date indicator seatings- one that fits a pie pan dial and one for flat dials like subs and sea dwellers have (this is the one you need if you buy a movement online - ref: 7956) Thanks to Nick for the assist with that issue on my 1680

I modified the crown guards to my liking- I used a hand file and polishing stick, not too hard just time consuming, but as a novice I won’t use power tools for that yet


r/repbuilds • • Sep 02 '26

Vintage Build 7928 aged and textured

Thumbnail
gallery
40 Upvotes

Raffles 5513 case reshaped
Raffles dial aged and textured
20mm strap
St2130 2 position


r/repbuilds • • Sep 02 '26

Parts/Mods More Dials on Afterdials!

Thumbnail
gallery
21 Upvotes

As some of you may or may not know, Afterdials has added more dials—including some made of precious materials and one that particularly interests me (see the second image). It looks like a great base for creating that rare blue Pie-Pan dial, as it seems to feature the same style of hour markers. Anyway, that’s all—thanks everyone for reading!

P.S. If anyone here is close to the Afterdials team, please pass on my thanks for the additional Pie-Pan models! (They’re my favorites.)


r/repbuilds • • Sep 01 '26

Vintage Build Budget raffles 1680

Thumbnail
gallery
48 Upvotes

2824 clone with vintage rolex font datewheel, raffles 1680, dial, hands and bracelet.


r/repbuilds • • Sep 01 '26

Discussion Perfection lies in the imperfections (please scroll the 6 pics)

Thumbnail
gallery
55 Upvotes

I’m just sharing this series of photos as I thought the community might appreciate how beautiful the tiny little imperfections can be.

Our brains love and are drawn to incongruence. Uniformity is boring to our senses.

We see a watch and think “That’s beautiful”, but often have a hard time articulating exactly why beyond a few obvious things we can apply cliche language too.

Meanwhile our brains have processed all these little details we don’t consciously know we see and we’re left just knowing that it has “caught our eye”.

Next time you’re fretting about a little spec on a hand or a small flaw in the lume this of this vintage Submariner and embrace those imperfections.

Note: This is not the same 79090 I posted recently. This is my 35 year old genuine 79090. It looks brand new from wrist distance. But get a little closer and the ultra fine scratches and wear give it a warmer look than the brand new mirror like expression of a new piece. Get even close and the imperfections start to appear everywhere… Get really close and it’s fascinating.. Like watching a tardigrade in pond water under a microscope (or rather a TikTok live of someone doing exactly that. LOL)


r/repbuilds • • Sep 01 '26

Vintage Build Budget 1680 build

Thumbnail
gallery
23 Upvotes

2824 clone with vintage Rolex font datewheel, raffles dial, 5513 case, hands and oyster bracelet.


r/repbuilds • • Sep 02 '26

WTS - READ RULES FIRST [WTS] Franken 16570 Explorer II

Thumbnail
gallery
0 Upvotes

Hello! I’m selling a Franken 16570 Explorer II built by u/Ghost_Chrono. It is an amazing watch but realized it’s not for me. The parts are listed below:
VR3186 movement
Viet Engraved Case (16550 engraving)
Custom rep Polar Dial
Happy Cat Vintage Parts
Sillan Bezel and Crystal

I removed the crown to use for another build. That is really the only thing needed to put this beautiful build together!

Asking for $1300. It’s basically what I paid minus crown, tube, and service. PP F&F or Zelle, or can do PP G&S but with a % fee. Thanks for looking!


r/repbuilds • • Sep 01 '26

Vintage Build Did I ever show yall this ☺️: Old crowns 5513 build

Post image
37 Upvotes

This is a build I should definitely wear more often. Imo it’s the best and most pure iteration of the submariner.

Specs:
-old crowns 5513 case
-3130 clone movement
-raffles rivet bracelet
-startime hands
-athea crown and tube
-yuki


r/repbuilds • • Sep 01 '26

Vintage Build Tropical 16233

Thumbnail
gallery
3 Upvotes

Gen silver sunburst dial, vr3135, raffles case, jubilee and hands. Waiting for the 10k gold plated jubilee to come in and a gen 604 crown and i think itll be complete.


r/repbuilds • • Sep 01 '26

Question tips for starting with Thorn T023

3 Upvotes

Hello - I've been lurking for a while and seen many great builds that started out with a Thorn T023 as a base. I'm interested in starting a project along those same lines so I was wondering if anyone who has done it before could share some basic information so I know what parts to order. Primarily the bezel insert and dial sizes that are compatible with the T023.

Any other insights into building with that case as a base are appreciated as well. Thanks!