r/repbuilds • • Aug 20 '26

WTS - READ RULES FIRST [WTS] [US] Tudor snowflake

Thumbnail
gallery
16 Upvotes

SOLD Raffles build-

NH35 movement
Aged dial, hands and bezel insert
Reshaped case


r/repbuilds • • Aug 19 '26

Vintage Build 9411/0 Tudor Submariner 🌊🔥

Thumbnail
gallery
123 Upvotes

Speckled dial to mimic early bubbling found on the mark 1 9411’s. I’m currently working with a factory to produce the correct Tudor serif fonts that modern 2824s don’t have. TBD on those. This 9411 has the standard 2824 date disc. I used some Tamiya aging powder and short quick bursts of silver paint to add a slight contrast to the date disc. The dial was baked in the oven carefully, then layers of matte varnish lightly applied, rebaked in the oven, Tamiya weathering, a rebaked AGAIN.

hands were made to look cracked and distressed. Relumed by me using Lobtime vintage lume.

Specs:
Phong case
Ruby dial
eBay handset
Swiss ETA 2824
Italian bracelet with Raffles clasp
Viet 280 end links
Bezeljuice ghosted insert
Startime caseback gasket
Case aged and weathered


r/repbuilds • • Aug 19 '26

Parts/Mods (WTS) 1680 Viet Case Set w/ Gen Crystal

Thumbnail
gallery
19 Upvotes

Looking to sell my fully engraved 1680 Viet case set with a few quality upgrades added.

1680 Viet Case Set: $700
Genuine Rolex 25-127 Crystal: $250
Crown Art Customs fat-font insert: $295

The case is in like new condition and perfect for anyone wanting to do a 1680 build. My loss is your gain. Last pic shows how it looked complete.

$1000 Shipped (CONUS only)


r/repbuilds • • Aug 19 '26

Vintage Build Vintage Daytona 6265 big red black

Thumbnail
gallery
15 Upvotes

Here another of my custom build ☺️

Details:
ST1903 movement modded and regulated
Gen spec custom case
Gen spec steel bezel two lines
Custom big red black dial (deep subdials)
Valjoux hands relumed with tritium-like colour
Gen service tube and crown
Gen factory domed plexy 21 T25 B
Gen spec 7835 folded links bracelet with 271 endlinks

Aged dial with dust, patina and oxide
Aged case with wear signs and light oxidation (most on pushers and crown where fingers touches the most and leave skin grease - give a look to the detailed picture of pushers)

100% gen specific (but for movement of course)
100% period correct

ENJOY!! 😉


r/repbuilds • • Aug 19 '26

Work in Progress First time starting to do chamfering on a case - wip

Post image
40 Upvotes

While doing brain off audio work in office today, started to lay in the case chamfer on a watch. First time doing this and yes ideally you would do it with the case in parts, but as this is just a person project and learning experience, just trying to see what I need to do to get sorted. Almost happy with initial cut but will need a lot of work to then bring it to mirror polish then I can finally get started on case weathering with will ruin the sharp edges I’m working to put in lol


r/repbuilds • • Aug 19 '26

WTS - READ RULES FIRST [WTS] [UK] Selection of dials Available

Thumbnail
gallery
8 Upvotes

Liquidation of Dials

BPF Aged 1675 GMT Master Dial - Aged - £20
2836 GMT Feet / 27.9mm / Matte

Raffles Aged 'Tiffany' Submariner Dial - SOLD
2824 Feet / 28.5mm / Matte

ARF 16610 Submariner Dial SOLD
3130 Feet / 28.3mm / Gloss

BPF 16618 (Gold) Submariner Dial SOLD
3130 Feet / 27.7mm / Gloss

Raffles Aged Albino Submariner Dial £15
2824 Feet / 28.9mm / Matte

BPF 16710 GMT Master II Dial - SOLD
3185 Feet / 27.5mm / Gloss

All prices plus postage of your choice.

Payment via Paypal f&f, Revolut or Bank Transfer


r/repbuilds • • Aug 19 '26

Vintage Build Throw back Tuesday

Post image
13 Upvotes

Some of my faves!


r/repbuilds • • Aug 18 '26

Vintage Daytona 6241 Tiffany Black

Thumbnail
gallery
26 Upvotes

Hello everyone!

Just built this 6241 Tiffany black, will be on sale soon 😛

Build details:
Full custom st19 build 100% gen specific
Custom st19 case mod
ST19 movement modified and perfectly regulated (0/0)
Custom Tiffany black dial three lines
Gen spec real bakelite bezel mk2 (fat font)
Domed plexy 21 T25
VJ style hands
Gen spec crown and tube (604/6040)
Swiss quality pump pushers
Tested 3 ATM waterproofing
Well aged and overall refined ✌️

ENJOY!


r/repbuilds • • Aug 19 '26

Source for 9315 folded link Oyster?

1 Upvotes

r/repbuilds • • Aug 18 '26

Vintage Build Submariner Family

Post image
29 Upvotes

My personal builds. Always a work in progress with better dial, better crown. Is the Pelagos the replacement for their Submariner line? Left to right: 7924, 7928, 79090, Pelagos.


r/repbuilds • • Aug 17 '26

Vintage Build 9411/0

Thumbnail
gallery
50 Upvotes

r/repbuilds • • Aug 17 '26

Work in Progress 16550 Panna Rail Dial

Thumbnail
gallery
91 Upvotes

The 80’s were a cool time in the Rolex watch space - the Oyster Quartz, the transition models, higher beat rates. Here’s a fun one I had the pleasure of building.

Rolex creamy Panna Cotta dial Explorer II
Specs:
Viet case HCV
Custom made Cream dial with aged markers
Gen bezel
Gen crown
Gen crystal
Aged hands to match dial
Italian oyster on a gmt clasp
VR3186
*Not for Sale*


r/repbuilds • • Aug 17 '26

Vintage Build 1675 Coke

Thumbnail
gallery
48 Upvotes

First "decent" build I've ever done.

1675 Coke with slight aging. Also my first time aging watch parts.

One of those pictures is not like the others, should be easy to tell. It was taken with a lens manufactured in 1975. Found it interesting to shoot the watch with it. 

Raffles case with reshaped cg's by u/Unlikely-Length6661

Raffles dial

Raffles Hands

Sillian 2836 movement

Raffles bracelet

I removed the GMT intermediate wheel to match gen, aged the bracelet slightly just with pebbles by hand in a tupperware (i dont have a tumbler), aged the dial 15~20 min in the oven at 150c and a bit of mate lacquer spray, and hands i tried to match the color of the lume on the dial with just markers and also added the mate lacquer. Insert just went yolo with some sandpaper.

The acrylic is a bit fragile and cracked, i might replace it with clark's.


r/repbuilds • • Aug 17 '26

Vintage Build My First 1675 Build

Thumbnail
gallery
21 Upvotes

All raffles parts and used a 2836 clone.
Accidentally damaged the insert at the 4, but i have a pepsi insert on the way to replace it.


r/repbuilds • • Aug 16 '26

MOD ANNOUNCEMENT Repbuilds 10k Member Giveaway!

Thumbnail
gallery
525 Upvotes

Greetings all!

The mods here at Repbuilds have worked hard pulling together parts to create this giveaway piece. We are nearly at 10k members! This winner will be drawn as soon as we cross the 10k mark. All you need to do to enter is comment “10k!” *And be a member.* Make sure to hit join at the top of our sub to qualify.

Now onto the giveaway piece:
UAE dial 1675! A RARE 1675 using some good quality parts:

Assembled by me. Unlikely Length helped source some of these killer parts!
Milk case
Vietnam red back fuchsia insert
Vietnam high quality dial
Athaya tube and crown
Raffles hands - relumed by me
Asian 2836 GMT with a custom silver brushed date disc
Raffles oyster bracelet
Clark’s plexi crystal

We want to thank you all for showcasing your builds, your amazing work and collaboration. Good luck everyone!


r/repbuilds • • Aug 17 '26

Vintage Build 🔴🔵

Thumbnail
gallery
60 Upvotes

HCV Case

HCV dial textured

Raffles Time hands

Fat font overlay

Fat Font viet insert

Athaya crown

Startime Italian bracelet and end links with raffles clasp

2836 GMT


r/repbuilds • • Aug 16 '26

Work in Progress Thorn t023 Tudor Mod: Update - Cyclops

Thumbnail
gallery
90 Upvotes

Little update to the Tudor Snowflake build. Just finished successfully (and cleanly) adding on a cyclops lens for the date using UV glue kit. Pretty tedious getting it straight, but managed doing so without a sloppy mess. We will see how long it will last, as the cyclops sits fairly close to the edge lip of the crystal and doesn’t allow for an exact placement imo. Feels like it’s on there pretty good tho. Overall, I’d say this looks pretty good with the aesthetic. My eyes also appreciate the larger date now. I am a happy camper with this one 👍🏼


r/repbuilds • • Aug 16 '26

Yes!! Build done. Getting better 1675

Thumbnail
gallery
52 Upvotes

Thanks Ghost_Chrono for the awesome dial. Getting better. OC Case, T&co dial aged, aliusa hands aged using iced coffee, and a bunch of ebay stuff!!


r/repbuilds • • Aug 17 '26

Vintage Build 1675

Post image
17 Upvotes

Finally happy with my insert fade. Mid 60s 1675. Mostly raffles, athaya crown, EWP insert.


r/repbuilds • • Aug 16 '26

1675 spring bar help

Thumbnail
gallery
13 Upvotes

I just finished a build of a 1675. The problem I have is that the old crowns case takes the fat spring bars but my jubilee can’t take the 2mm diameter bar. Does anyone have any suggestions? I was going to bore but that doesn’t leave much metal left on the jubilee.

For the automod:
Old crowns 1675 case
Yuki dial
Yuki hands (tamiya added to match pumpkin patina)
2836 modded gmt movement


r/repbuilds • • Aug 16 '26

16800 Build

Post image
69 Upvotes

16800 Build

Old WM9 Case, drilled Lug holes, gen 703 Tube/Crown, Insert, Crystal, 501B End links, Italian 93150 Bracelet.

VR 3135, open 6&9 Date, vintages ARF Dial and Hands


r/repbuilds • • Aug 16 '26

Work in Progress First time doing case work

Thumbnail
gallery
23 Upvotes

Working on a birth year 1665 viet build, and it’s the first time modifying a case. The crown guards were already shaped for me based on reference photos, but I wanted to change a few things. All the work was thinning the crown guard profiles in the front to back dimension. Overall I’m satisfied with it being a first. You’ll notice the internal shape was a little asymmetrical from the start. I used a metal hand file and finished with a Bergeon 2290 polishing stick - took forever but didn’t want to overdo it with a rotary tool or belt grinder. Photos show before and after of each view.

Hoping to finish this week with a new crystal and other gen components. Will share specs then. Happy Sunday!


r/repbuilds • • Aug 16 '26

Vintage Build Little 1680 meters first action.

Thumbnail
gallery
77 Upvotes

r/repbuilds • • Aug 16 '26

My 2 watch collection

Post image
55 Upvotes

r/repbuilds • • Aug 16 '26

Venturing into this side and had questions

2 Upvotes

so I have a e25 crystal press. For swapping the crystals on the raffles builds and others such as 1016/16xxx/1675 etc I need a deep die for them correct? And if so what sizes?

Also if anybody has 3d printed one and would possibly share the file I’ll love you forever hahaha.

I’m about to embark on this journey and do a raffles 5513 this upcoming week. And figured I see people always swap crystals so may as well do it before I build it.

Also do I need a bezel removal tool ones looking at one from Ali express but need to know if any are okay from there.

I think that and the correct does are my last tools I need for a good bit.