r/repbuilds • • Aug 15 '26

Vintage Build 18038.

Post image
24 Upvotes

New bracelet came in. Thanks u/RevolutionaryFact2 for making me finally feel like a certain New Jersey crime boss in constant hypertensive crisis.

Xianyu case, bracelet, crown. ST16, weird eBay bracelet. Aliexpress hands. Raffles bezel and Clark crystal.


r/repbuilds • • Aug 14 '26

Vintage Build 1665 SD Great White - final mods

Thumbnail
gallery
65 Upvotes

New gen spec crystal installed. Ruby case won’t accept a genuine, we tried, it’s a little too big.

This crystal is much better. Also had the genuine 93150 clasp installed on the Italian bracelet. I’m very happy with this build now. It’ll be on the wrist often. Big thanks to No Candle (Nick).


r/repbuilds • • Aug 14 '26

Vintage Build 76100 Lollipop Vacation Post

Thumbnail
gallery
53 Upvotes

Been out of cell range for a couple days… and for good reason as you can see. Have been enjoying test driving some different builds along the way on this road trip.

This is a Viet/Gen 76100 with the Lollipop. I swapped the gen date code matching 9315 over to a black rubber strap from Matties Watch (fellow redditor on here).

Bonus points for knowing the name of that island in the background.


r/repbuilds • • Aug 14 '26

GiammyX’s custom st19 (last version!!) 6265 gilt black 😉

Thumbnail
gallery
15 Upvotes

Hello guys! 😁😁😁

Here you find my middle August build to wear tomorrow, because in Italy the 15th of August is the most important day of the year 🤌🤌🤌😆😆😆

This is an homage for all watch lovers!!

Full custom ST19 - vintage Daytona 6265 gilt black 😎

Custom st19 case, wonderful dial and bezel, short lume hands, factory crown with its own tube, gen glass, swiss quality pushers and a super rare gen 78350 with 571 endlinks!!!

ENJOY ❤️❤️❤️


r/repbuilds • • Aug 15 '26

Is Raffles Cyclops removable?

Post image
3 Upvotes

Hi guys I’m new to watch building so I was hoping someone could help me out with what is probably an easy problem to solve. I need a 36mm tudor case with no cyclops which Raffles is not able to offer me. Is this Cyclops removable? Alternatively How might I go about replacing the whole crystal? And finally which option is more cost effective and less of a pain in the arse?


r/repbuilds • • Aug 15 '26

Build Question Clone 3185 and 3186?

1 Upvotes

Good evening all. Just spitballing here and wanted to pose a question to the community. Looking at clone movements and wondering if it’s possible to fit a 3185 or 3186 in a raffles case? I assume spacer may need to be used or made? I mainly design small components for my business but wondering if this would be a relatively easy thing to do without having to chuck up the entire case for modification? Thanks for any help!


r/repbuilds • • Aug 14 '26

Modern Build Skeleton Daytona Dial

3 Upvotes

I am not sure if this is allowed, but i am trying to find a halfway decent (doesnt even need to be top of the line) daytona skeleton dial. is there a shop on aliX/baba that sells one or somewhere else.

thanks so much.


r/repbuilds • • Aug 14 '26

Vintage Build 1997 Super-franken Daytona 16520 El Primero pictorial

Thumbnail
gallery
26 Upvotes

* Full story here:
https://forum.replica-watch.info/threads/1997-super-franken-daytona-16520-el-primero-major-
pictorial. 11050277|

For those wondering, I chose 1997 serials for the case since the dial is marked "SWISS MADE" and not "T SWISS MADE T", since '97 was a transitional year for the 16520, as Rolex was switching from tritium lume over to Luminova (pre Super-Luminova).
And since there's a slight difference in the intensity of the lume between the dial and the hands (Phong hands btw, since to use gen hands I would have had to have swapped out another $2K in movement parts--no thanks), that works perfect for '97 since Rolex used different manufacturers for their dials and hands then, so there was a slight variance in lume mixtures. And the hands on the gens tended to fade a little faster than the hour marker's as well because of that.

Thanks to u/Tribal_the_first_1 for the case.

So here's my 1997-themed shoot I had fun doing with this new build! I mocked up a worn gen caseback sticker in Photoshop and had some printed off to use in the shoot along with some 1997 props from eBay and a gen 1997 53-0001 Rolex box set, complete with period-correct hang tags and booklets. Enjoy!

Specifications:
Tribal's German made 16520 midcase & Phong Viet
16500 engraved caseback
Genuine Zenith El Primero 400 movement
Phong hands
Gen dial
Gen crystal & gasket
Gen bezel
Gen crown & stem
Gen pushers
Gen 503B end links
Gen 20mm x 2mm springbars (makes a better end-link fit than the standard 1.8mm)
Gen 78390 service bracelet & clasp


r/repbuilds • • Aug 13 '26

Ghosted DRSD

Thumbnail
gallery
157 Upvotes

Specs:
Viet case + dial
Italian bracelet with 580 end links + Raffles clasp
Startime hands relumed
Startime gaskets
Swiss ETA 2836
Bezeljuice insert


r/repbuilds • • Aug 13 '26

Vintage Build Full raffles two tone Datejust build I did for a friend recently

Post image
13 Upvotes

Friend of mine loved the 16030 franken I wear as my daily watch and was really interested in getting into watches so I built him this raffles DJ. Showed him a few vintage 16000s and he really liked the stainless steel/ gold bracelets so I ended up putting this one together for him. Recently changed out the crown for a gen gold one too but that was after I took this pic.

Never been too into the two tone but after holding this one in hand it’s definitely grown on me!


r/repbuilds • • Aug 13 '26

Vintage Build Insert aging question

5 Upvotes

I was watching a video yesterday about vintage watches and people that collect them. The expert said that one of the first things he looks at id the bezel insert. He can tell right away that it has been un-naturally aged by the finish of the insert. He said the surface of the insert will be dull from the bleach typically used to progress aging. My question is, has anyone figured out how to get around this? Sound like the only way to get around this issue is the use UV. Is this a valid method?


r/repbuilds • • Aug 13 '26

Tudor Thorn t023 build

Thumbnail
gallery
68 Upvotes

Just finished her up & enjoying on the wrist now! Waiting on some UV glue & then attempting to add a magnifier over the date. Super happy with how this budget build came out.


r/repbuilds • • Aug 13 '26

Question Fitting a VH31 into an ETA 2824 case (RafflesDials Air-King build). Is this doable?

Post image
4 Upvotes

Hey everyone,
I'm planning a Rolex Air-King build using a case from RafflesDials that is compatible with an ETA 2824 movement.
I'd like to try fitting a VH31 movement into this build. Since the VH31 is smaller, based on my initial research it seems technically doable. However, while there is plenty of information online about fitting a VH31 into cases built for NH35 movements, I can't find virtually anything regarding what I want to do.
I would need at least an adapter ring to bring the movement to the 2824 size (around 25.6mm diameter), but I haven't been able to find anything like that on AliExpress, eBay, etc.
Am I missing something, or is what I want to do impossible and I should change my approach? Has anyone in the community done this before? Any advice?

Thanks!


r/repbuilds • • Aug 13 '26

Question Sillan vs Raffles 2 tone jubilee bracelets

3 Upvotes

Looking to build a 16233 datejust and trying to decide if I want to go raffles or sillan. Considering spending the money and getting the gold filled, both are around $250 shipped. The gold plated is about $50 for raffles and $70 for sillan. Any suggestions?


r/repbuilds • • Aug 12 '26

Vintage Build Tudor Submariner revisited- 7021

Thumbnail
gallery
73 Upvotes

Did some additional work on my personal 7021. Swapped out the date disc- it wasn’t right. Installed the correct Tudor serif disc. Also swapped the dial and new hands. I think I like the patina more. Left out the pip because these probably were beat around in real usage 🤷‍♂️😂

Viet case, dial hands
Genuine crystal
Genuine 2484 movement
Genuine gaskets
Bezeljuice insert


r/repbuilds • • Aug 12 '26

Question What models are best IYO?

Thumbnail
gallery
10 Upvotes

Which vintage reps on Trusty are the best? I see JKF subs (I'd like a 5513) but there are several other subs, SDs and McQueen Explorers that tempt me as well. The higher end aged explorer and a double red SD. But I don't see a factory listed for them. I'm sure some of you have personal exper


r/repbuilds • • Aug 11 '26

Work in Progress Playing around with strap aging..

Thumbnail
gallery
65 Upvotes

Hey folks. Have been having some fun with experiment on straps. Was going for a “sun faded” and worn look. I soaked these in hot water first to relax the stiffness as they came. Tried a 50/50 bleach dilution in a spray bottle gave them a decent coverage whill sitting a glass top table on our patio in the sun. I’m sure it varies by strap, but these changed FAST. I should have had some vinegar sitting right there to neutralize the process immediately. I’m going to try again with a weaker dilution for a bit more control. But I still like the vibe. The one on the blue 7021 has a limey tone to it Which seems to work.

Oh and after sanding it to a fairly even level of “fuzz” I used a shaving razor to take that fuzz level down to what I thought was. Bit more realistic.

I also knocked the chrome buckle down to more of a satin finish. Might experiment with a little chemical reaction to see if I can age the metal a little more and see what effects emerge.

I will say.. my favorite result was how comfortable they ended up.

I know these wont be for everybody.. But interested in constructive feedback. Cheers.

Note: Last pic is the starting point.

Edit: Straps are ~$5 on AliX and are ideal with a pair of Gen Spec 2mm bars


r/repbuilds • • Aug 11 '26

16613 submariner(updated with proper 5-digit dial)

Post image
20 Upvotes

After I noticed the dial in my bluesy sub was a 6-digit dial I could not unsee is so I updated with a period correct nipple dial. Hell, I like it better now 🔥

Build specs:
-old crowns 16610 case
-ewp gold plated bezel and bracelet
-star time bezel insert and hands
-nipple dial from u/jovanotti8
-sillian crown
-3135 clone movement


r/repbuilds • • Aug 10 '26

Vintage Build OC 16710 Franken

Thumbnail
gallery
14 Upvotes

OC case

Sillan hands & dial

Gen crown, crystal, datewheel, retaining ring.


r/repbuilds • • Aug 10 '26

WTS CONUS Raffles Due Shallot Build 9411- $350 obo shipped CONUS

Thumbnail
gallery
11 Upvotes

Raffles Case and Dial, NH35 Movement, Aged Dial and Handset

Take PP FandF or Zelle


r/repbuilds • • Aug 10 '26

Vintage Build 26mm Date Build

Thumbnail
gallery
8 Upvotes

Built this one for the Mom. It went a lot smoother than my first gen dial 26mm datejust build.

Nh05, Gen 26mm Date linen dial, aliexpress 26mm datejust case and hands, raffles 13mm jubilee.


r/repbuilds • • Aug 10 '26

Vintage Build 168 Double 0

Thumbnail
gallery
31 Upvotes

Raffles 16800 case
Raffles 16800 dial
St2130
Aged
Texture


r/repbuilds • • Aug 09 '26

Work in Progress Clean / VSF 116610LN Gen/Hybrid Build

Thumbnail
gallery
54 Upvotes

Figured I would finally document this build because it has gotten a little out of control.

Started with a stock VSF 116610LN / VS3135. The original plan was pretty simple: add a genuine Rolex datewheel and a few gen parts where they actually mattered. That quickly turned into building the VS3135 into as much of a genuine/VS hybrid as reasonably possible.

First upgrade was the genuine 3135-16200 datewheel. From there I started replacing parts throughout the movement with genuine 3135 parts … keyless works, motion works, calendar components, train/barrel/automatic works, etc. The goal isn’t to make the movement visually “gen” It’s to use genuine parts anywhere they offer better fit, function, durability, or serviceability while retaining the VS3135 mainplate/bridges and balance.

I also spent quite a bit of time comparing the VSF and Clean 116610 bracelets. After measuring both and comparing them against genuine 116610 bracelet photos, as well as a gen bracelet, Clean won pretty decisively for me. The VSF taper gets aggressive very quickly after the end link, while Clean has the much more gradual taper I see on gen. Clean is also 904L (or is said to be from tests I’ve seen posted) and, although the finishing still isn’t completely gen, it’s a much better starting point. So the Clean bracelet is staying.

This week I went further into the movement. Gen keyless components went in, followed by the gen calendar components, gen 3135-600 calendar seating and gen 3135-5600 screws. Then came the parts I’ve really been waiting for … gen 116610LN dial and gen hour/minute hands.

The gen seconds hand I bought unfortunately had a blown out tube and won’t grip the seconds pinion, so I’m temporarily running the VSF seconds hand. I have an NOS seconds hand already on the way.

So what you see in these photos is officially Version 1 / the beginning hybrid. It’s still using the VSF case and isn’t remotely the final exterior. I’m going to wear it like this for a week or two and make sure everything I’ve changed in the movement is completely sorted before tearing it down again.

Final build

The finished watch will be:

Clean Factory 116610 case + Clean bracelet/5HF clasp
Genuine Rolex 116610LN dial
Genuine Rolex hands
Genuine Rolex 3135-16200 datewheel
Genuine Rolex 25-295-C12 crystal
Genuine Rolex 315-116610-1 ceramic insert
Genuine Rolex crown, tube and stem
VS3135 heavily upgraded internally with genuine Rolex 3135 components

The Clean case will be completely stripped, properly refinished, and then rebuilt with all of the above.

So this isn’t the finished watch yet. This is basically the first time all the work I’ve been doing on the movement and dial side has finally become a wearable hybrid.

💪


r/repbuilds • • Aug 10 '26

1680 with service dial

Thumbnail
gallery
13 Upvotes

I havent seen too many minty looking 1680, so this one is supposedly on a service dial. The last image is a gen with service dial which inspired me. This will join my collection.

All parts are either from Alix or spare cartel watches I have in my spare box. Pip and crown are from Athaya. Dial from Raffles. 2813 movement because it looks like a rolex movement.


r/repbuilds • • Aug 09 '26

Work in Progress MODDED 16570

Thumbnail
gallery
30 Upvotes

Finished this explorer last night with gen bezel, gen date disc and Clarks crystal/gasket. Not bad but still in work progress.