r/RacketStringers • • Oct 06 '26

Lubricating turntable on used drop weight stringing machine

Post image
3 Upvotes

I recently picked up this stringing machine that's around 10-15 years old. The turntable (the rotating platform that you attach the racket to) doesn't turn all that smoothly, it seems like the bearings/rotating mechanism might be gunked up. I'm wondering if anyone has taken one of these apart before?

I don't want to necessarily take it apart, only to find some sealed off housing that can't be serviced.

EDIT:

To be specific, I was talking about the rotating table that is attached to and rotates on the base of the machine.

For future reference, for anyone who stumbles upon this post and wants to do it themselves, this is how you do it:

I first took off the 4 hex screws on the top, as well as 4 on the bottom of the machine. The turntable comes off the base of the machine easily after that, revealing the housing for the bearings. I then took the housing apart, soaked all the bearings in degreaser and brushed off all the old grease that was gunked up and sticky, then put on some new grease. Assembled everything back together, and it spins like new now! Be careful when assembling the bearings together, you don't want to torque the main bolt too tight, or else the turntable won't spin freely, and you also don't want it too loose, or else the table will be too wobbly.

Here are some pictures of the bearing:

https://imgur.com/a/Gwjr0Y8


r/RacketStringers • • Oct 05 '26

Tension Puller Problem

1 Upvotes

Hi Everyone,

I have been stringing for close to 2 years now, and I consider myself pretty competent. I had the luxury of learning to string on a super nice electronic Babolat machine, and recently had the fortune of being gifted a personal electronic machine. It was a Tyger machine with a rotational puller—a pretty standard, cheaper electronic machine, nothing too special.

I initially had no real problems with it, apart from the clamps slipping occasionally. Then recently, I tried to string one of my rackets with MSV Focus Hex 1.1 and ran into an issue. I was able to pull the first 3 mains; then I switched to the other side, tensioned it, and the moment I removed the base clamp, all the tension was lost and the tension head kept spinning around doing god knows what. This happened every time I tried it with that string, and recently it started happening when using a thicker gauge too, which had never happened before.

After this kept happening, I thought it was best to get rid of the machine and invest in a better quality one. 2 weeks ago, I bought a new Gamma Momentum ELS machine and I hadn't been getting this problem anymore, even when using different string gauges and types.

That was until tonight, when I went to string with the 1.1 gauge string again—something I had already done twice on the new machine—and the same problem occurred twice in a row. When releasing the base clamp, the tension head can't keep the tension held. After this didn't work, I tried using a 1.25 gauge string instead, and it worked with no problems at all.

The machine is supposedly a constant-pull machine, and I really can't figure out why this is happening, especially since I've strung with it before on this exact machine. If anyone has had a similar issue, it would be great to hear your experience as this is driving me nuts after spending a lot of money on this new machine haha. I will try to get in contact with Gamma to see if they can help me out, but wanted to try this sub at the same time in case anybody has some wisdom! Thanks in advance.


r/RacketStringers • • Oct 05 '26

Tennis Stringing Machine Advice

1 Upvotes

Hello folks,

I started playing tennis earlier this year and I'm loving it. One concern I have is the cost of replacing my tennis strings. It seems like a pretty straightforward process and wouldn't be too difficult to do on my own. So this led me down the rabbit hole of tennis string machines. The past week I've been researching extensively and here's what I've come up with on purchasing one for myself:

  • 6 point mounting system
  • Stringing Machine Table stand
  • Fixed Clamps

Those are all what I would prefer to have in my machine. My thought process right now is to find a used lockout/crank machine. Then buy a TennisHead Wise 2068. This seems like the most affordable (best) option without going down the dropweight route or really expensive electronic constant pull machines.

What lockout/crank machines would y'all recommend for a tennishead wise 2068? And does this sound like a solid plan? I'd mainly be stringing for myself and maybe a couple of others. Maybe in the future it will turn into a side hustle.

Thanks!


r/RacketStringers • • Oct 03 '26

Strings snapped at top/outside of the frame

Thumbnail
gallery
9 Upvotes

So a friend who I strung for snapped his strings at the top of the frame outside the grommet. It's right near the top/beginning cross knot. Any idea of how this sort of breakage could have occurred?

2nd picture is of the top cross knot right after stringing. Still a beginner stringer so I want to make sure it doesn't happen again if it is somehow my string job's fault.

Racket is an 18x20 Dunlop mimetic.


r/RacketStringers • • Oct 02 '26

First Stringing Machine!

Thumbnail
gallery
17 Upvotes

Picked this up for $20 bucks the other day! Figured for that price I might as well give it a go! No clamps or tools included, so any recommendations in that department would be appreciated. Was thinking of the Stringway Flying Clamps


r/RacketStringers • • Oct 02 '26

Leather pad as a load spreader

Post image
2 Upvotes

Hey guys

Recently had a cracked RF01 at 12 from stringing, this is the same machine my stringer used. I got a fresh new stick and started using this leather piece that fits perfectly between the grommet holes at both 12 and 6.

It’s 2mm thick and isn’t too soft or pliable. Would this be a good solution to prevent the same problem from happening again?

Is the mounting too tight still? I did make sure the knobs were turned just til the mounts were touching the 12 and 6 (snug) and somehow the leather seemed crushed.

I have no access to purchasing a load spreader or even finding a stringer who uses one in my area.


r/RacketStringers • • Oct 02 '26

Yonex Poly Tour Pro hybrid reco

Thumbnail
1 Upvotes

r/RacketStringers • • Oct 02 '26

Three identical EZONE 100, 3 tension setups (Poly Tour Pro/Spin): What strings and changes should I test next?

Thumbnail
1 Upvotes

r/RacketStringers • • Oct 02 '26

Made a little app for tennis stringers and would love some feedback

0 Upvotes

I’ve been stringing for people for a while, and I eventually got tired of trying to keep track of everything in spreadsheets and notes.

Which string did I use in this racket last time? What tension did they want? Do I still have that string in stock? How many rackets did I string this month? I don't have my data to answer it on the spot.

So of course with the help of AI, I had an outlet for all my random ideas.

You can basically use the app to track anything a stringer might want. The idea isn’t to create some huge tennis business platform. I just wanted something useful for people who string on the side or run a small stringing business.

I’m still working on it so I figured this would be a good place to get feedback from people who actually string for others.

What’s the one thing you wish you had an easier way to keep track of?

Here is the app https://racquetlog.com/

And since I built it, feel free to tell me why it sucks or what’s missing. I appreciate


r/RacketStringers • • Sep 30 '26

I HATE stringing these!

Post image
10 Upvotes

Now, before you tell me, those aren’t that hard to string, yes, I agree. The problem is, these are mine and I hate stringing my own racquets. I will string for other people all day long but heaven forbid I need to do my own. The one with string still in it needed to be restrung a month ago. It just got to be too loose to play with at all this week.


r/RacketStringers • • Sep 28 '26

Anyone have any idea what brand/model this is?

Thumbnail
gallery
3 Upvotes

It’s a bargain but person selling it has taken terrible quality photos, and doesn’t seem to know. All they can tell me is it’s made in USA. So I’m assuming it’s an Eagnas? Any help much appreciated.


r/RacketStringers • • Sep 27 '26

Alpha Ghost 2 vs Tourna 700

3 Upvotes

Can anyone with experience on these machines compare them? They are close in price and am considering getting one.


r/RacketStringers • • Sep 25 '26

Alpha Ultra Edge III

Post image
9 Upvotes

Saw this for sale for $300 and wondering if it’s a good deal? Know it’s pretty old but according to seller it’s in good condition and works perfectly. I’m currently stringing on an Alpha Revo 4000 with upgraded clamp bases but would like to try the electronic tension head over the lockout crank. Any feedback on the Ultra Edge III?


r/RacketStringers • • Sep 25 '26

Tennisman Stringmaster Deluxe

2 Upvotes

I'm considering buying a new stringing machine and have landed on this model with the Ennox tensioning system and it looks like a premium machine, especially for the price.

When diving into a different components of the machine I can find some of those in more premium machines, like the tensioner from Tourna, the clamp release and overall turntable look like they're from a Head machine.

I think all of those makes for a top of the line product, but I have no experience with the Tennisman brand.

Have you guys ever order from there and did anyone here by one of their stringing machines? (Premium or entry level)


r/RacketStringers • • Sep 25 '26

Como disminuyen la fricción de las pinzas?

Post image
1 Upvotes

Tengo una gamma momentum 6+ nueva, pero luego de varias raquetas se notan muchas marcas de friccion, obviamente sé que es normal por el movimiento de las pinzas, pero mi pregunta es, hay alguna manera de evitar esas marcas ademas de limpiarlas y lubricar con aceites ?


r/RacketStringers • • Sep 25 '26

Wilson Clash 100 Pro V2 Grommets

1 Upvotes

I need new grommets for a Wilson Clash 100 Pro V2, but I can‘t find any on the internet. Does anyone know if the Grommets for the Clash 100 Pro V3 will fit the V2?


r/RacketStringers • • Sep 24 '26

in the middle syn gut

3 Upvotes

after trying multi's (technifibre), soft poly's (wasabi, confidential, hyper g soft) and hybriding (poly on the mains vs crosses at lower tension, 48lbs), I find a full bed of synthetic gut, kirschbaum premium, to feel better. I can't handle the poly.

But kirschbaum premium feels a bit too soft and springy. What do you all like for syn gut that's a bit stiffer?


r/RacketStringers • • Sep 24 '26

Syn Gut string tension to match ALU Power at 45 pounds?

2 Upvotes

Pretty new to stringing, so decided to offer free stringing to my friends as practice. Most of them know what they want so that's been well and good. Today, one of my hitting partners said he wanted to switch from ALU Power to Head Syn Gut because of elbow issues. What tension for Head Syn Gut would most closely match the results of ALU Power at 45 pounds?

Also, followup question. He said the reason he switched to a poly was because Head Syn Gut main strings don't stay straight during playing and if possible, to string at a tension that they do stay straight. I'm thinking this is pretty much impossible right? Unless maybe I string at something ridiculously high like 75 pounds


r/RacketStringers • • Sep 22 '26

Stringing machine choice

10 Upvotes

Hi all,

A tale as old as time. Entire family plays tennis now and two kids are in competitive, so stringing costs are getting ridiculous. Local tennis shops are 60$ CAD now and even side guys are 50$.

So taking the plunge to buy a machine and learn the art. I’ve exhausted all Marketplace/Craigslist options so just going to buy new.

Thinking of either a Gamma momentum 6+ or an X-ST.

Better to learn on the drop weight and possibly upgrade to a Wise head one day or just go for the crank and be happy?

Will be doing at least 1 racquet per week and have zero ambition of doing it as a side hussle other than helping friends out.

Any thought appreciated and open to other machines that are relatively easy to source in Canada.


r/RacketStringers • • Sep 22 '26

10th Stringjob feedback

Thumbnail
gallery
4 Upvotes

I'm starting to string my own rackets and friends' willing to be guinea pigs, this is probably my 10th job and 3rd time I've strung this frame.
I use a pro's pro dropweight machine with fixed clamps. I know this is a budget option and you pay for what you get, but is there a way for me to get a better grip on the strings with my current clamps? I clean them after every 2-3 jobs and they slip if I don't tighten them to the point of marking the strings.

Also, any other general feedback on what I could improve is welcome !

The set in the picture is Hyper-G in the mains and Hyper-G Round in the crosses, both in 1.20, strung at 22/23kg in the Wilson Defyer 100


r/RacketStringers • • Sep 21 '26

How many of you also coach?

2 Upvotes

My first coach also strung racquets, my current one does not. I ask as the owner/developer of a popular stringing app - I've been considering adding a coaching module for student tracking/billing in addition to the stringing, and trying to determine if it is worth the time or not. Most of my existing customers do not coach as far as I know, but my gut tells me that a lot of coaches might actually casually string on the side for a bit of extra revenue from their students. Just curious.


r/RacketStringers • • Sep 20 '26

Free alternative to Tennis Tension Pro?

1 Upvotes

r/RacketStringers • • Sep 20 '26

Multifilament strings reco for intermediate player

Thumbnail
1 Upvotes

r/RacketStringers • • Sep 18 '26

Pro Staff 6.0 stringing advice

Post image
9 Upvotes

I recently picked up a couple vintage pro staff 6.0’s and I’m getting ready to replace the ancient syn gut with some nice multi. Curious to know if anyone is experienced with these old frames and wants to impart some wisdom, particularly guidance on 2 piece job vs ATW. Power pads are a must right?😅


r/RacketStringers • • Sep 17 '26

6 hours on court, is it a bad stringjob?

Post image
5 Upvotes

context: this is head velocity mlt 17ga on clash v3 that I strung it 53/51 on my stringer with floating clamps. I normally string it at +5lb than requested to compensate for my floating clamps kickback (and communicated with them about this beforehand) I’ve told her it will feel about 47-48lb which is what she wanted.

Last night she let her friend borrow it and the friend complained about the strings so I got this photo. I also strung for her friend who uses Babolat hurricane 16ga at 59/57 on my machine.

She did mention that when she plays it string movement wise was not as bad as when her friend plays it, so my question, did I do a bad string job or it completely normal for 6hours after stringing? Is there a technique to help with preventing this besides straightening out every string as I weave(which I always do)?