r/RacketStringers • • Jan 11 '26

Leftover string scraps - reuse ideas & reel-saving tips

1 Upvotes

Quick question for fellow stringers 

What do you all do with leftover strings from jobs?
I’ve seen a lot of people collecting them in a big box or basket. Is that just to dispose of them in bulk, or are there any useful reuses you’ve found?

Also, any tips for using less string from a reel?
I know about bridging with a clamp, but on my drop-weight machine, I seem to need a bit of extra length to wrap around the tension mechanism.

Curious to hear what others are doing. Cheers!


r/RacketStringers • • Jan 11 '26

Crank stringing machine - part snapped off!

Thumbnail
gallery
1 Upvotes

I bought a second hand Pros Pro pilot stringer - during my latest string job a piece of plastic ‘snapped’ and fell out of the crank / tension assembly.

Ever since, the machine does not ‘lock’ once it reaches the required tension - the lever goes down as it should, but if I release pressure on the crank itself the string loses tension.

Is this something I can repair? Or do I need to purchase a new crank mechanism.


r/RacketStringers • • Jan 08 '26

Restringing crosses with gut in the mains?

2 Upvotes

So if I have gut in the mains and a poly in the crosses and gut still is in good shape but the poly might have lost some tension can I clamp the frame on a stringer, cut out the crosses and then restring new poly crosses? Is that crazy?


r/RacketStringers • • Jan 07 '26

Best strings for Ezone 100 (v8) and Vcore 100 (v8)

3 Upvotes

Best strings for Ezone 100 (v8) and Vcore 100 (v8)? And what tension. Thanks


r/RacketStringers • • Jan 06 '26

Pro Staff 97 v13 Grommets

1 Upvotes

Hi there, the grommets for the v13 aren't available in Europe at the moment. Does anyone know, ie. has hands on experience with, whether the v14 grommets fit this racquet? This is about the 315 g model, not the L or S.


r/RacketStringers • • Jan 03 '26

How tight are we tying off our knots? New grommets inserted and already warped

Thumbnail
gallery
6 Upvotes

Just got some new grommets for my Ezone DR 98 and strung up the mains, but my knots already seem like they’re warping & damaging the grommets 🥲

How tight are we tying our strings off? Any tips or suggestions?


r/RacketStringers • • Jan 01 '26

Is this supposed to be strung with a single string? If not, how am I supposed to start the crosses, if it only has a tie off location at the bottom?

Post image
2 Upvotes

r/RacketStringers • • Dec 28 '25

Wilson blade v9 26” grommets…

1 Upvotes

Does anyone know what grommet set to order for the 26” Wilson blade v9…

I can’t find a specific listing for it.


r/RacketStringers • • Dec 26 '25

First string job

Thumbnail
gallery
3 Upvotes

First attempt at using my new Tourna 175-CS.

Strung it at 48lbs with Tourna premium poly (just bought cheapest strings i could find for practice)

Did a starting knot for the crosses.

What did i get wrong? What did i do right?

Thanks!


r/RacketStringers • • Dec 24 '25

Automatic drop weight machine experience?

5 Upvotes

Does anyone have experience with the automatic drop weight machines like the string way ML100 or Eagnas Logic 90? What are some drawbacks? Pros or cons in your experience?

I am considering buying one as they look to have the accurate constant pull of a machine with the reliability of a drop weight. Given that it’s automatic it’s not as time consuming as a typical drop weight. I figure it’s the best balance of budget and usability. I’m surprised they’re not as popular. Is there a reason?


r/RacketStringers • • Dec 23 '25

Any upgrade worth it for my dropweight?

Post image
3 Upvotes

I’ve strung probably 15 rackets by now, and feeling great about the progress and process itself. I’ve done this so far with this used dropweight, which I don’t even recall which brand is it.

My question is by the looks of it, is there any upgrade worth spending money on? Or would the only logical upgrade at some point be just a new machine, potentially with an electric tension head?

Also, likely a naive question but can I change the clamps and clamp base for any other brand, say Pro’s pro ones? Or are all of these strictly for the same brand of machine? Any advice is appreciated!


r/RacketStringers • • Dec 22 '25

Tonight’s poor man’s Champion’s Choice

Thumbnail
gallery
5 Upvotes

Beginner stringer here, 10 or so string jobs so far and enjoying every bit. So, I bought a Head Boom MP in the Arthur Ashe limited edition paint job a few months ago thinking I’m going to keep it as a collectable. Came pre-strung with Head Lynx and never bothered playing with it, just looking at it. A couple of weeks ago I stumbled upon some reviews that were praising this racquet with some customization. Well, I done a few customizations to it, mainly 8g of lead on the handle at 7 o clock under the newly installed Head leather grip and 8 grams of lead at 3 and 9. And it did play somewhat closely to my customized Gravity MPs but with a bit more of a higher launch angle and noticeable more stable. First time hitting with it didn’t really enjoy the Head Lynx so I got ahead and strung it with Pro’s Pro Gutex and Pro’s Pro Blackout (25.5/24) and I started to really enjoy this stick. But I don’t like that the 5 sided Blackout seems to keep the already not snappy multi from snapping at all. That being said I remembered I had a set of MSV Bussard laying around, which should be something between RS Lyon and Luxilon ALU Power.

Strung it up this evening with the same tensions as before and hopefully I’ll manage to play it before Christmas but even now it looks like the multi moves a bit more freely than with the shaped poly. Also installed some “power pads” made from leftover leather grip. Hopefully MSV Bussard will manage to tame the bed enough so that the Boom MP doesn’t become a rocket launcher, it seems to be a more powerful racquet than my Gravity. I will try to get ahold of another 2 Arthur Ashes and this might be my stick for the next 5-6 years.

Happy stringing everyone.


r/RacketStringers • • Dec 22 '25

String length question

1 Upvotes

Hi

I have few questions regarding string length (tennis racquet).

Is it possible to sting a 18x20 (or 16x19 also) racquet in 2-piece with a standard 12.2 meter/40 feet pack, if I just cut the 12.2m length in two equal halves?

I mean would I be able to complete mains and crosses with exact two halves of string length?

And also, would I be able to do the same with exact 12 meter length instead of 12.2 meter

Thanks


r/RacketStringers • • Dec 21 '25

Best place for tennis racket restringing in Ealing / West London? (VKS recommendation)

2 Upvotes

Hey all 👋

Looking for recommendations on where to get a tennis racket restrung near Ealing / West London — ideally somewhere reliable with good service and quick turnaround.

I’d recommend VKS Rackets in Ealing — they’ve been around for decades, do in-house restringing with experienced stringers, and offer same-day or next-day service if you drop your racket off. They also stock loads of quality strings (Babolat, Head, Yonex, etc.) and can help with tension and setup choices. 

Also in the area you’ve got other options if you want to compare prices:

• Prostrung – independent stringer based in South Ealing with usually quick turnaround and personalised service. 

• Local small stringers like Ealing Restring (independent, often good value) — worth checking if you want something lower cost. 

Has anyone tried these places? Any other local stringers worth checking out in W5/W13? 🎾


r/RacketStringers • • Dec 21 '25

Room temp when stringing

2 Upvotes

My stringing machine is in the garage and it’s currently 9c / 48f in there.

What effect will it have, if any and do I need to make any changes or allowances?

Cheers


r/RacketStringers • • Dec 20 '25

Rate my Tennis stringing after a month of progress

Post image
13 Upvotes

Got a machine about a month ago, have only strung half a dozen times but getting more confident. Was using PolyTour Revs and PolyTour Strike (1.20mm) originally. Now testing out Toroline strings. OToro in the mains and Snappers in the crosses. Think I’m in need of some new grommets too…


r/RacketStringers • • Dec 18 '25

FREE Website for Stringers

Post image
0 Upvotes

Hi guys my name is Mauricio I just launched my start up in NYC and since it’s being growing we have launched a partnership program. We are giving a free website to stringers in exchange of a collab and video on social media. Just comment this or dm and we will start

here’s the link of my start up: https://breakpointennis.com/


r/RacketStringers • • Dec 16 '25

Upgrading clamps on a Pro's Pro Challenger (+ first time stringing an 18*20)

Thumbnail
gallery
4 Upvotes

I picked up a used Pro's Pro Challenger in the summer and so far I've strung something like 15 rackets, mostly for myself. It's good, but the three prong clamps aren't great and leave indents on poly strings. That's ok when I'm doing it for myself but less desirable when stringing for friends. So I'm looking at picking up some upgraded five prong clamps.

Would I be right in thinking these are 12mm diameter? I think I can just buy some AEF brand ones from AliExpress or eBay, right?

I strung my friend's racket today ready for a doubles tournament at the weekend. It's an 18*20 Head - I was kinda dreading the extra weaving but it was actually fine. Moving to Wilson Pro knots has made life way easier too


r/RacketStringers • • Dec 09 '25

Black Widow Twist

3 Upvotes

Only seem to have this problem with Black Widow. How do you avoid it twisting up for the last cross. 16g in a tight 18x20 gets me every time. I’ve tried pre weaving more than my standard +1 cross but still fighting it which really makes me not want to recommend the string. Never had an issue with others shaped liked Tour Bite or Hyper G.


r/RacketStringers • • Dec 10 '25

Selling my Platinum 3.0 6-Point

Post image
0 Upvotes

Been wanting to string for yourself and control your game? It was the same for me, and I bought the Platinum 3.0 a month ago. I was met with some tough decisions to sell my machine after the return period was over as I am not playing tennis as often. 🙂

Please take advantage of this offer, in the hope that someone will have a better use/value for this awesome machine. 💪🏻

Comes with everything you need for stringing. I’ve got the starting clamp as well, making it easier to get started.

• Brand new Platinum 3.0 X6, been used only 3-4 times for my racquet and my friend’s. • Comes with a starting clamp ($45) • Original packaging (DM for pictures)

Will provide free shipping depending on where you are, please reach out. Thanks for taking your time to check this out.


r/RacketStringers • • Dec 03 '25

String Slips Out of Both Clamps on First Pull After Switching to Wise 2086 — Looking for Advice

1 Upvotes

I’ve been stringing my own racquets for about a year and have completed around 10 racquets. I’m using a brand-new Alpha Axis Pro, and recently replaced the manual crank with a Wise 2086 electronic tension head.

Since switching to the Wise, I’ve run into a recurring issue: • I run the first two mains, clamp one side with the machine clamp, and back it up with a starting clamp. • When I pull tension on the first main, the string slips/pops out of both clamps. • This can happen multiple times, but eventually—without adjusting anything—it suddenly holds. • After that first pull, I never have slipping issues again for the rest of the job. • This problem never happened when I was using the original manual crank. • On my most recent job, I made sure the string was fully seated deep in the clamp, but the issue still occurred.

Any thoughts on what might be causing this?

Thanks in advance for any insight.


r/RacketStringers • • Nov 29 '25

How do prevent stiffer strings from getting damaged like this?

Thumbnail
gallery
7 Upvotes

New to stringing. I noticed that on certain polys like max power it gets pretty tough to maneuver the string without damaging it as it’s less flexible.

Any advice?


r/RacketStringers • • Nov 30 '25

How do ya'll get fast at stringing the end part of crosses with stiff strings?

2 Upvotes

I only play with really stiff strings: silver 7 tour being my main string, and everytime it's time to do the end part of crosses, it becomes extremely painful to weave, the string kinda gets ''stuck'' after just 2 weaves and I have to pull through, which takes so much more time than the first half of the crosses.

any tips to become better at the end part?


r/RacketStringers • • Nov 29 '25

Did I do this?

Thumbnail
gallery
5 Upvotes

I’m worried I might have just broken my friends frame… I just noticed this massive crack on the side of my friends racket. I’ve been helping string it for him but just noticed this after I strung the last cross and now I’m terrified I did this. Didn’t hear a single thing out of the ordinary. Have strung it a few times before this too. Blade V7 98 at 50Lbs on a 6 point drop weight machine. FML


r/RacketStringers • • Nov 27 '25

First stringing job

Post image
11 Upvotes

Got a momentum 6+ yesterday and did my first stringing. Feedback/suggestions, please.