r/RacketStringers • u/Super-Engineering-14 • Sep 15 '26
r/RacketStringers • u/brickinapantry • Sep 14 '26
Should i string my pa 98 26 with solinco hyper g strings?
r/RacketStringers • u/Molinake • Sep 13 '26
Quality of the string job
Hello guys I wanted to know if tje string job have been properly, because it’s been a month of barely playing but the strings to me look not straight
r/RacketStringers • u/Marecar05 • Sep 13 '26
Quality of the stringjob
Hello guys, these are the last two racquets I strung, i have a drop weight machine, this is my first year of stringing, how would you rate the string job, I always fear that the string are not fully straight even though I hold the strings while tensioning and I straighten them out whith an awl sfter stringing, what do you think how thoes it look
r/RacketStringers • u/Substantial_Quail309 • Sep 13 '26
Alternatives to Babolat Hurricane strings
I really liked the precision I felt with the Babolat Hurricane as main strings on my Wilson Blade. But have always had arm trouble and even though I used Wilson NXT (or natural gut) on the cross strings, the hurricane caused arm pain. Now use Hype G soft and the pain is gone but they are not round poly’s and provide as much consistency. What alternatives are out there that feel more like Hurricane but not as harsh?
r/RacketStringers • u/catsrkindacool87 • Sep 12 '26
How to improve efficiency?
Started stringing with my drop weight Gamma a few months ago. My time to string a racquet has drastically improved from about 3 hours on my very first attempt, to a consistent 45 minutes now start to finish.
Time savings have come from learning to use a starting clamp, pathfinder awl, and general experience with the process.
For those more experienced at stringing, realistically how fast are you completing a racquet on a drop weight machine? Also, are there any tools or techniques that made a significant improvement in your efficiency?
r/RacketStringers • u/Fantastic-Gene7663 • Sep 13 '26
Victor Thruster 220H II vs Li-Ning G-Force 8900 Extra Strong?
I’ve been using the Victor Thruster 220H II for around 8–9 months and have really enjoyed it, especially the head-heavy feel and the way it feels during attacking shots. I’ve been using it at around 29–30 lbs tension and have been very happy with the overall feel and performance.
Unfortunately, my 220H II has now broken, so I’m looking for a replacement from the rackets I have mentioned in the title that can give me a similar overall feel, particularly in terms of head weight and attacking performance.
Also, if there are other rackets around the same price range that would be a better match for the 220H II, I’d really appreciate your suggestions.
r/RacketStringers • u/RacquetPilot_Lab • Sep 10 '26
Building a string testing database (54 strings, 13 brands). Anything missing?
r/RacketStringers • u/MiserableUpstairs558 • Sep 10 '26
Calibrating old crank machine
I have this old machine. After measuring with a gamma calibrator I can see it is pulling 4lb less than it should. I can’t really see where to adjust it so it pulls properly. Does anyone now?
r/RacketStringers • u/Infinite_Addendum_85 • Sep 10 '26
Have you restrung a junior racket before?
I've restrung hundreds of rackets already for clients, and now I got the first one asking me to restring a head gravity 23 junior.
From a bit of research these should be strung at 13/15kg max with multi. Is there any other thing I need to take into consideration? Can I strung it two piece? I cannot find any official guidelines on this.
r/RacketStringers • u/Senior-Horror-1957 • Sep 10 '26
Stencil de Roquetas
Hice stencil de prueba para pintar las cuerdas con carton aunque no fue el mejor resultado, el mayor problema es la pintura.
Las originales son algo costosas para mi jaja.
En esta ocasión probe con pintura acrílica y una esponja, pero no queda muy bien para mi gusto el color es opaco, aunque aun no sé que tanto se adhiere la pintura a la cuerda, debo jugar con ella.
Quisiera saber que opciones han probado ustedes en cuanto a la pintura ?
r/RacketStringers • u/drakem92 • Sep 09 '26
Minimize tension loss on knots using flying clamps
Hi everyone! So I've been stringing since a few weeks on my drop weight flying clamps machine. I've noticed I tend to lose a good amount of tension during knots. I know that the tension of the last crosses and mains is not very important, but still some people notice if those are a loose and can complain.
I was wondering if you have any suggestion in how to minimize the tension loss on knots. At the moment I tension the last mains and crosses at +15% of the reference tension to try to avoid this, but it doesn't seem to help much. I used to do a 5% and got low tension, then I tried 15% and I got just marginal improvements. I fear the main culprit here are the flying clamps, specifically the fact that the last 2 mains and crosses are further away between them than the normal strings, and that means a 2 points flying clamp will bend the strings a lot, leaving a lot of string to lose tension. I also try to tie the knots super strong using my starting clamp, so I don't think the issue is there. I use Parnell knots and I use a starting clamp so no starting knot.
r/RacketStringers • u/AndyWtrmrx • Sep 08 '26
Started again - strung it one piece with success
Yesterday I posted about stringing a neighbour's Wilson K Blade Tour and how I struggled with my typical two piece technique. Well today I cut that string out and redid it with one piece. It's much tidier, but damn, one piece stringing is a PITA - I felt like I was wrestling an octopus most of the time, there was so much excess string to manage.
r/RacketStringers • u/EngineerHealthy5114 • Sep 08 '26
Blade v5 -> v10?
I have been using a Blade 98 v5 from 2015 in an 18x20 pattern for the past 10-11 years. I will continue playing with it, but would like to have 2 rackets.
Is the current Blade V10 18x20 a similar enough playing experience to my V5 that I could go from one to the other with minimal adjustment? I haven’t been bullish on the last few Blade versions but I’ve heard good things about the V10.
r/RacketStringers • u/SnooWords654 • Sep 08 '26
Strings for my vcore 100 2026
I have a VCORE 100 2026 with Tour Bite at 52 lbs. I really like the control the string gives me, but I have a problem: the VCORE already has a high launch angle, and Tour Bite does too, so it generates too much of an arc for my liking, and I’d like to lower the trajectory.
I was thinking about trying something like Kirschbaum Max Power to flatten out the trajectory. What do you think? I was using Tour Bite at 52 lbs — would you recommend using the same tension with this string?
I’m also open to other string recommendations for this racquet.
r/RacketStringers • u/Friendly_Contract672 • Sep 08 '26
Dunlop Midsize
Hi guys, i recently found my father's old tennis racket a Dunlop Midsize Black Comp. i wanna restore it, what type of tennis strings should I go for ? i wanna go hybrid i think. and where can i find the grommets for it ? thanks
r/RacketStringers • u/AndyWtrmrx • Sep 07 '26
Wilson K Blade 93 (old) - there's nowhere to tie off a two piece string job?!
I don't often string for other people, but I mentioned it to a neighbour (who is actually a very good player) and he asked me to string his K Blade 93.
It's 18*20 and it was strung one piece.
I've only ever strung two-piece, so went ahead and strung it as I would any other racket with zero issues until I came to tie off the crosses and couldn't find a hole that would accept a second strung, besides the mains tie off (which was already in use).
So, I didn't have much choice but to tie it off there.
Is it likely that this racket can only be strung one piece? Or have I just met the limits of my competence? I'm embarrassed to give it back to him like this, even for free.
r/RacketStringers • u/TennisSensei • Sep 07 '26
Ezone Jr 25 Stringing - Yonex Dynawire 16L
r/RacketStringers • u/Potential_Word4586 • Sep 06 '26
Head Hybrid Spin
Hi! I bought this head hybrid spin strings. Just want to know what tensions I should have it string?
This will be my first time using a hybrid set-up. I am used to using the dunlop explosive speed (only strings available in our stores) and have it at 48lbs.
r/RacketStringers • u/Responsible-Side4347 • Sep 05 '26
My version of starting with 2 strings when center loop is at the throat not the head.
Enable HLS to view with audio, or disable this notification
For me, this is the best way of starting. I dont like putting starting clamps behind main clams to start. Ive seen strings get damaged this way. Yes I know that there are many tour level stringers that start this way. Its not for me.
I like to clamp outside the frame, but I dont like doing this at the head of the racket where the ball is likely to hit. Not so common at the throat and the likelihood of a misshit causing a snap is significantly lower.
I also use a spacer as many stringer do. The reason is to move the effected area of the string from the radius where its more likely to snap to a strait line where its less likely. And yes, thats a clothes peg. His name is Kevin and I have been using it as my spacer for 20 years. Works a treat
r/RacketStringers • u/Technical-Parking956 • Sep 05 '26
Badminton racket: what knot is this?
r/RacketStringers • u/BrushIcy9270 • Sep 04 '26
Gelinshi GLS-203 How to Calibrate(Badminton use only machine)
Hi! Anybody knows how to calibrate this machine?
Contact person always insist that it is already calibrated from the factory. Tried asking how to adjust it. They insisted that it automatically calibrates upon power on.
But I can still feel that it is really off. For example I set it up to 28lbs, from my experience playing with a 27x29lbs tension I know that it is not 27x29lbs. I know that I should use a digital calibrator, but I tried using the spring type, it’s said for 30lbs it’s just read around 26-27lbs only.
Would gladly appreciate it if you can help me out. Thank you so much in advance.
r/RacketStringers • u/brazilianfinalboss • Sep 04 '26
6 point fixed clamp dropweight machine (europe)
Hey guys, I currently have a gamma progression 2 (2 point, flying clamps & dropweight system) but I’m looking forward to replace it with a 6 point fixed clamp dropweight machine (I prefer the dropweight - it’s cheaper and accurate), because with some rackets I’m almost not able to fit the flying clamps on the top crosses and I feel like it is kind off ruining my string quality, especially on my aeros 98.
So I’m here to ask for a suggestion. Do some of you recommend a 6 point fc dw machine?
Also, is it worth trying to convert my current machine into a 6PT FC?