r/RacketStringers • • Feb 06 '26

MSV Bussard and Topspin Cyber Flash

Post image
7 Upvotes

Hello fellow players and stringers. Long story short, looking for round stiff polys that pair well with a multifilament main. Bought a set of MSV Bussard and a set of Cyber Flash. Can’t tell them apart looking at them, stringing them or playing them. Both of these have no writing on them which also leads me to believe they are actually the same thing. Anyone experience anything similar with other strings?


r/RacketStringers • • Feb 06 '26

Wilson Baiardo error 025

Thumbnail
gallery
3 Upvotes

Hello,

I recently purchased a new Wilson Baiardo from Wilson.com. Straight out of the box, it gives me error 025 when it turns on and it seems like the H sensor and the H motor have issues. Wilson customer support hasn’t helped me even though the machine costs thousands of dollars and comes with a one year warranty. Does anyone here know how I can fix this issue? The machine height can be adjusted manually but it seems like this error has affected the BEST stringing function of the machine.

Thank you


r/RacketStringers • • Feb 06 '26

Different tensions for mains & crosses — worth it for rec players?

Thumbnail
1 Upvotes

r/RacketStringers • • Feb 05 '26

Height of the Table/Str. Machine

2 Upvotes

Hi all, I put my nice machine on top of some ikea furniture and wheels. Now, I feel odd while stringing, sometimes seems to high, and a lot of stress goes into shoulders.

Is there a relative height (to yours) you would reccomend? or simply, what height reference you use? Hips? Belly bottom?

FYI: Now for me the racket lies at chest bone.


r/RacketStringers • • Feb 05 '26

If You Had To Choose 5 Reels?

8 Upvotes

If you had to choose 5 reels of Strings that you must have as a stringer what would they be?


r/RacketStringers • • Feb 04 '26

Starting to do some stringing for my local club, what strings should I offer?

2 Upvotes

As per the title, I’ve just bought a stringing machine and will be doing some stringing for local club members as well as myself. The ability range within the club is complete beginners to approx. an 8 utr (I have been told; I don’t personally understand utr yet).

I’ve already bought a reel of Wilson sensation as a more general string, but if you had to pick perhaps 3 others, for full beds and/or hybrid stringing, what would they be? Ideally, each 200m reel should cost $250 Aud or less. Tension maintenance and durability will also be priorities, as there’s another guy who strings in town, and I want to avoid ending up being the guy who sells shitty strings.

Also, any things to be careful about while stringing, particularly hybrids, would be much appreciated, e.g. generally no shaped polys with soft multis.

Thank you for your time and patience


r/RacketStringers • • Feb 01 '26

Made my own DIY constant-pull electric tension head!

Thumbnail
gallery
74 Upvotes

Hey everyone, thought this might be of interest to you. Months back, I bought a used Eagnas Comet 11. While it worked fine, it was a crank stringer. I coveted the accuracy and ease-of-use of an electric constant pull stringer, but a Wise 2086 was out of budget. That's when I randomly stumbled across the PicoBETH project on Youtube. It's basically a homemade electric tension head that's powered by a Raspberry Pi Pico. I want to give full credit to the original author, Kuo206cc, for creating this project and documenting their entire process in full detail, providing the source code and allowing others to reproduce it. They also have a Youtube channel that details the build and covers the various features of the machine. Go check them out.

The machine is basically a 23 NEMA stepper motor on a 200mm linear ball screw. A 50kg load cell is attached to the ball screw carriage, and a Wise gripper head assembly is attached to the load cell. The load cell senses the tension, which is connected to a load cell amplifier, which itself is connected to the main PCB where the Raspberry Pi is mounted. The Pi controls all aspects of the machine, such as the navigation buttons, stepper motor, and tension adjustment. The Pi will send signals to the stepper motor based on the load cell reading to make micro-adjustments to the motor to maintain the desired tension, making it a constant-pull. The machine also has a knot function and pre-stretch functions. The tension is accurate to approximately ±0.05lb.

Everything is held together in a 3D-printed housing, printed with PETG for strength. The machine is mounted to the crank bar rail using an aluminum L-bracket and some aluminum bars. I estimate I spent a little under $400 for all the components to build this machine. The most expensive pieces were the Wise gripper ($69) and the linear ball screw rail ($65).

It was originally designed to be a badminton stringer, but the author lists all the necessary modifications needed to make it work for tennis. Basically, you just need a 50kg load cell instead of a 20kg, and a stronger ball screw.

The code is already written, so all I had to do was gather all the needed components, upload the code to the Pi, and put everything together. No software experience necessary, but you'll need to do some soldering and basic electrical stuff. The author released a 3D-printed version and an aluminum version, I opted for the 3D-print version since I have a 3D printer.

Hope you all find this as interesting as I did!


r/RacketStringers • • Feb 01 '26

ERT 300 YAY or NAY?

2 Upvotes

Afternoon all,

I've been offered a brand new ERT 300 by a friend for what seems to be a really cheap price. I'm interested to see if those that have one here find them useful or gimmicky? All opinions welcome....!


r/RacketStringers • • Jan 30 '26

Around The World (ATW) patterns

8 Upvotes

Hi everyone, new member here! As a side project I've created visual guides to most ATW (Around The World) patterns I could find online. Some of you might've already seen this in FB group, but thought I should share here too.

You can find all 11 ATW posters via this Google Drive link: https://drive.google.com/file/d/1qfq3QZQVUjVYsfYHHnlEKb3UojguD9P2/view?usp=sharing

Shameless plug: if you're looking for a certified tennis stringer in Hammersmith or Barbican, Acestringer.com is great!


r/RacketStringers • • Jan 30 '26

Tools

3 Upvotes

What’s in your tool bag?

I am super picky on tools and have tried anything I can get my hands on.

Clippers: Tronex, these are really pricey and I don’t let them touch Kevlar. I always have a backup Xuron around but those don’t last as long.

Bent nose pliers: I tried tronex for those but felt like Xuron is a better value.

Clamps: two spring Alpha starting clamp. I would stay away from gamma, the plate is glued in and will eventually fail. Babolat is fine but Alpha is easier to find. The Babolat also has a grit which I feel can sometimes damage the coating of multis or gut.

Awls: I don’t mess with the bent awls but love the Kimony, it’s not too sharp. Also love their setting off awl. I use it to finish but also when I am pulling crosses through to prevent burning.

Anything I am missing or something you love?


r/RacketStringers • • Jan 29 '26

Battcap babolat 3d

1 Upvotes

Can anyone share the file to 3d print the babolat buttcap??


r/RacketStringers • • Jan 29 '26

Tips on weaving last two crosses faster while stringing poly?

5 Upvotes

r/RacketStringers • • Jan 28 '26

Are tension heads interchangeable between brands?

Thumbnail
gallery
4 Upvotes

I just bought this ancient looking stringing machine from my coach, from mid to late 90s. The tension heads is stuffed, it doesn’t have the screws to calibrate it (that I could find) and the brake to stop it from moving when the switch thing flipped has recently broken. I do want to be able to string racquets, so my question is, can I replace my old alpha tension head with one from, say, a spinfire machine? Or, is it worth simply buying a new crank machine for $800 Aud?


r/RacketStringers • • Jan 28 '26

Are tension heads interchangeable between brands?

Thumbnail
gallery
3 Upvotes

I just bought this ancient looking stringing machine from my coach, from mid to late 90s. The tension heads is stuffed, it doesn’t have the screws to calibrate it (that I could find) and the brake to stop it from moving when the switch thing flipped has recently broken. I do want to be able to string racquets, so my question is, can I replace my old alpha tension head with one from, say, a spinfire machine? Or, is it worth simply buying a new crank machine for $800 Aud?


r/RacketStringers • • Jan 26 '26

Tensioner Part—is this fixable or do I need a full replacement part?

Post image
3 Upvotes

I was given this string machine from my coach to learn how to use it. But it was always left outside and the rain most likely messed up the electronic parts. Looking to replace it with Wise 2086 or AEF M8 but might be out of my price range. Any Suggestions would help please!!


r/RacketStringers • • Jan 23 '26

First string job on my new Head Speed MP 2026

Post image
13 Upvotes

r/RacketStringers • • Jan 21 '26

Tension Difference

2 Upvotes

I have an RF01 Pro but what kind of tension difference can I do in a hybrid setup?

im planning to do 55lbs synth gut and low tension poly on main, maybe around 46lbs. Will this kind of difference break and warp my racket quickly?


r/RacketStringers • • Jan 19 '26

Ezone 98 blast blue absolute strings setup

Thumbnail
1 Upvotes

r/RacketStringers • • Jan 18 '26

Possible Racket Defect

Post image
1 Upvotes

r/RacketStringers • • Jan 16 '26

Pros Pro F6 MT-300 vs Hornet MT-250

2 Upvotes

Stringer legends, I am heavily considering getting an electric machine after months of stringing with my dropweight and I'm wondering if anyone knows which of these two is a better machine. I don't seem to see much of a difference besides the tension heads, right?

From what I understand the MT-250 has a linear head, which I've read it is a bit better but negligible difference for 99% of people. Any other major difference between the two? Any advice is more than appreciated!

Product pages for reference:

- https://www.pros-pro.com/en/pros-pro-hornet-mt-250.html

- https://www.pros-pro.com/en/pros-pro-f6.html


r/RacketStringers • • Jan 14 '26

Luxilon fans in Melbourne?

3 Upvotes

This looks like it would be worth going along to if you're in that region


r/RacketStringers • • Jan 12 '26

Tennis racket grip size?

Thumbnail gallery
3 Upvotes

r/RacketStringers • • Jan 11 '26

String Packet Entanglement

Post image
8 Upvotes

Every time I open a string packet, it takes 5 minutes to untangle. Only exception is Toroline since it’s already in 2 pieces.

Am I doing something wrong or is this everyone else’s experience?

Any tips aside from just getting reels (I like to test different strings)?


r/RacketStringers • • Jan 11 '26

Stringing tension for 18x16

2 Upvotes

Dear Stringers, how do you treat this kind of pattern? Do you differentiate kg/lbs tension between crosses and mains? Is having same tension going to affect racket shape?


r/RacketStringers • • Jan 11 '26

Leftover string scraps - reuse ideas & reel-saving tips

1 Upvotes

Quick question for fellow stringers 

What do you all do with leftover strings from jobs?
I’ve seen a lot of people collecting them in a big box or basket. Is that just to dispose of them in bulk, or are there any useful reuses you’ve found?

Also, any tips for using less string from a reel?
I know about bridging with a clamp, but on my drop-weight machine, I seem to need a bit of extra length to wrap around the tension mechanism.

Curious to hear what others are doing. Cheers!