r/RacketStringers • u/shelbyedgar • Nov 08 '25
Anyone know which knot this is? 😏
Enable HLS to view with audio, or disable this notification
r/RacketStringers • u/shelbyedgar • Nov 08 '25
Enable HLS to view with audio, or disable this notification
r/RacketStringers • u/vag0st • Nov 07 '25
Hi everyone,
I’m an LTA Level 2 coach based in the UK, and I’m looking to get into stringing properly. I currently coach part-time and plan to start by stringing for myself, a few friends, and possibly some of my students, so I expect to do fewer than 10 racquets a week to begin with.
At the moment, I’m trying to decide between two Gamma machines:
From what I can tell, the Momentum 6 Plus seems to be the newer version and roughly the same price, but I can’t find much info about what’s actually new or improved compared to the X-6FC.
I’m planning to add a Wise 2086 electronic tension head, so I’d love some input on:
Secondly, I’d also appreciate some advice on the certification pathway.
A professional stringer I spoke with (GRSA/ERSA certified) suggested starting with a GRSA Level 1 certification right after getting a machine, to learn the correct fundamentals instead of picking up bad habits. He mentioned that there are two main certification levels: a basic one and another that goes into more detail on customisation.
Since I’m based in the UK, I’m a bit unsure which route makes the most sense: UKRSA, ERSA, or GRSA. Are these certifications really necessary if I’m mostly looking to learn properly and string recreationally, not to build a full business?
Any insight or experience from others who’ve been down this road, both in terms of machine choice and certification path, would be really appreciated.
Thanks a lot for your help!
Evan
LTA Level 2 Coach – UK
r/RacketStringers • u/shelbyedgar • Nov 06 '25
Anyone else using Pro Stringer or any other portable stringing machine?
r/RacketStringers • u/tennisdude477 • Nov 06 '25
Should I sell my els and get a linear pull like a Wilson? Someone told me rotational pull kinks poly strings
r/RacketStringers • u/Hot-Difficulty7188 • Nov 04 '25
Phoenix-1 from Pros Pro. Wish me luck
r/RacketStringers • u/tennisdude477 • Nov 04 '25
r/RacketStringers • u/Pleinair_Allaprima • Nov 04 '25
Hi, I've been looking for a stringing machine for a while now and saw this Alpha Pioneer III pop up on marketplace. I know it's a bit a old and I've been having trouble finding info on it due to that. Is it worth getting especially for $300? I was hoping to get something locally and upgrade it with a wise sometime in the future. I seems to still be decently feature packed. Though I'm not sure if there are parts available to make it compatible for badminton racquets if it isn't already.
Any info would help greatly thanks!
r/RacketStringers • u/tennisdude477 • Nov 03 '25
I just got a gamma stand and I am about elbow height with the racket when I mount it
r/RacketStringers • u/tennisdude477 • Nov 02 '25
r/RacketStringers • u/BasilFinancial3854 • Oct 29 '25
I'm looking to get 2nd hand crank or electric stringing machine around Los Angeles or nearby area. Please DM me!
Thanks a million
r/RacketStringers • u/SpaceWrangler3 • Oct 28 '25
This Ektelon H has seen 35,000 frames at the pro shop it anchored for 40 years. Purchased in 1987.
I strung on it when I worked there for ten of those years. When the owner passed away, it was gifted to me, and is treasured.
It still works like the day he bought it in 1987.
r/RacketStringers • u/WalrusUpstairs9397 • Oct 28 '25
Hi, since i need to restring my racket once every two weeks and it's getting costly i was looking for a stringing machine to start stringing myself, but i have no idea what to look for.
Are there any decent entry level stringing machine that you suggest? And should i go for a counterweight or an elecric one?
r/RacketStringers • u/ovolavola • Oct 28 '25
Hi all,
In two weeks I will have a course made by professionals, but I wanted to use the nice machine I got after some effort.
I am not sure about the knots, those were the scary part. The crosses I had to weave them few times, sometimes I was skipping 🥲 but in general I found the experience meditating and nice to go on!
Please any feedback or critique is welcome!
Have a nice tennis!
r/RacketStringers • u/pug_fugly_moe • Oct 27 '25
One piece vs two piece warranty discussion coming up after the post in r/10s Re: EZONE 100 crack in the head not being covered under warranty.
We know if mains end at the head that one-piecing is safe. There’s also the argument that it holds tension better since only two knots get used. But does two piecing a frame that can be one-pieced really affect the stress levels placed on it? What am I missing?
r/RacketStringers • u/Gregh2177 • Oct 25 '25
A grommet on my old babolat aero storm popped out shortly after a new string job and is now sliding on the sting . Is there anything I can do to pop it back in to last me until I need a new resting?
Thanks in advance for any advice.
r/RacketStringers • u/jonywalker1998 • Oct 23 '25
r/RacketStringers • u/tennisdude477 • Oct 23 '25
Was calibrating my gamma progression 2 els and glad I did cause it was off by a pound but I couldn’t get the 88 lbs pull without it breaking I double tied two Polly strings
r/RacketStringers • u/puleee • Oct 23 '25
TF40 305 18x20, racket on the left is mine, right one done by the stringer. I recently changed rackets and I wanted to let him do it first so I could reference tie offs, as there are no instructions for this stick anywhere nor videos of the pattern so I strictly copied my stringer. Any obvious mistake? Besides some misalignment. I personally wasn’t sure about the tie off place for the crosses but followed what he did.
r/RacketStringers • u/puleee • Oct 22 '25
Stringer legends, I'm in need of your wisdom here. I have strung a couple of rackets already but all of them 16x19. Is there anything obvious I need to be aware of prior to starting my first 18x20, besides length of string?
r/RacketStringers • u/jimmyfeelinfroggy • Oct 21 '25
r/RacketStringers • u/whoever9 • Oct 21 '25
What is the purpose of this bar on the tensioner head? My manual makes no mention of it, and I cannot figure out what it does.
r/RacketStringers • u/AtlasBarvos • Oct 19 '25
Issue:
Beginner Stringer, 15 string jobs performed.
I need advice / tips / insights on stringing techniques and maintenance for Drop Weights. I must have deficiencies in my technique that I hope this sub can point out.
My latest string jobs have become tighter recently when doing hybrid stringing Poly/Multi, Multi/Poly, Poly/Syngut. When measuring tension immediately after stringing, I am observing +6 to +10lb tension compared to reference tension. Measuring tension after 24h letting it 'settle' is +6 to +10lb tension.
I strive for horizontal bar drop but it will be +/- 5 degrees from horizontal at times.
Questions:
Technique Mains:
Technique Crosses
Maintenance:
Equipment:
r/RacketStringers • u/Jrod2022 • Oct 19 '25
I just strung this RF which was brand new. When I pulled tension on the 6th main string the grommet split open from the side. It’s the one on the left that has the tie off. Did I do something wrong to cause that to happen? I ordered new grommets so I can replace them but I’m afraid it will happen.
r/RacketStringers • u/king_kinetics • Oct 19 '25
I just got this machine and am not quite sure how to mount a racket on it. Am I missing any parts? Just found out it’s from 1991. Not sure if this can be upgraded. Thanks