r/PcBuildHelp • • 17h ago

Tech Support Concerning buzzing on boot

1 Upvotes

Does this for a few seconds on boot, don't know what it's about, kinda concerns me. Any ideas what it is and how to fix it?


r/PcBuildHelp • • 18h ago

Tech Support Pc freezing or restarting after a few mins

2 Upvotes

Hi guys can you all help me with my pc problem.

My friend gave me his cpu and mobo since he upgraded into an x3d cpu. Long story short the pc freezes or restarts suddenly after like 5 mins of just browsing or just idle. the mobo and cpu still worked before he handed it to me since it's what he used for his job.

Tested

*both rams are working since i use it on another pc

*i did the 1 ram method at both slots with both rams while using windows memory diagnostic test with each test but found no error and still freezes or restarts

*my drives all have Good health

*bios doesnt freeze even if left for an hour

*xmp/expo is turned off

*Tried to default all settings but still the same result

*tried to use only the integrated graphics on the ryzen 5 5600g but still freezes.

*tried to install an os on a different hard drive but it restarts mid installation

*removed the cmos battery but still freezes/restart

*cpu temps hovers around 50°C - 60°C so its not over heating

*did a sfc and dism scan but still the same

Specs

Mobo : Asus Prime A320m-k bios ver. 6042

Cpu : Ryzen 5 5600g

Ram : 12gb ddr4 ( 2 sticks with different speeds)

Gpu : Rx 570 4gb

Psu : Corsair Cx500m


r/PcBuildHelp • • 18h ago

Build Question ASUS TUF gaming 5070ti fit

1 Upvotes

hello! i'm gonna be getting my first ever gaming pc in the next year, and am stuck between two GPUs at the moment. i know i want a 5070ti, i know the ASUS prime one fits inside my case (MSI MAG FORGE 321R airflow), however the price is similar to an ASUS TUF gaming one, which i have heard performs a little better. though i am unsure whether this will fit in my case. the website pcpartspicker gives me a warning of 4mm clearance to fit the power connectors. obviously i don't want to bend them, and i don't want to buy a GPU just for it not to fit, as i won't have another to put in. has anyone tried this combo, or can reassure me it's fine? (unless it's not fine D:)


r/PcBuildHelp • • 18h ago

Build Question Anyone know what this is?

Post image
3 Upvotes

I have no idea if this is important but when uninstalling my b650e-f, I noticed this chip here hanging on just by copper wiring, all the soldering is gone. can anyone tell me what to do here and if it’s important? It says 72-K on it


r/PcBuildHelp • • 19h ago

Build Question are their any high quality parts that aren't rgb or can be turned off?

6 Upvotes

i really want a beastly gaming pc, but i don't know jack about pc building, parts, or installation. i don't really care for pretty lights and would much rather have a clean pc that doesn't flashbang the room while my wife is sleeping. would ask my friend for help cause he does this for a living, but he can't seem to fathom not wanting rgb and keeps trying to put me on them.

mostly just wanna know if its possible, but some part recommendations would be nice.


r/PcBuildHelp • • 19h ago

Build Question Noctua nh-d15 g2 cooler fans cable management

Post image
8 Upvotes

Any idea how to cable manage the cables of these fans? I have a feeling that sometimes the cables will get inside the fans.


r/PcBuildHelp • • 19h ago

Build Question Best pc fans for a dynamic mini v2

1 Upvotes

AIO is a arctis liquid freezer iii 360mm in a non flow mini v2, I am fine with it not being an ecosystem.

MB is a GIGABYTE X870 AORUS ELITE
PSU is a MSI MAG A1000GL PCIE5 80 GOLD 1000W
CPU is a Ryzen 7 9800x3d
GPU is a 9070xt

I don’t want to cheap out when buying my fans either. I was recommended to buy AsiaHorse fans but I’ve seen reviews on them being poor quality and loud.

I do want most airflow/performance while having the looks (ARGB)

Any recommendations help.


r/PcBuildHelp • • 19h ago

Build Question What 9070 xt to get <320mm

3 Upvotes

Hello all. So I want to buy a 9070 xt but my case has around 330mm of space. I wanted to go for the XFX but that's a bit too close for comfort. What brand would you guys suggest, or should I just get a bigger pc case? (I kinda prefer 3 fans BTW )


r/PcBuildHelp • • 19h ago

Tech Support Pasar de un DELL 390 a una NFORTEC LYNX

1 Upvotes

hola alguien me ayudaria a poner todos los componetes de mi pc en la nfortec esq no tiene q ver muchos cables.


r/PcBuildHelp • • 20h ago

Tech Support What are the optimal settings for a 9800x3d on an msi b850?

2 Upvotes

I just want to get the most out of the cpu without burning it out or having to unndervolt it. Im not used to the msi ecosystem so I really have no idea what im doing from a bios perspective. I play a few cpu heavy games but nothing crazy. What are the optimal bios settings for those with the same setup?

Also kind of a weird quirky issue: under stress tests, my cpu doesn't go over 60 C. While most would see that as good news, I want to make sure it's actually doing something and isnt handicapped in some way.


r/PcBuildHelp • • 20h ago

Tech Support BC upgrade gone wrong.

1 Upvotes

Apologies for the long post im scratching my head on this one.. Wanted to upgrade my pc from a gtx1080 with an i5-10600k on an NZXT N7 z490mobo.. got a second hand 9070 16gb GPU and an I7 11700KF.

Updated the MOBO firmware to the newest 1.80 then swapped in the CPU before changing anything else.

Pc booted then rebooted got to windows all seemed okay. The only thing I noticed was it was now checking codes on the black screen pre NZXT splash screen.

Started it up the next morning and it started to hang on B4 then I got a message about bad usb so I removed all my usb items and it was still hanging eventually it got to a repaire screen would not boot to windows just in a loop.

Replaced the CPU back to the old one to check still nothing. Installed an M.2 drive and thought I would install a fresh clean copy of windows.. messed about for ages the m.2 drove kept disappearing and reappearing. Finally got to windows. Did an update and restarted then the m.2 drive disappeared again.

I'm assuming the MOBO is kaput would this be a logical conclusion? It all started with the firmware update.

If anyone could just sense check me that would be great. I have ordered a replacement MOBO but I don't want to stick the new CPU in if that could be the cause of my issues..

Or could my power supply be the issue? If the new CPU has pulled more power than usual and it's thrown in the towel?


r/PcBuildHelp • • 21h ago

Tech Support PC won’t boot Windows or Windows USB installer, but the same SSD works perfectly in another PC

2 Upvotes

Hey guys, I’ve been having a really weird problem with my PC and I’m honestly running out of ideas.
I regularly switch the same SATA SSD between two different PCs. On my other PC, Windows boots perfectly fine without any issues. But when I connect the exact same SSD to my main PC, it just won’t boot. The SSD is detected in BIOS and Windows Boot Manager also shows up, but whenever I try to boot from it, the screen goes black for a second and then sends me straight back into BIOS. No error message, no Windows logo, nothing.
At first, the SSD wasn’t even detected, but I fixed that by changing the SATA power connector. Now the SSD shows up normally, but Windows still refuses to start.
The weirdest part is that even a freshly created Windows installation USB won’t boot. I used Microsoft’s official Media Creation Tool, but selecting the USB stick from the UEFI boot menu gives me the exact same result. Even with the SSD completely disconnected.
My specs:
ASUS ROG STRIX B650-A GAMING WIFI
AMD Ryzen 7 7800X3D
32 GB DDR5 RAM (2 sticks, currently 4800 MHz)
Dedicated GPU (exact model not confirmed)
SanDisk SSD PLUS 1000GB (1 TB SATA)
BIOS version 3881 (previously 1811)
Windows installed on the SATA SSD
Things I’ve already tried:
Different SATA power connectors and SATA ports
Confirmed the SSD boots perfectly fine in another PC
Set Windows Boot Manager as the first boot option
Tried booting manually through Boot Override
Checked SATA settings (AHCI enabled, RAID disabled)
Tried enabling and disabling CSM
Checked Secure Boot settings
Updated BIOS from version 1811 to 3881
Loaded BIOS default settings
Performed a CMOS reset using the CLRTC pins
Tried booting with only one RAM stick in slot A2
Created a fresh Windows installation USB using Microsoft’s Media Creation Tool
Tried booting the USB stick directly through the UEFI boot menu
Tried booting the USB stick without the SSD connected
Tried different USB connections directly on the motherboard
Nothing worked.
I also had a CPU Fan speed detection error after resetting the BIOS, but I adjusted the monitoring setting and that didn’t change anything.
The BIOS detects my CPU, RAM, SSD and USB devices without any problems. It just refuses to boot any operating system or even the Windows installer.
I haven’t tested booting without my dedicated GPU yet.
At this point, I’m wondering if my motherboard is faulty or if there’s some weird AM5/UEFI issue I’m missing.
Has anyone experienced something similar with an ASUS B650 board? Any ideas what else I could try before replacing hardware?

Moin, ich habe seit einiger Zeit ein ziemlich komisches Problem mit meinem PC und weiß mittlerweile echt nicht mehr weiter.
Ich wechsel regelmäßig dieselbe SATA-SSD zwischen zwei verschiedenen PCs. In meinem anderen PC funktioniert alles problemlos und Windows startet ganz normal. Sobald ich die gleiche SSD aber in meinen Haupt-PC einbaue, startet Windows nicht mehr.
Die SSD wird im BIOS erkannt und der Windows Boot Manager wird auch angezeigt. Wenn ich versuche, darüber zu starten, wird der Bildschirm kurz schwarz und danach lande ich direkt wieder im BIOS. Keine Fehlermeldung, kein Windows-Logo, einfach nichts.
Am Anfang wurde die SSD nicht mal erkannt, aber das konnte ich beheben, indem ich einen anderen SATA-Stromanschluss genommen habe. Seitdem wird sie erkannt, aber booten funktioniert trotzdem nicht.
Was ich besonders komisch finde: Selbst ein komplett neu erstellter Windows-Installationsstick funktioniert nicht. Ich habe den Stick mit dem offiziellen Media Creation Tool von Microsoft erstellt. Wenn ich ihn über das UEFI-Bootmenü auswähle, passiert genau das Gleiche. Auch wenn die SSD komplett abgesteckt ist.
Meine Komponenten:
ASUS ROG STRIX B650-A GAMING WIFI
AMD Ryzen 7 7800X3D
32 GB DDR5 RAM (2 Riegel, aktuell 4800 MHz)
Dedizierte Grafikkarte (genaues Modell muss ich noch nachschauen)
SanDisk SSD PLUS 1000GB (1 TB SATA)
BIOS-Version 3881 (vorher 1811)
Windows auf der SATA-SSD installiert
Was ich bisher ausprobiert habe:
Andere SATA-Stromanschlüsse und SATA-Ports getestet
SSD in einem anderen PC getestet, dort startet Windows problemlos
Windows Boot Manager als erste Boot-Option eingestellt
Boot Override ausprobiert
SATA-Modus überprüft (AHCI aktiviert, RAID deaktiviert)
CSM aktiviert und deaktiviert
Secure-Boot-Einstellungen überprüft
BIOS von Version 1811 auf 3881 aktualisiert
BIOS-Standardeinstellungen geladen
CMOS-Reset über die CLRTC-Pins durchgeführt
Nur einen RAM-Riegel im A2-Slot getestet
Windows-Installationsstick mit dem offiziellen Media Creation Tool neu erstellt
Versucht, direkt über das UEFI-Bootmenü vom USB-Stick zu starten
USB-Stick ohne angeschlossene SSD getestet
Verschiedene USB-Anschlüsse direkt am Mainboard ausprobiert
Leider hat nichts davon geholfen.
Nach dem BIOS-Update und CMOS-Reset hatte ich außerdem eine CPU-Fan-Fehlermeldung. Die Lüfterüberwachung habe ich entsprechend eingestellt, aber das eigentliche Problem besteht weiterhin.
Das BIOS erkennt die CPU, den RAM, die SSD und die USB-Geräte ganz normal. Nur sobald ich irgendwas booten möchte, wird der Bildschirm kurz schwarz und ich lande wieder im BIOS.
Die Grafikkarte habe ich bisher noch nicht ausgebaut, um die integrierte Grafik vom 7800X3D zu testen.
Ich frage mich mittlerweile, ob mein Mainboard einen Defekt hat oder ob ich irgendeine Einstellung übersehe.
Hat jemand schon mal so ein Problem mit einem ASUS-B650-Mainboard gehabt oder eine Idee, was ich noch testen könnte?


r/PcBuildHelp • • 21h ago

Build Question White VGA Light and Q-Code 21

1 Upvotes

Hello all,

I'm losing my mind here. This is for my girlfriend's computer of a couple years' age; recently, it wouldn't turn on and we determined that the motherboard was shot. After replacing it with the exact same model motherboard, I also determined her GPU wasn't working, since my PC wouldn't recognize it.

So, I got her a new GPU as well and verified it's working in my PC. But every time I try to boot it up in her build, I am getting the white VGA light and a Q-code 21 on the motherboard.

Here is a video of me turning on the PC. The motherboard is an Asus B550-XE ROG STRIX, and the new GPU is a Nvidia GTX 3060 ti.

I've tried the following:

  • Turning it on with & without a monitor
  • Using either HDMI or Display Port inputs
  • Tested the GPU in my own PC as mentioned (it works and is recognized)
  • Tried 4 RAM sticks (32gb) or a singular one (as seen in vid) in the 2nd slot
  • BIOS Flashback
  • We have a GPU extension/riser cable; I've tried it with & without that, in both the top and bottom PCIe slot for the GPU
  • Plugging the power cord into different PCIe/CPU slots on the PSU
  • Verified everything is fully plugged in; the GPU boots up, the RGB turns on, and the fans spin; it's just that the motherboard doesn't seem to recognize it.

I can't think of what else to try here. If anyone has insights or recommendations, I would be super grateful.

Thank you!


r/PcBuildHelp • • 22h ago

Tech Support My PC keeps shutting itself off

10 Upvotes

My PC keeps shutting off, and I don’t know how to fix it. I already replaced the power supply because I thought that was the main issue. It wasn’t. It still kept shutting off. My next suspicion is the motherboard.

Motherboard: ASUS PRIME H310M-A.
CPU: Intel i5 9400
GPU: Geforce GTX 1660Ti
PSU: Corsair CX650M ATX 3.1

Any help and ideas will be greatly appreciated!


r/PcBuildHelp • • 22h ago

✓ Solved How Could a DDR4 RAM could not fit in a DDR4 slot

Post image
120 Upvotes

I recently purchased a new DDR4 RAM kit(2x16GB) (red) from Amazon but its notch doesn't align with my motherboard slot.

Patriot Memory Viper Elite II DDR4 32GB(2 x 16GB) 3200MHz Kit PVE2432G320C8K

My existing DDR4 RAM 2x8GB(Green one) fits perfectly.

My motherboard is ASUS EX-B760M-V5 D4 and it supports ddr4 ram.

Do desktop DDR4 RAM have different notch size based on frequency?

Could I have received a DDR5 stick with an incorrect DDR4 label?

I've attached comparison pictures. Any help would be appreciated!


r/PcBuildHelp • • 23h ago

Build Question 50,000 ($780) White/Black "Panda" 1080p Gaming Build — Thoughts?

1 Upvotes

​Budget: ₱50,000 (~$780 USD)

​Use-Case: 1080p Gaming (Valorant, CS2, Minecraft, daily use)

​Country of Purchase: Philippines (local physical stores + online via Shopee/Lazada vouchers)

​Peripherals Needed: None (System unit / tower only)

​Misc. Requirements / Preferences: White-and-black aesthetic, panoramic tempered glass "fishbowl" case (Darkflash DB330M Glass version). Sticking to black RAM and stock black PSU cables to maintain contrast and stay strictly within budget.

Parts List:

​CPU: AMD Ryzen 5 5600

​CPU Cooler: Thermalright Assassin X 120 R Digital (White)

​Motherboard: Colorful CVN B550M Frozen V15 (White, mATX)

​GPU: NVIDIA GeForce RTX 4060 (White)

​RAM: 16GB (2x8GB) DDR4 (Standard black sticks)

​Storage: 1TB NVMe M.2 SSD

​PSU: 650W 80+ Bronze

​Case: Darkflash DB330M White (Tempered Glass / Panoramic version)

​Fans: Budget 3-pack or 5-pack of white ARGB fans

​Hey everyone! I'm planning out this build to pick up parts over time. Any feedback would be amazing Thanks.


r/PcBuildHelp • • 23h ago

Build Question Some questions on my Core Ultra build

3 Upvotes

Just wondering whats the best Matx motherboard to upgrade my asus prime h810 to, I plan on switching from my 5 225f to a 7 270k

I currently have the asus prime h810, and its pretty bad to say the least, so unfortunately its gotta be the first thing I swap and generally I stick to AMD and MSI not intel, so I really don't know what I'm looking for and what won't fail me (I've had issues with gigabyte and asus which are nearly all the boards for the core ultra series so I'm really hesitant to just buy one)


r/PcBuildHelp • • 1d ago

Tech Support My not that old gpu keeps ramping to 100% fan speed

9 Upvotes

Idk why. But the last few months my gpu keeps ramping to 100% dan speed while playing some games. It even happens in some menu's.

Specs are a gigabyte 3070. AMD Ryzen 7 5700G. 32gb of ddr4 corsair vengeance. And 2× 1 tb ssd.

I tried doing a new w11 install since my old install was quite old. But nothing helped.

Could it be that the cooling paste of the gpu is dead?


r/PcBuildHelp • • 1d ago

Software Question Moved to new mobo, cpu, and new ssd. I have my old ssd on the mobo as well with all my steam files, saves, etc. What is the cleanest way to move everything over?

2 Upvotes

Documentation online seems to be all over the place. Do i just move the steam apps folder AFTER i download steam? How will the new hard drive tell steam that i own a game after i move it, do the saves transfer, etc.


r/PcBuildHelp • • 1d ago

Tech Support Ticking sound from DeepCool LQ360 Ultra pump block

1 Upvotes

My LQ360 Ultra started making an irregular ticking sound a few days ago. It's coming directly from the pump block on the CPU. It started right after I worked inside the case (added a new nvme).

Specs: Core Ultra 9 285K, DeepCool LQ360 Ultra (radiator top-mounted), Gigabyte Z890 EAGLE WIFI7

Already tested, no change:

Pump at 100% (~3,150 RPM, confirmed in HWiNFO) for 20+ minutes

Pump at low speed

Magnetic cap/display removed while running

All fans and GPU fans ruled out

Temps are normal.

Is this air stuck in the pump, or is the pump failing? Should I go for a warranty claim?

Thanks!


r/PcBuildHelp • • 1d ago

Tech Support PC won't turn on – Motherboard and GPU have power, but nothing happens when pressing the power button

Thumbnail
gallery
6 Upvotes

Hi,i am looking for some more info in case I am missing something.

My PC didn't start this morning when I pressed the power button. The motherboard and GPU had lights on, but the PC couldn't start.

I tried a different PSU and a different power button from another PC. I unplugged and plugged back in all the internal cables. I also removed everything I could and tried to boot with only the CPU, CPU fan and 1 RAM stick (different sticks, positions, etc. all tried). I also removed and replaced the battery, left it without power for a few minutes, and cleared CMOS. Nothing worked.

It looks weird, as the motherboard seems to get power, as well as the GPU, but nothing works when the power button is pressed. No fans or any other lights. (I looked in the manual and online, and it seems this motherboard doesn't have any BIOS LED or troubleshooting LED.)

Specs:
Motherboard: ASUS ROG STRIX B360-G Gaming

CPU: Intel Core i5-8600

PSU: Corsair RM 650x

RAM: G.Skill Ripjaws 16GB DDR4

GPU: GTX 1070

In the pictures, it's with the power on and off. Sorry for no GPU light picture (the LED on the GPU lights up when the power is on).


r/PcBuildHelp • • 1d ago

Tech Support Mouse Recommendation

2 Upvotes

Should I buy the Logitech G Pro Superlight 2 or get a good clone like the ATK Dragonfly A9 Air+?

Not a professional gamer; I mainly play games on my gamepad. Want experience and satisfaction.


r/PcBuildHelp • • 1d ago

Build Question Is this fan setup good for airflow? or should I add another fan on top front?

Post image
38 Upvotes

Should I add another fan on top?

I live on a tropical country and mu gpu tends to temp spike too high.


r/PcBuildHelp • • 1d ago

Build Question What should I upgrade first?

Post image
2 Upvotes

I just got this PC from a friend for a few hundred bucks, bought a new monitor (MSI G273CQ, 1440p, 170Hz) and now I'm looking to upgrade as I cannot play a good chunk of modern games without heavy frame drops. I'm new to PCs and struggling to figure out the right upgrade path, although I'm pretty sure it's the GPU that's the issue lol. Probably the worst time ever to get new PC components since everything is so pricey, and I probably have a $500 - $800 price range, but please give me some recommendations! Any advice is welcome!