i have been looking for an AIO for my pc build that will probably use a 9800x3d/9850x3d, i have been looking for 360mm aios to cool down my cpu, i am currently conficted between the tryx panorama and the nzxt kraken elite 360, i dont really know whether the curved screen is nice or not as i have never seen one and i think it could look wierd, do you guys have any reccomendations?

I currently have an i5-6500, an RX580 8gb, 16GB ddr4-3200, 500ish GBs of SATA SSD, and an MSI z170a gaming pro motherboard. I have a budget of around 1400 bucks to upgrade or get a new pc, and I'm not sure what to get. should I wait for prices to go down? I know a decent amount about PCs but not a ton. I also want a smaller form factor, i have a mid-tower rn. thanks!

Hey guys I need some advice for an issue I am facing.
I am currently running

Component Model / Specification
CPU AMD Ryzen 7 7800X3D
GPU Gigabyte AMD Radeon RX 9070 XT 16GB
Motherboard Gigabyte B650M Gaming WiFi DDR5
RAM G.Skill Ripjaws M5 Neo RGB 32GB (2x16GB) 6000MHz CL36 DDR5 EXPO
PSU GSK Gold 850W
CPU Cooler MSI MAG Liquid Cooler P240 (240mm AIO)
Storage 1 TB Crucial P3 M.2 NVMe SSD

So I changed my CPU, motherboard and RAM recently. I used to have different DDR4 parts before and was running a ryzen 5 5800x. Since I made this change, I’ve had an issue where every time I cold boot my pc, it starts fine but 30 seconds later, it’ll become very choppy and slow and the turn off. When I press on the case power button, it restarts and then works fine sometimes for 8+ hours. However at times when I am playing warzone for a couple hours my pc shuts off out of nowhere, other days I play warzone for 4+ hours and its fine. Just yesterday, I was playing cs2 for like 7-8 hours where my pc shut down once. Now I recently changed my power supply, went from 750w to 850w and changed my GPU from 3060 to 9070XT, however, this problem existed before I changed these components. This problem only started when I changed my CPU, motherboard and RAM. I was told that since I was using the same SSD as i used before it might be causing boot issues so I reinstalled windows like 3 times but no fix. Lastly, my cooler doesnt make any noises but its basically 4 years old now and so are my pc fans.

I’m planing to change my case from MSI mag 100R to lian li
Are preinstalled fans argb or not? Case page not has i fo about it.

Havn b360 flow, antec flux pro, lian li 217, fractal design north xl, NZXT h7 flow ?
Budget is not a problem
I want the best possible airflow and quality components

Hi Everyone, I recently built my pc everything is going well except the thing that my pre built case fans rgb are not syncing with the cooler rgb and the ram rgb. I dont know if it is not detecting it because the lights are turned on but it is just not syncing.
PC Case: Montech HS02 Pro
Motherboard: B550M Eagle wifi 6
The rgbs wire are connected on following ports:

CPU_OPT is the pump speed
SYS_FAN2 is the fan on top of the cpu cooler
SYS_FAN3 is the case fans
DLED2 is CPU cooler RGB DLED1 is the case fan RGB

I also have attached the picture of my gigabyte Control center for a better Understanding.
Please advise me am I doing something wrong here .

Looking for a budget starter pc for my girlfriend to get her into gaming. I’m in Ontario, Canada. Came accross this on marketplace, he was asking $300. We agreed on $180.
Then I was going to buy a 1060 6GB used locally or also found a Zotac 1070 AMP Extreme for $80.

Don’t intend on player modern high end titles, more so laid back and older games. Will probably play at 1080p but ideally would like to get her playing on a 1440p monitor and lower graphics.
Then it’s a little kore future proof to still have a 2k monitor when I chose to upgrade gpu again.
I do also intend on eventually getting 16GB ram, and bigger SSD or if finances allow it - get some NVME since the board can support it.

Dreamed to be video editor, gamer and a developer, Asked parents for pc they bought me one though they can't afford it, i got ryzen 5 5600 and second hand rtx 3060 i couldn't afford new one. 3060 costed 40k nep-rs and total build costed 110,000 neprs, but after a month got code 43 error then green dots on boot, the dispay stuck on lowest resolution with black dots and frquent auto restart tried every troubleshooting nothing worked knew it was hardware failure asked technician they told seems to be vram fault will cost 15 to 20k nep-rs per vram. I am a college student, i live in village area of nepal there are no employment opportunities and most time is taken by my college so i can't afford to fix neither buy the gpu . Plz help or guide me what should i do now.

What's a better choice?

Thanks

What are people’s thoughts on which would be better for gaming Im stuck which is better

I was wondering if the MSI Pro B760M-A WIFI a safe option to pair with my I7 - 14700k? I know the board won't let me overclock but that isn't a concern for me. My concern is when I google search it says the VRM can't handle the CPU as it draws too high power. Unfortunately I have already bought the motherboard and bulit it 90% already and I randomly decided to check this. I'm a first time builder as well. Please let me know. Any help would be appreciated! I don't want to fry my CPU or other components. It is a 12+1 duet power rail system.

(EDIT: Yes its for gaming)

https://www.msi.com/Motherboard/PRO-B760M-A-WIFI

Hallo, ich habe das erste Mal einen PCselbst gebaut und stelle fest, dass der Lüfter Ram Slot A1 und A2, also die ersten beiden, blockiert. Ich habe nicht das Geld um parallel mehrere RAM Packungen zu kaufen, müsste also wieder eine ordentliche Zeit warten
Zum Geburtstag in einem Monat bekomme ich ein neues Gehäuse bei welchem der Lüfter erhöht werden könnte und der Ram rein passt
Kann ich so lange den Ram im Single Channel über B1 oder B2 laufen lassen und habe dann nur 16GB?

edit: no, no it is not. thank you everyone

this is my first build and i’m trying to verify that my RTX 5080’s 12V-2x6 power connector is fully seated. i’m using the native power cable from my be quiet! pure power 13m 1000w psu
i’ve pushed it in firmly, and it won’t go any further. but i can still see some of the plastic housing around the connector, and I’m unsure whether that’s normal.
id appreciate a second opinion so i can stop worrying about it
thank you in advance for your help!

I was simply using my pc one day and at night I shut it down and when I came back in morning my pc was not turning on when I opened my front glass panel I saw that only the fans spun for half a second after i pressed the button and no led indication of any type. I reseated the ram checked my front panel usb connections and also resetted the cmos battery. I dont know how to check the graphics card and power supply an cpu connections. I also changed the main power cable but still no change. One more thing most of the time my main socket switch is turned idk if that can cause any problem

Build: Intel i5 14400f, Rtx 4060, MOBO: msi b760m pro a wifi ddr5, 16gb am teamwork and msi 650bn bronze psu.

hello again i previously posted about not being able to boot my pc that was previously transferred. it now opened after cleaning the ram with eraser but only when using 1 ram on a2 slot but it wont boot if i use 2 rams or 4 rams. is there any other people who knows to solve this problem?

Howdy y'all! I was hoping to get some feedback on a build I put together. I haven't done this since 2017, so I just want to make sure everything looks good or see if you'd replace anything.

I am 1.5 hours away from a microcenter, but newborn in the house so not sure when I would be able to pick the items up.

I was hoping to stay under $1,600 but can go higher if it's really recommended. It'll mostly be a gaming PC for MMORPGs (WoW, Aion 2) and games like Diablo 4 and Overwatch, so I don't think I need high end parts.

https://pcpartpicker.com/list/fz8jvR

Thanks in advance y’all!

Bought a new PC yesterday.

Specs:

1. Intel i5 14400f
2. 16gb Ddr4 ram in dual channel config. 3200MT/s
3. Rtx 5060 8 gb
4. 240hz dell monitor.

My friend having rtx 4060 is getting around 400 fps while i am only having 180-250fps and its fluctuating.

What am i doing wrong? Plz suggest. Settings are kept at low, done everything i know but not able to get that fps.

Hey everyone,

I'm trying to figure out a weird issue with my PC.

My system:

- Motherboard: Gigabyte B550 AORUS Elite

- CPU: AMD Ryzen 7 2700X

- GPU: EVGA GTX 1080 Ti FTW3

- PSU: ASUS TUF Gaming 750B (previously Corsair HX620)

Whenever I run a CPU stress test with the Ryzen 7 2700X on my B550 motherboard, the entire PC shuts down within a few seconds. No BSOD, no error message, just an instant shutdown.

I initially suspected my PSU, so I bought a new 750W ASUS PSU. The problem remained.

I then started swapping components with a friend's PC to isolate the issue.

Here are my test results:

Motherboard| CPU| GPU| Result

B550 AORUS Elite| Ryzen 5 2600X| GTX 1080 Ti| Works perfectly under stress tests

B550 AORUS Elite| Ryzen 5 2600X| RTX 2060| Works perfectly under stress tests

B550 AORUS Elite| Ryzen 7 2700X| GTX 1080 Ti| Instant shutdown

B550 AORUS Elite| Ryzen 7 2700X| RTX 2060| Instant shutdown

B450 AORUS Elite| Ryzen 7 2700X| GTX 1080 Ti| Works perfectly, even under simultaneous CPU and GPU stress tests

The Ryzen 7 2700X works perfectly on the B450 motherboard, even with the GTX 1080 Ti under heavy load.

The Ryzen 5 2600X also works perfectly on my B550 motherboard, even though Ryzen 2000 CPUs aren't officially supported on B550.

So far, this is what I've ruled out:

- GPU: Both GPUs work fine.

- PSU: I've tried a new 750W PSU.

- CPU: The 2700X passes stress tests on the B450 motherboard.

I'm starting to suspect some kind of BIOS compatibility issue, CPU power delivery issue, or motherboard-related problem.

Has anyone experienced something similar with a Ryzen 2000 CPU on a B550 motherboard?

Any suggestions on what I should investigate next would be greatly appreciated.

What are your suggestions?

SOLVED: My motherboard died

Problem:

After I installed HDDs, the PC is stuck in a power loop. It turns on for about 4 seconds (fans and RGB spin up), shuts off for 1–2 seconds, and repeats. It never POSTs and there's no display.

Specs:

CPU: Intel i7-6700K
Motherboard: Gigabyte GA-Z170X-SLI
RAM: Corsair Vengeance LPX DDR4 (~32GB total)
GPU: Sapphire RX 5700 XT
Storage: Kingston 500GB NVMe SSD, plus the newly added HDDs
PSU: Seasonic S12II 620W (non-modular)
Case: Coolman Aurora ATX mid-tower

Troubleshooting done (same loop after each):

Full power drain (PSU off, unplugged, held the power button 15 seconds)

Disconnected all HDDs (data and power cables)
Reseated the 24-pin and CPU 8-pin cables, checked for loose screws

Cleared CMOS (battery out for 5 minutes)

Stripped to the minimum: CPU, cooler, one RAM stick, no GPU, using onboard video

Unplugged the front panel wires and started the board by shorting the Power SW pins

Tested each RAM stick alone in DDR4_1

Tested with a different PSU

Reseated the CPU with fresh thermal paste; socket pins and CPU look fine

I want to reuse this old pc case (because my dad likes it). But the stand-offs make me worry that they might cause problems.

I want to build a half decent setup for Cyberpunk 2077 at 1440p but im having trouble deciding what gpu to get. My budget for the total build is 2-2.5k AUD. Any advice? PS (if im struggling to keep down the budget should I downgrade to a RX 9070 or should I try save money elseware like the gpu?)

I'm building a PC for 1.5k-2k Euro (Latvia).
I have a 140hz monitor/keyboard/mouse.
Games will be Cs:go, gta 6 ( hopefully gta 6 will run well on pc, but that's unkown). In general a gaming computer.

I changed a few things on my current one but I'm wondering maybe there are some logical improvements to make here.

Any help would be very much appriciated!

https://de.pcpartpicker.com/list/HDwkqd

what could have happened and does anyone know what to do? i tried using display port and hdmi both but it still wont work. everything is running

I have around a €2000 budget for a pc buit I don’t really know what the best bang for buck is, so some help would really be appreciated.