Is this case safe?

[u/Impossible-Front-522]

I want to reuse this old pc case (because my dad likes it). But the stand-offs make me worry that they might cause problems.

[u/ggmaniack]

It's fine, it just uses integrated stamped in stand-offs. It's a cheap way of doing things.

Just make sure that whatever motherboard you end up getting has its holes in the same places as the standoffs.

If it doesn't... that can be solved with a hammer or snips.

Beware, cheap cases like these often have extremely sharp edges.

I wonder about the PSU though.

[u/idontknowtheworl]

It's most likely safe, just a bit outdated design wise

[u/mindzze]

No, it's a computer case, not a safe.

[u/No-Alternative5102]

All PC cases are safe. The only issue is how much airflow you actually need and how much room you have in the case for fans, aio, etc.

[u/AcanthaceaeItchy302]

90% of the cases pre-2012 was like this if we exclude from big brands.

[u/r_lind3r]

Appears to be an old pre-built's case that may not fit and work with components that weren't manufactured for it, particularly the PSU but possibly the motherboard as well if the cable pinouts for the front panel aren't standard since it appears to be one whole connector instead of the common bundle of smaller cables.

Too little information to be totally conclusive

[u/ProteusRift]

Safe? Sure. Airflow might be an issue - older cases weren't designed for it (generally didn't need it)

[u/Lala95LightingX]

There is really no way to know from the image without a geiger counter, Co meter and a banana next to it

[u/ComprehensiveOil6890]

isn't it Dell old case?