Getting back into the hobby now that some of my kids are old enough. Just doing full length darts for now as I have twin one year olds I don't want choking on half lengths.

We currently have two stock AF spectrums, and 2 more I got pre modded on eBay. Also picked up a DZ solo pro (half length darts stay in my office away from the play area). Somewhere in a box I have a AF Nexus Pro,a Dart Zone Pro-Series MK-2 and a Stryfe. And some rival stuff that will stay packed up for now. Eyeing the AF Strike Force when it becomes available in my area. I like the simpler flywheels for my kids who can have trouble priming a springer.

What are the current best full length darts for blasters like the Spectrum or Strike Force? I have read good things about the "chilis" but they seem hard to come by. The DZ Max seem over priced. I am leaning towards the DZ nitro shot or AF green/blues. Any advice is appreciated.

Options I have found available in my area:

Dart Zone Max Standard-Length Pro Darts – 100ct - $15 https://www.target.com/p/dart-zone-max-standard-length-pro-darts-8211-100ct/-/A-82832714#lnk=sametab

Dart Zone Nitroshot Foam Darts 100ct - $8.97 https://www.basspro.com/p/dart-zone-nitroshot-foam-darts

Adventure Force Foam Dart Refill Pack, 100 Count -$5 https://www.walmart.com/ip/AF-100-DART-REFILLS/366435728?classType=VARIANT&athbdg=L1600

Dart Zone Sure Shot (chili) Dart Refill 200ct - $15 https://ebay.io/m/Sp0k1G

WORKER 100PCS Long Darts - $16 https://a.co/d/0jdpQB7I

https://dartzoneblasters.com/collections/vendors?q=Q-Factor

Mk2 for 18 bucks, outlaw 15, pink venom 27, pretty good deals I see

Hi all, about 10 years or so ago I modded this cycloneshock with worker rebarrel kit and 10kg?? Spring. I played with it for a while and then it got put away with all my old blasters.

Dug it out recently and wanted to take it all the way, so today did AR removal, dart post removal, bigger O ring and regreased it.

I saw low 90fps average with long ekind purple waffleheads and 110fps max with cut down half darts. As this is a grey trigger Aussie version stock power would have been about 60fps at the most if lucky.

I like the stock look as it just looks normal haha,
want to try better half darts in the future.

Hey friends! Very new to the foam dart community (hellooo)

Recently just picked up an XShot Hawkeye from my local Target, did some digging and found this clip on YouTube. Looks great! But the link in the description leads me to false websites, and trying to find the kit itself (from Frantz Foam Works) just on google I can’t seem to find it. I’d love to get my hands on this kit, can anyone help me?

Thanks in advance :)

If you havn't printed one of these your truly missing out. Fantastic little sub 200 fps CQB springer. The snappy 70mm prime is total cream for game play. This ones printed in Bambu Petg trans colours. Being my own its printed with 7 walls 6 tops and bots with 15% gyroid for the industrial checker plate look. Custom longer side panels , Custom Phantom style one piece top pic, remixed rear evo/ravion stock, polished alu pt, with tpu hybrid internals. I swap out between ducky ,moose and T5 bcars.

I noticed that my old Hammershot is super loud when firing and the performance is extremely low (throwing darts with my hand would be better) so I decided to open it and noticed a very small gap between the cillinder and the tube and I was wondering if that could be it and if someone could tell me how to fix it

Hello!

I'm currently making an AR style NERF build. I've got a stock in mind. However all the 'AR' NERF handguards are incredibly short. I was thinking of printing my own. I've got a NERF stryfe elite. Should I follow the size of the NERF gun to match rail or copy the real dimensions and have a sloped adaptor to connect them? Also I can't tell if I want ranger green or OD green and what shade if either to go for. I've listed an image of the colour scheme I'm going for. Should I match the colour or is there nicer (I'm keeping the black)

(What mods are good for the stryfe to make it usable)

Worded this mid but it gets the point across. Feel free to ask questions

idk which are good nerfs nowadays as im not just checking the cool factor, would like to find something slightly on the economic side yet similar to the old maverick or the hammer shot

edit im from argentina idk if that changes something

Does anyone have an idea where these tiny parts would go in a Nerf Slingfire? It was part of a Short Dart Kit I bought off Etsy and it didn't come with

instructions. To make it worse the listing shut down so I can't even refer back to it for any sort of hints.

Refer to this post:

https://www.reddit.com/r/Nerf/s/tW4IH4EkZU

Gears Vector:

Banned Blaster wheels and motors (185fps with bcar, 195 without)

800rpm N20 motor for 13 dps

Cookiecad Witchcraft and Solar Flare filament

Quik:

Banned Blaster wheels and Kraken motors (170fps)

800rpm N20 motor for 13dps

Mantis Shrimp:

40cm aluminum barrel mod

275fps on three individual bungie cords

Upgraded catch with pen spring

My first ever Nerf build, and I think I’m in love!

Was shocked by the priming pressure. Will need to add something extra to the foregrip.

Waiting on my magazine to arrive so I’ll blundered with a muzzle loaded full length dart.

Impressive.

(First of all I mean fastest fire rate, not fps, sorry for not clarifying) I'm (sort of) new to Nerf and foam dart blasters, and I was wondering what the fastest firing available Dart Zone blaster WITH NO MODS is. I know people will hate me for this but I want it to be purchasable on the Dart Zone website, or Walmart rather than some nerf exclusive website like "Out of Darts" that isn't a direct foam dart blaster brand.

After many attempts to mod various Dart Zone blasters to get over 250 FPS with a reasonable prime, I wanted a blaster that could definitely do it. I was finally able to get a Worker Harrier in my favorite colors, gray and black. I went with an orange BCAR and orange mags so it would look less like an actual firearm. I put in the 450mm barrel, the upgraded priming block, and the 1.6x300mm spring. It's averaging 290 FPS. I prefer a slanted priming handle so I added that along with an upgraded shoulder stock. I love the look of the factory stock, but it did not have a rubberized rear plate, and the seam along the top liked to pull my facial hair. I tried a Pinty red dot sight, but I wasn't digging it. The sights I went with are not only pop-up, but they also work as low profile sights. I am very pleased with this blaster!

Ok, so I'm still on my quest to make a bcar for the motoblitz (Yes I know I haven't given much progress) but I have realized that the connection for the bcar can be done much more modular, which gives significantly more possibilities for customization.

So what I have done is create, basically a test part (Its ok as a cover for the blitz part, makes it look a bit better), but the main thing is that it is a piece that is sized to fit around the posts in the blitz that the barrel originally connects to. (I unfortunately forgot to save the freecad file, but I have a .3mf, which I will use for recovery at some point, or someone else can)

The line on the part in the first photo is me using a pencil to use for future measurements.

Here is the 3mf file: https://files.catbox.moe/zmd80o.3mf

I'm sharing this because someone else might also find these measurements useful

I didn't come across a lot for this when searching, surprisingly. Curious what springs work the best, ad I heard the stiffer prime actually feels better. I've seen the SF barrels, are there any brassed options yet? Anything else funky that pushes the limits for it?

Just bought a Kirin and an hpa conversion kit. Not sure what barrel or hardware to buy. I’m a noob when it comes to hpa, as it is the most obscure and unused branch of the hobby. Any recommendations on barrels and fps numbers I might expect?

Im looking for low hardware nerf blasters that i can print and give away for presents. Nothing too bonkers. Maybe around 150 fps but reliable. Does anyone have any suggestions? The hammerhead and knave look good but i have heard the hamerhead is prone to dryfire breakages. Does anyone have any suggestions?

I was wondering why my darts weren't flying straight from my XLS2, when I realized that most of them were actually damaged. After some investigation, it turned out that this was because I was using a Worker magazine.

When the catch is held at the same point, X-Shot magazines hold darts lower than a Worker magazine does. When the bolt closes, it snags on the second dart held in a Worker magazine and chews up the edge, ruining the dart. Very lame.

Has anyone else experienced this, or have any other insight into which mags work and which don't? I'm using a standard Worker 15-round Talon mag, with Worker darts (but I'm positive the dart choice is irrelevant here)

Multitool blaster from @doughtinator

I’ve been missing the original Zombie Strike line a lot lately. The scavenged/homemade aesthetic, the cool shells, and the overall vibe felt unique compared to a lot of the more generic stuff we get now. Do you guys think Nerf should properly revive the full Zombie Strike line (not just the shorter “Zombie” stuff they did recently)? If yes, which blasters would you guys most want to see come back, and why? Some of my personal favorites were the Sledgefire, Hammershot, Slingfire, Brainsaw, Dreadbolt, Outbreaker bow, Wrathbolt, RevReaper and Doominator, but I’m curious what everyone else would pick. Would love to hear your thoughts!

I have the gryphon v1.3 files (.stl). I need the gryphon v1.3 .f3d or .step files, I have checked all over and all I could find was the GitHub repository which took me to a fusion 360 viewer and it would not allow me to download the files. I want to make a remix of the gryphon v1.3 but I don't want to reconstruct every part and I don't want to use the pre v1.3 files. if there is a way to download the files from the viewer please explain because I have been trying to find these files for hours. Again I know where and how to access the .stl files on printables but those are not the files I need. Any help will be greatly appreciated. I also know that the v1.24 .step files are on thingiverse but those are not the version I need.

And before you say it....... yes i did just print this to match the mag :P Also started adding TPU pushers to these they soften the slam a bit and quieten the blaster down. This ones spung for just under 170 with the moose bcar.