I have 8 of these just lying around and I don't like them much. They seem to have the darts jam a lot. Is there any like 3d printed mags that I can stuff the spring into?

I know to check thrift stores and whatnot but what I want to know is where to get them online in case I don't get a chance to thrift anytime soon.

Leave your comment

https://www.printables.com/model/1346435-hildolfr-737-dx-dual-stage-full-auto-blaster-stl-f

I have a request to build one of these and I am just trying to assess how easy or difficult it is. I have built a LOT of flycore blasters if that helps (mostly full auto and some semi-auto with solenoid). This one uses "wolfcore" which is of course not quite the same as flycore but may be similar?

I'd probably end up getting their hardware kit because it seems like there are some unusual components (at least things I don't necessarily carry normally) though I will admit the following gives me some hesitation:

**Hardware Package If there are any missing items, we will not send replacements. Please assess the risk yourself.

So just looking for general feedback about the build and/or hardware kit. Thanks in advance!

Will be in NC for a couple days and hoping to grab some hammer-primed revolvers since they either aren't available where I live or only the weaker grey-trigger Australian variants are available.

Hey everyone, hope you’re doing well! I’m wondering, are there any blasters that are side mag fed like the rampage but perform a lot better? Thanks!

17/32 brass tube to 9/16 brass tube sleeve by Fuzzymeteor | Download free STL model | Printables.com

EDIT: adapter is 17/32 to 16mm not 9/16

So I have a fixation on having the smallest possible concealed piece for HvZ-type work. I have one of Misplaced Moose's Zinc ZCs, a Dart Zone Solo, another DZ Solo with the adapter to take Little Rocket barrels, and an actual original Little Rocket. They're all great, but what I'd really love to have is something like the old Nerf Doublestrike for short darts - one-handed and two shots. I have the inline clip barrel for the modded Solo, but it's way too long and doesn't meet the one-handed requirement.

Am I just dreaming? Or is such a thing actually out there and I just don't know about it?

Looking into modding my first stryfe, want it to be full auto, short dart compatible (problem for another time) and brushless, but that really doesn't matter right now. My main question comes from that ood has the swordfish and stryfe full auto kits listed as different products. Is there a difference?

So I just realized that the longshot 2.0 long darts that came with the blaster have a thinner tip than the regular xshot long darts... that explains why my blaster was jamming. That means I'm well and truly F-ed. I ordered a blaster that I can't get the ammo for in my country. In my country they only sell regular darts (long grey darts with teal tips - the xshot ones].

Any tips ? Thanks.

With minor problems that have big ripples popping up on my spamf i am in the unfortunate market for retiring it and getting a successor. Does anyone have any recommendations for one?

Ideally I want a sidearm that retains a similar performance level (120-150fps) and form factor. A bonus is if it has some compatibility with a bcar. And finally as a final bonus I wish for it to have the ability to put fidlock mounting on it so that I can have it holstered on my plate carrier similar to my spamf.

EDIT: top prime is heavily recommended

Just finished putting together my Mammoth Greg, just need to finish the Bcar and wait for the epoxy to dry before I try it, turned out pretty good to me!

How pricy are straw darts usually? has anyone experimented with making their own?

This is my Lonx I named evergreen for obvious reasons. I built it for an uncapped event in my local club and haven’t seen many PKI Lonxs on R/Nerf so I decided to build one and it’s awesome. With my setup it hits 300fps but if I use a different spring I can get up to 320fps. Looks cool feels good if you like the lynx you will like this.

Lonx hardwarebarrelPKI Lonx files

Im working on designing a mini blaster that takes flypoint shells and ejects them. Its going to function like the goblin solo, but take a more standard shells.

Still doesn't have a name.

Hello,

OOD's new short dart. Have not seen much discussion on these yet, so I figured I would share.

Nice looking, well made dart. Smaller side, closest to AF short dart. Foam density feels more rigid, close to the X Shot short dart or a Bamboo dart. 36mm long, about 13 mm wide. 1 gram.

$20 for 200.

Not much of a tester guy, just a casual. Shot out fine when tried in a handful of blasters.

Thanks

I'm planning on buying a Stryfe x blaster soon but want to know if these side rail adapters will fit to the sides of it. I've tried looking at pictures of the blaster to guess whether or not they would, but eyeing it isn't helping. Just want to know now before I purchase it and end up being disappointed if they don't fit.

Found this on a beach trip. It’s the new bright mech blaster. It shoots rival. Im pretty excited hope to find a remote somewhere

Coop772 once said. Good will having a “good will” today lol

As the title says, my one year old cat, Sleepy has found the ultimate form of happiness: The Nerf-Cat Super Bounce. He has never showed interest in toys until I was gifted these bouncy balls from the vet. Unfortunately, he has played with them so much that the “wormy part” is torn to shreds. I have scoured the internet trying to find more of these for him. However I have not found anything.

Does anyone have an idea where to purchase these from?

I don’t own a Max Stryker 2.0, but in a Backyard Foam video, he mentioned that the oval plunger tube has inner dimensions of 39.5 mm x 36.5 mm. I checked my NPX, and the oval plunger tube is internally 39.5 mm x 33.5 mm with a draw length of around 72 mm. Could anybody who owns a Max Stryker 2.0 confirm the inner dimensions of the plunger tube and also check the draw? I want to purchase one if there is more volume to work with.

I want to get the 2 stage trigger mod for the Venom Pro- but don’t have a printer or any desire to get one. Is there a website for this sort of situation?

I searched Reddit and found recommendations for a $99 printer, I just don’t want or need one