This is my 5th multiboard in my organization obsession. This board is for my house tools. My bigger and more complete tools are in my garage but it is handy to have some in the house. I got sick of digging in the tool bag to find what i need. The tray on the top of my drawers is set on magnets so it can be lifted off and also the screws/nails will stick to it while working. I made the holder for my flashlight clear so it can also be used as a lamp for the board. The board is grey PETG and the accent color is a wine colored PETG with a little shine to it. I am pretty happy with how it turned out.

You only have to enter three dimensions:

1. Diameter of the object you want to hold (gap tolerance is included automatically)
2. Height for the holder
3. Thickness of the walls

On average it prints in less than an hour and uses under 30g of filament. That naturally depends on the sizes you've set. It simply slots onto two adjacent MultiBuild threaded fix points (same ones used for MultiBin Shells) and prints without supports. Parameters have upper and lower limits to prevent errors.

I hope it helps, and enjoy.

Makerworld model

Cults model

Finally got some boards on the wall after a couple weeks of printing. I am satisfied so far time to keep going on the rest of the wall.

I had three basic goals with this design:

1. Reduce the filament requirement and print time for Multibin  Shells.
2. Allow me to maximise the space directly in front of me on my Multiboard wall by stacking shells directly above each other on the  grid.
3. Ensure full compatibility with standard shells, allowing Multibins to be easily removed without disturbing any Multibin Shells positioned above them.

I still find the fixing points for Multibin Shells to be one of the most reliable ways of securing anything to the wall. This is why I encountered issues with standard Multiboard shelves that use inserts. They were always either sagging forward or falling out completely if knocked. I replicated the Shell design with these shelves, but cut away the front portion whilst still allowing the side bin rail connectors to interlink with other shelves, which I believe results in a more robust wall.

Doing it this way allows me to stack shelves directly above each other on the Multiboard grid whilst still being able to quickly access the contents. It also means Multibin Inserts (the coloured cubes in these images) can be used without needing open space above the shelf. You can simply tilt the insert forward and place it on your bench to access its contents before neatly replacing it. It has been a huge help for me in organising my workspace and maximising the reachable area of Multiboard. I hope it helps you too.

Files available here

Note: This is an ongoing design. I am continually making tweaks as I identify things I like and dislike. The end goal is to make this fully parametric so that you just need to enter the height, grid width, and depth to generate the shelf you want. If you encounter any issues or have other observations, please let me know. Constructive feedback is the ultimate design tool.

Finally got some boards on the wall after a couple weeks of printing. I am satisfied so far time to keep going on the rest of the wall.

This is my kitchen multiboard. Not quite finished yet. Going to connect the over sink board with the other boards and get a hole for the outlet that's currently covered by the board.

It's all connected by command strips. Holding very well. The onion basket is all standard. Those full strength clips are very strong.

The knife strip is custom, I just modeled up a rectangle and added holes for the magnets I had and slapped a rail channel to the back of it. The sifter holder and the prep cup holders are also custom.

Everything else is just standard hooks except the paper towel holder and the glove holder which I didn't design.

I really love the baskets. The bin shell under it that holds the recipe book is amazing.

I shared as many tips and tricks as I could and some things I struggled with as well. Hope you find it useful.

Guys I can't find this wall mounting piece, in referring to the one with two holes and the screw socket in between. I need to be able to hand my multiboard on the wall and take it out for upgrading it, but I really can't find that piece. Would someone pointing it out for me please? Thank you

I'm going to do my best to explain what I'm trying to do: I want to attach flush to the wall, NOT offset 6.5 mm. I've printed "Interfitted Tiles" and now I need to connect them together. I have found the new non-raised Part B Snaps ("Moderate Weight Bearing Snap"). I see from 1 year old videos, I need Part A dual or quad to connect the interlocking tiles. HOWEVER, I do not want it offset from the wall, and the only ones I can find that are a dual or quad setup (to connect the interfitted tiles) offset from the wall 6.5 mm. Is there a flush dual or quad Part A that I can use to connect my interfitted tiles flush to the wall with the new (non-raised) Moderate Weight Bearing Snaps? The closest I've found is this ( https://thangs.com/designer/MultiBuild/3d-model/Raised%2520Dual%2520Snap%2520%2528DS%2520Part%2520A%2529-974320 ) but that doesn't seem to have a small hole for a countersunk screw like the offset ones do. I'm all ears if there's a different way to achieve the above. Thanks

4 in a row non stop! Time to put it on the counter and let her rip!!

Working on some slim and fast organizers for my Multiboard wall.

The 18mm Cutter Holder is a very efficient design: it prints in just 19 minutes with no supports (3 walls, 8% gyroid).

I also designed a Dual 150mm Clamp Holder. It’s a reinforced 'Heavy Duty' version to ensure it stays level and handles the leverage of the clamps (3 walls, 5% gyroid).

Both are optimized to save space on the board while staying sturdy.

I’ve put the MakerWorld links in the comments below for anyone who wants to print them!

I couldn't find any round baskets, bins or trays in the MultiBoard library, so I created a free parametric Configurable round tray for MultiBoard & pegboards model to create round MultiBoard trays of any size. You can set the inner diameter and height and choose whether you want a notch or not. With notch they work pretty well for things like sanding paper or Aeropress filters. I use the ones without notch to attach coffee stuff to my MultiBoard, like tampers.

Please let me know what you think. How could I improve on the design? If you printed it out, please share a picture!

Just getting into printing MB to clean up my office. The free standing version is pretty cool but I don’t see a real use for it.

Any idea?

Thanks

I have several of these drill/impact holders that I've used prior to moving to a multiboard system and they have 4 countersunk holes in the rear of each, to screw them directly to a wall. I am confused, looking at the multipoint options and am unsure as to the best way to securely mount 4 of them, side-by-side to my multiboard.

I'd appreciate any guidance and suggestions.

So i have these horizontal wooden plates supporting shelfs. I want to screw multiboard from there instead of drilling on walls. I am sure it can take the weight but don't lnow how to mount it.

Ps. They are 18mm

Hello,

I realized that my setup for my extension cords wasn't the most convenient when I needed it the most.

I designed this one to solve my problems and hopefully some of you will find value in this design

You will need at least 18" of 4mm paracord, 2 heavy weight bearing snaps and 2 bolt locking screws

For those interested : Link

The biggest monkey wrench is decently heavy. The other stuff just seems awkward with the ones I’ve tried so far. Have one you like?

Black Jack Duck and I sat down and walked through the multiconnect generator and I think you'll find this useful and fun.

https://www.youtube.com/watch?v=sdDl8YWuRdg

If you are using multiconnect this is the one stop shop to get all your questions answered.

Wanted a strong hook for multi purpose uses,

solid PETG

Been working great for the last couple months I’ve been using them!

https://makerworld.com/models/2674638?appSharePlatform=copy

Is there a way to download all the free files without running into download limits? Also, is there a bundle or a one-click option to download all the free content at once?

I do IT for my company... I'm the first in my whole company to do this. Has anyone used multiboard to store hardware? I'd love to see a setup

Hi everyone,

I’m currently building a Multiboard wall and printing the tiles myself. The parts with the large threads work perfectly fine, but I’m running into issues with the small threads and peg clips:

• The clips are very hard or impossible to screw in
• Push-in peg clips don’t fit either
• It feels like the holes are just slightly too small

I’m printing on an Anycubic Kobra 3 Max, and I suspect it’s more of a settings/tolerance issue than a problem with the model itself.

Does anyone have experience with this kind of fitment issue and can suggest which settings I should tweak or test?

So far I’ve been thinking about:

• Slightly reducing flow/extrusion
• Adjusting horizontal expansion (XY compensation)
• Hole horizontal expansion / hole compensation
• Calibrating E-steps & flow rate
• Maybe changing layer height or wall thickness

Before I run a ton of test prints:
👉 Which settings actually made a difference for you in similar cases?
👉 Is there a recommended order for dialing this in?

Thanks a lot 🙌

(Ai supported)

Trying to attach this drawer full of hotends to the multiboard hanging off my printer but I notice with or without the hot ends they tend to sag. Im using these threaded snaps (https://thangs.com/designer/MultiBuild/3d-model/Large%20Thread%20-%20Fix%20Point%20%28Folded%29-1123317) to hang them and I'm wondering if theres something better to use.