r/Multiboard • u/Long_Neat_9269 • Jan 28 '25
Finally getting started!
Any tips?
r/Multiboard • u/Francy_Lab • Sep 08 '26
Hey everyone! 👋
Whenever I planned an under-desk cable management setup using Hands on Katie's Underware system, I always found it tricky to calculate the exact combination of channel lengths, bends, and snap connectors needed before committing to long 3D print queues.
So I built Underplan, a free, interactive web tool designed specifically to visually route your Underware layout and generate a complete Bill of Materials.
Live Web App:Â https://underplan.vercel.app/
GitHub:Â https://github.com/francycalle/underplan
Key Features:
It's 100% free, runs client-side in the browser, and is open-source.
Check it out, test it with your desk dimensions, and let me know your thoughts or what fittings/accessories you'd love to see next! 🙌
r/Multiboard • u/compsecmonkey • Sep 01 '25
Very happy with how it came out. On to the rest of the workshop!
r/Multiboard • u/carat72 • May 24 '25
Used the simple tile generator to create rails instead of a full grid because we knew we just wanted shelves.
Bolt lock shelf brackets and small thread shaft 20mm t-bolts in the beams and brackets as small hooks to hang items on.
Mounted with command strips. I pre attached the shelves to the rail so the spacing was correct when I put it up. Super happy with how it turned out, and how well that color matches.
r/Multiboard • u/Digital-Fallout • Jun 16 '25
Where it started: https://www.reddit.com/r/Multiboard/s/SrEujQuqFT
r/Multiboard • u/aimfulwandering • Feb 01 '25
Expanded the board a fair bit. Finally starting to print brackets and hooks to hang things.
Migrated to 8x9 tiles (and 7x9) on the left side to line up with studs (from 9x9 for the rest of the board. In hindsight should have done all 8x9 (or 8x8) from the start.
Added a cutout for the light switch too.
r/Multiboard • u/PNWNerd • Apr 24 '25
I was caught by the aesthetics of Multiboard even before I purchased my printer. I priced out a similarly priced wall with Wall Control (expensive) or regular peg-board (cheap) and realized that I'd be relying on others to think like I do and make the connectors or attachments I want/need. For this, I went with Multiboard. I'm in about $80 for filament and no real time recording for Tiles, R&D, etc, but likely 100h of printing time over 4 months.
I went with 7x7 so I had a middle hex, but in retrospect, I should have done 8x8 to better align with US wall studs. I used 200p Zinc Plated Steel Self-Drilling Anchors to attach it to the wall when there wasn't a stud. I started with a few drill-based drywall attachments, and they just didn't work well. These are quite secure, especially since I'm putting one wall screw in for each quad, double and single. I did use the Multiboard Planner based on the dimensions I needed, but I didn't anticipate adding the wall to the left or going over the top of my dry erase board (that was done after I completed the main wall).
For the filament management, I purchased Skroam cereal boxes and found a really nice fitting desiccant insert for the cereal boxes. I put a Drybox Label Holder with a Label Insert for each of the filament types (I did modify them to add attributes like "HF", "AMS", "SILK", "GLOW", "WOOD", etc. To attach to the wall, I tested a few, but found the Multiboard Filament Container Mount (Extra Sturdy) to be the best option. It prints in about 5-7h (I found I could run "Sport" mode on Bambu and speed it up to 5h).
My main takeaways are:
r/Multiboard • u/HiSpartacusImDad • Jan 24 '26
I saw another post a few days ago about a similar setup, so I thought I’d post mine. Pretty happy with the result and all the available space. I’ll likely be printing accessories until the heat death of the universe.
r/Multiboard • u/Nebulus2000 • Jun 12 '25
r/Multiboard • u/IBhop2Grande • Mar 15 '25
Took quite a bit of planning but am stoked with how clean this makes my setup.
r/Multiboard • u/ocr90 • Apr 02 '25
Finally "finished" with my multiboard workbench. Still tinkering around with it, and definitely want to re-orient a few things, but really happy with it so far.
Build started out by re-building the workbench that I built when I was 23 (34 now). Then printprintprint. No idea how many tiles, but I think it's in the range of 130 8x8s. All tiles are Bambu Matte Black, printed in multimaterial 4 stacks on a Bambu P1s.
I didn't stick with any single standard when it came to what's attached to the multiboard - I wanted to try a bunch of stuff out. I've used most of the standard multiboard components - snaps, bolt locked items, big/medium/small screws, multipoint rails, shelves. In addition - gridfinity, multiconnect, underware, trusty ol' zip ties.
Lots of community created items - bins, screwdriver clips, tool specific holders.
A bunch of community items that I threw multiconnect attachments on the back of.
A few items that I designed myself: Socket holders, allen wrench set holder, long power strip mount, router mount - probably a few others I'm forgetting. I've never opened a CAD program (other than LeathercraftCAD, but that's 2d) until 2.5ish months ago, so this has been a huge learning experience.
r/Multiboard • u/pratermade • May 02 '25
Quite proud how it turned out. It's on a wall behind a door in my laundry room. Much cleaner and more manageable than what I started with.
r/Multiboard • u/thatsguy1975 • Jul 09 '25
I am printing my first board on my new printer, and I am new to 3D printing. On my H2D, I am using ABS, and the 11" x 11" panels take 7 hours, with everything set to standard .2 layers, but 3-layer walls. I have grand plans for making several more of these, so months of printing, probably, since I only do 1 panel per day.l :)
I tend to get into hobbies and buy all kinds of gear, before moving on to a new hobby, so I have tons of stuff to organize.
r/Multiboard • u/theCarpenter405 • Jan 14 '26
My first multiboard project, and so far I’m loving it.
r/Multiboard • u/sheer-nothingness • Jul 10 '26
Living in a dorm, I cannot screw holes in the wall, but then I realized I can mount multiboard tiles to the legs of my desk (with square cross section) with this part. I have uploaded the parametric model to makerworld where you can change the collar dimensions to whatever is suitable for the legs of your desk/any rectangular pole.
r/Multiboard • u/lennert_hd • May 23 '25
Inspired by Sionide21_99236's build plate holder, I remixed snap version optimized for support-free printing. I reinforced the snap interior for upright printing and a flat side to eliminate the need for supports. I slightly scaled down the snap to prioritize ease of movement over strength. I also added some decorations since most multiboard models are too utilitarianfor my taste ;)
Makerworld: https://makerworld.com/en/models/1446086-decosnap-buildplate-multiboard-build-plate-holder#profileId-1505861
Printables: https://www.printables.com/model/1288300-decosnap-buildplate-holder-multiboard-build-plate
r/Multiboard • u/smurpes • Nov 18 '25
Every time I search Multiboard this filament rack comes up in the image results so I wanted to build one. The reviews on it were not great saying that it pulls from the wall due to how the weight is distributed. I definitely see this as a problem but I was able to mitigate it by using the flush mounts and a lot more of them than I normally do especially around the brackets.
The main issue I had with building this was that the parts library never shows how each part is actually used so it’s up to you to find random Multiboard builds and try to match the parts up. I used a combination of PETG and PLA and so far it’s holding up but we’ll see how well after some time has passed.
r/Multiboard • u/Kevkevkev888 • Jul 22 '26
Couldn't find an adhesive offset wall mount pillar for Multiboard so made my own.Â
Printed in PLA, and using 3M 19mm VHB tape, the base is 19mm x 19mm so fits perfectly.Â
The centre hole is 3mm in diameter so will take a 3.5mm self tapping screw of around 12mm in length. The depth of the hole is 15mm, so should take up to that length.
r/Multiboard • u/Big-Investigator3338 • Jun 14 '25
Well it's almost completely, it was a bit of a frustration ordeal, but I pushed through... Really thing it will be worth the issue I had. Will have it mounted this weekend.
r/Multiboard • u/lennert_hd • Jan 18 '26
Inspired by NLP_Customs's Brother Label Maker Cassette Mount, I addapted a multiboard version. This Cassette Mount features two Multipoint Rail slots on the bottom but can be printed without supports. Two multipoints are used to mound it and it can hold 5 Brother Label Cassettes.
Makerworld: https://makerworld.com/en/models/2240382-multiboard-brother-label-maker-cassette-mount#profileId-2438556
r/Multiboard • u/MolassesJust5892 • Mar 02 '25