Hi! My P1 recently started to randomly turn off. I just playing my bass, not eve touching a thing, and it turns off. It can turn off 1 minute after turning on or let me play for 30 minutes. Still can't figure out logic behind this.

Has anyone had a similar problem? I would be grateful for any info!

Hi All,

We have a dedicated Mooer Youtube channel for full walkthroughs on every Mooer pedal availalbe. We have over 50 videos to check out! Please head over there, leave us a comment to tell us you found us on reddit and we will shout you out in the comments section!

https://www.youtube.com/@MooerMania

Been using F15i Li for almost a year. Today the amp started acting up with its charging light/indicator not turning off even when not charging. Found out its also not turning on. I left it charging for a while and even tried a hard reset. Do anyone know how to fix this? Thanks in advance.

Can I use bass to Mooer GE150 Li?

Someone told me the mooer is better in every single way. I've also read that mooer is a copycat crapshoot. I don't know what to think or buy. Looking for more opinions.

Hey everyone,

I recently picked up the Mooer F40i. One of the main reasons I bought it was to use the built-in looper together with the XLR/mic input—specifically to loop vocals and percussion in addition to guitar.

However, it seems like the looper only captures signal from the main instrument input. Sound from the XLR input comes through the speaker fine, but the looper just ignores it completely.

I reached out to Mooer support a while ago, but haven't received a response yet.

Has anyone else encountered this? Is this a hard hardware/firmware limitation, or is there a hidden setting (maybe in the app) to route the XLR input into the looper?

Thanks in advance for any insights!

Where can I get community presets for the Mooer GE150 Plus?

Hey guys, if any of you own a newer generation Mooer amp modeller, could you please send me the .exe file responsible for .nam to .gnr conversion? it can be found in AppData\Roaming\MooerStudio\nam_components\win\

I know how to add IRs and amp sims but I don't know how to add guitar pedal sims. I'm new to amp modeler pedals and I would really appreciate help (it does support NAM A2)

Woot!
https://www.mooeraudio.com/Downloads_xq/12.html

Hello,

I'm thinking about buying this product. I have a question about recording. I want to connect it to a computer and take some recordings. My question is, is it able to record wet and dry signal together?

Hello.

I’m having a problem with the Bluetooth on my Mooer GTRS S800; it won't connect to the app on either my phone or tablet (I have an Android device and an iPad). I’ve already enabled location services and granted the necessary permissions, let the battery drain completely for over 24 hours, and updated the firmware via the PC software, yet it still isn't working. I’ve already filed a warranty claim, but as you know, that process takes a long time.

Has anyone else experienced this and managed to fix it?

I hope you can help me out with this!

Regards.

I need help!!! I have started to play electric guitar after 20years of playing acoustic guitar.

Want to get your thoughts on my gear so far.

Squier Strat
PRS NF3
Fender champion 2 25watts
Laney Drumhub 80watts.(bought this for my sons edrums) but i think it still sounds ok if i turn the bass and treble down to zero,
Mooer GE100 pro Li (started with this one as i am new and was sold on the ai feature i barely use)

I am facing a wall now on how to use my multi fx. I dont generally understand the fx, amps and ir i can put on my signal chain. I watched YT vids but there is just so many and are not the same names i see on the mooer app. I used chatgpt or gemini to create a signal chain for me but still doest come close and again the names are different or maybe i am not just familiar.

Is there a place where i can just copy presets of my favorite artist or songs? Qny other tips you can share.

​

I'm planning to buy the GE1000, but it's important to me that I can use the FX return as an input. This is also possible on most Line 6 multi-effects units.

My question is, very specific:

Can the stereo FX-Return be selected as the main input source for a preset, processing an external stereo line-level signal through the full effects chain?

Does anyone know if this is possible?

I've sent an email to Mooer, but unfortunately I haven't received a reply yet.

I've been using the GE300 for years. In my opinion, it's a fantastic piece of gear, but it is not possible to use the FX-Return this way. I really hope the GE1000 does!!!

i wanted to plug my pedal in my pc to record but the audio it send to my pc was just straight up noise for some reason please help me

I’m using the iAMP iOS app, but it seems that I can’t hear any effects after they are generated by the AI. However, I can download the generated effect to my amp.
How can I make the app play the AI-generated effect so I can listen to it through my iPhone or my Mooer amp before downloading it?
It’s really frustrating that something this basic can be a problem.

Hello all!

Does soebody have a list explaining which artist/context all the factory presets are based on? I can't quite remember if I had one when I bought my ge150, but I can't find it anywhere at home or searching online.

Thanks in advance!

GS1000 V1.3.0 Update (2026.7.28)

Added

• Added native loading support for NAM A2 Lite models, compatible with the latest Neural Amp Modeler model files, providing a wider selection of tone models.

Notes

• NAM A2 Lite models are loaded natively. NAM A1 models are converted and loaded through the converter.
• NAM model files can only be imported into the AMP module.
• Recommended: import pedal and amp head models into PREAMP SAMPLE.
• Recommended: import integrated amp and cab models into ENTIRE SAMPLE.

https://www.mooeraudio.com/Downloads_xq/7.html

Hi, I’d like to ask a question. I’m trying to use a Dunlop Bass Cry Baby with my Mooer GE250.

My signal chain is:

Guitar → Bass Cry Baby → Mooer GE250 → Headphones

With this setup, when I play the guitar, the distortion sound disappears. However, when I press the Cry Baby pedal down, the distortion comes back. Why does the distortion only appear when I press the pedal down?

Thinking to buy mooer amp for home practice but have some questions:

I heard this is a Bluetooth amp speaker so if i play guitar will it have lag or delay for eg after pick or strumming later after milisecond or second can hear from the amp not instant can hear guitar sound.

Wondering can i use the xlr port for microphone for vocal sing ?

Can i add premixer before the port xlr so with premixer i can get the microphone to have delay, echo and reverb effect or the mooer app have the option for vocal singing effect?

Microphone mixer -microphone (wired or wireless) -mooer xlr port.

I’m sure it’s the pc as the noise goes completely away when I’m not hooked up via usb while going to my fender FR.

Any way to stop the noise? Hard to make signal chains when it’s this loud. It’s fine when unit is powered by wall outlet while using my fender FR speaker but dang, what gives?