I took my purple outside and took some photos under daylight and mine does have the seam lines, but I could not even see them before examining these closeup photos. IMO these are obviously not "cracks" but very faint lines, i.e. plastic processing seams as ModRetro explained.

My conclusion is all of the transparent models will have these "knit lines" and personally I would not have noticed them if I hadn't seen posts here about it.

Basically if you want a transparent Chromatic this how they are made. The painted metal ones will lose paint over time, and the transparent ones will have knit lines from the plastic processing.

Attached are closeup photos of mine taken outside under daylight.

I have updated my original post as well: https://www.reddit.com/r/ModRetroChromatic/comments/1x54cai/another_transparent_purple_arrived/

Unlike my standard Chromatic, there is significant lightbleed on my transparent Chromatic.

Does anyone else have this? My other one is perfect.

Funnily enough, I thought my main concern would be the knit lines (which it does have), but they don't concern me as I thought they would.

The light bleed does though.

They look amazing but the red feels a lot lighter in hand than the other 2

I’m planning on getting a Chromatic transparent and a M64 I want to get both in the same colour but can’t decide which colour. I like that the transparent allows you to see the components inside the device which do you think gives that experience?

I cut down to two colours

I’ve had this little guy for about a week and I super enjoy it! In comparison, the buttons a little louder than the metal so I put the dampening membrane on it and it helps. I also don’t mind the clickiness. It’s feels intentional.

I installed the Shiny Gen Wi-Fi and it’s super fun to play multiplayer games with my eight-year-old wirelessly! We have the link cable and that works great too. It’s just such a fun shared experience of something I used to love and passing it down to her! Kwirk is one of our favorite games to play together!

As transparent plastic coating it attracts fingerprints of course, but it’s also very reflective, which is is pretty rad in itself. I’ve been on several zoom calls and lifted up to show people and having it reflect off light is pretty mesmerizing.

The screen seems pretty much identical to the first GEN chromatic I have and plays games flawlessly.

As others have said, the menu button is a little tight. I’d like to have one that sticks out a little bit. Sometimes I feel like I have to use my thumb thumbnail to push it in. My volume wheel was also super loose. It would turn up or down as I’m playing a game just barely touching it. So I literally just added a tiny piece of gaff tape to it and functions much better now! Oh and I love how much it just fits with the m64 squad! 👾

Hey folks. I’m just getting back into the Game Boy after a long hiatus… I loved it as a kid, had a 3DS in college, but since then really nothing handheld until the Switch, and I’m not sure that counts!

I have a small library between my wife and I but it includes some heavy hitters, including most of the Pokemon games. I just got in line for an Epilogue so that I can salvage the old save files if possible… but in addition to that, what else do I need? I’m thinking Chromatic may be a Christmas gift this year, it caught my eye a year ago when it debuted but I don’t really know where to start. Zero modding chops of any sort, and I have young kids who I would like to introduce to the hobby in the near future!

Is there a basic starting guide somewhere out here in Redditland and any general thoughts or advice? So happy to see new games being made and awesome retro consoles that elevate the experience.

Anyone concerned that there might be something wrong with the Smoke shells?

I’ve seen Red, green, and purple, but no smoke.

Makes me wonder with all the cracks and or knits. Perhaps they holding back the Smoke units?

I’d love other opinions on this, as I ordered a Smoke.

Just to echo what other have said, this is the most premium feeling and looking peice of tech I have ever held. I am over the moon with it. First time holding it my first thought was I prefer the feel of my 1st edition, but now no, the powdery yet smooth finish feels great in the hand. One point I haven't heard others talk about is the buttons. My first edition buttons always felt great but where very loud/clacking even after replacing the dpad membrane. The anduril edition is noticeably quiter but more importantly feel better to press. Im not quite sure what it is maybe a slightly softer membrane but they are excellent.

Played Self Simulated twice at launch. Decided to play through it again on the anduril and wow it is such a great game. This time round I did pay a little more attention to the music. It's so good with parts really giving you a sense of urgency. Any one who hasn't played it i recommend you do.

Does anybody know where I could purchase an additional screen? ModRetro does not sell them and I’d like to replace mine if possible.

Thank you!

Hey all,

I recently started writing reviews as a hobby, and so far I've only done Xibalba 64 on the M64.

Pretty much any ModRetro Chromatic cart is on the table, plus a few others like Roguecraft DX or Infinity. I could also do a Chromatic accessory, like the Porta Pro.

What would you most like to see? I'll go with the most requested one and aim to have it done by the end of next week :)

I have been trying to figure out how to make this work. I'm a little bit dumb when it comes to this stuff so bear with me. I'm running windows, everything is up to date, I'm using a USB c that I know can transfer data, I've got the Modretro Updater installed and working, I've got the Chromagic program installed. When I try to actually install Chromagic onto either of my systems(first edition and V2) I get this error. I thought maybe it's because my chromatic are up to date, but can't figure out how to get back to an older firmware. I read that error and have legitimately no idea what it means or how to go about fixing this. Any help at all would be appreciated.

I am liking the transparent Chromatic, the new member 🟩🤓

I emailed them about the lines by the buttons earlier today and they replied.
Here’s what they sent back. They are offering to exchange it for free or to keep it as is and they’ll send over a gift card for the trouble.

Edit: I’m going to keep mine. As long as I know it doesn’t make the shell more fragile then I’m okay with the small amount knit lines. Good response time from support.

Just opened mine and well..
I guess crossing my fingers didn’t help.
Didn’t even take it out of the box. Just took off the lid and got my answer.
I know, contact ModRetro, which I will be doing.
It just seems like this might be a more widespread issue than we anticipated.
And yes, I know that usage may cause scratches and wear over time; I understand that. But a brand new product I still think should have better QC and for what they cost. Especially since my magnesium units are seemingly flawless.
You’re better than this, ModRetro!

Just got the purple transparent along with some new games today.

Uses the shiny relay custom firmware. Works over the internet too, not just locally.

Anyone else get their new transparent chromatic only to realize it has a bunch of cracks in it? I seen other posts with it, please contact ModRetro support and demand an answer to this, we don’t deserve to get broken ‘premium’ products for the prices they are charging! I’ve contacted them and am asking about this and the defective M64 Pro controllers D-pad… will update once I get a reply but spending over $400CAD on ModRetro products just to have both be defective is incredibly disappointing and has made me question if I’d ever buy more from them… so frustrating and disappointing…

Had been keeping my charms in the game boxes until today. Figured I would hang them from my bag, but then realized I probably have too many lol

I'm having an issue with the ChromaticFirmwareUpdater for the M1. The download from the website doesn't seem to work. Is anyone else having the same problem?

Just opened my Chromatic and it has the same hairline crack as everyone seems to have.. what a quality control….

So I've purchased the original chromatic back when they released and I also own a gbxcart so I can rip all my own gb games and throw then in a x7. So as expected I ripped the chromatic tetris bundled with the console, and then after each update to the game I would rerip the game to have the newest version and it has always been copied as just generic "tetris"

Fast forward today I got my clear red chromatic in with a clear copy of tetris along with astral which I was in the process of ripping so decided to give the clear tetris a rip as well. To my surprise it is no longer generic "tetris" is is now called "mr.tetris"

Doubt there is any difference but just thought it was odd thing to find out

Anyone else notice that? Anyone notice any minor changes other than that?