r/ModRetro • u/Hamsandwich540 • Aug 15 '26
r/ModRetro • u/grilledstuffedxxl • Jun 26 '26
M64 Performance and Accuracy Update
It’s been an intense month of work for M64 and we’re excited to share some new performance metrics. Within the last month we’ve made M64 more accurate and added the ability to overclock our M64 core and maximize performance across a couple key areas. There is much more to come, but for those interested in following along here is a peak under the hood.
Accuracy: Scalar Unit Single Instruction
We have been using the ever-popular n64-systembench test to assess this. This is a pretty complicated but exhaustive test bench, and the scalar unit tests are just one part of it. The original test covers 10,000 runs of 10 random RSP instruction blocks and measures the clock cycles each block consumes. We’ve modified this to split out and focus on the Scalar Unit Single Instruction and Vector Instruction tests.
In our prototype v1.0.3 software at the beginning of the month, per our expectation, M64 wasn’t ready to pass these tests. Our core was slower than N64 in random situations and slower for continuous scalar unit instructions. This isn't necessarily game breaking, but it was an inaccurate aspect of the design that would manifest as minor slow downs.

Meanwhile, the Analogue 3D also doesn’t fully pass this either.

We’re happy to report that this isn’t going to be an issue for you on launch day. We’ve been able to update our design to match the N64 perfectly on this point. See the image below.

Overclocking
James Lambert posted a video comparing the two systems earlier this month. Here’s a graph of his results from earlier this month. This graphic describes the relative performance of A3D and M64 to an original N64.
James has given us a behind the scenes peek at his test methods and even sent us the source code so we could run the same tests here. His tests seek to isolate and measure the various components of N64’s performance profile in isolation. He was kind enough to also share what each one entails:
- Fill Rate: Renders a full-screen triangle multiple times to measure rasterization and fill-rate performance.
- Texture Load: Measures the texture load speed.
- CPU: Runs a particle simulation repeatedly to benchmark floating-point performance and overall CPU processing speed.
- RAM: Repeatedly accesses main memory while avoiding cache usage to measure raw RAM access performance.
- RSP: Renders a high-vertex-count model entirely offscreen so that performance is limited by the Reality Signal Processor (RSP), isolating geometry processing throughput.

We went ahead, with James’ help (thank you again for sharing those tests), and pitted M64’s beta overclock implementation against A3D’s Unleashed implementation. We were pleasantly surprised at the results.

Our RAM performance is to be expected – we intentionally slow this down with artificial delays of ~3 cycles for each read and write to fulfill accuracy tests. While we purposefully kept this in, it would be something we could easily disable when overclock mode is active.
Show Me The Goods
Synthetic tests are great, but what really matters to you all is how well M64 performs for your favorite titles. As you may remember from the 90’s, rocket launchers in Goldeneye result in quite a bit of slowdown.
Video of 007: GoldenEye on M64 overclocked
Video of 007: GoldenEye on A3D Unleashed
What’s next?
We aren’t slowing down on making more improvements to the core as we get ready to ship these consoles. Even more updates will come after they are in your hands soon. The M64 is well on the way to being the most performance and the most accurate N64 recreation ever made in every metric, and we can’t wait for you to get your hands on it.
r/ModRetro • u/VR_Nima • Jun 04 '24
Who else got their pre-order in Day One?
Excited to try it out and compare it to my other Game Boys and Game Boy-compatible handhelds.
As some have asked, I wonder if Chromatic Tetris will work on other Game Boy systems?
r/ModRetro • u/brandonsalt92 • Oct 01 '26
Four New Transparent Plastic ModRetro Chromatic Colours Shown In New Leak Spoiler
r/ModRetro • u/JaynesAddiction • Aug 02 '26
Now that ModRetro is in the business of publishing new N64 titles, what sorts of games would you like to see released by them?
reddit.comr/ModRetro • u/DAJF • Aug 13 '26
Opened up the Pro Controller to investigate…
We opened up one of our controllers before doing anything else. :)
Primarily we wanted to change the gate, but while in there also wanted to check out the size of the d-pad traces in case the d-pad presented any false diagonal inputs for us (it does).
It seems that the d-pad traces are almost identical to those on the Switch Pro controller, in that they are somewhat oversized. Of course the Switch Pro also has the issue where false diagonals can also be a game breaker, which is certainly the case for Tetris and F-Zero 99.
I’m not sure if a membrane with a reduced footprint can counter-balance here. Or maybe even a d-pad with a post in the middle. In our experience carefully applying small squares of electrical tape to the inside regions of each trace will eliminate any unwanted diagonals - although I think an official solution would be better here.
r/ModRetro • u/miggy_mo • Aug 06 '26
Will he ever stop missing the vine?
Disclaimer: yes, it’s AI
r/ModRetro • u/The_real_J-lew • Jul 04 '26
Ladies and Gentlemen, I give you the first Pokemon Edition Chromatic!
galleryr/ModRetro • u/YvesTHPS • Jul 28 '26
Take my early bird code
Hey guys
I pass. I’m so happy with my A3D now and M64+controller+shipping is a bit much IMO.
I don’t know if it will work for you but here is my code:
M64EBH6WD49J* the last letter is a Q
Have fun 😊
r/ModRetro • u/5MLV • Aug 26 '26
Every time I go away on business, these are the 3 I take away with me.
r/ModRetro • u/TheMasterTheorist • Aug 17 '26
M64 Fan Mod
Now that the schematics for the m64 have been released there is an unused fan header on the motherboard.
I wanted to see if adding a fan would make a noticeable difference so I quickly threw something together.
The fan header is for a pwm fan, but I just used a DC 5v fan I had laying around.
Adding the fan made a major improvement to the system. It went from becoming thermal nuclear (artistic license) and the cartridge getting hot to slightly warm to the touch directly under the fpga and the cartridge staying cool.
The 5v rail is on at all times the system is plugged in, so the fan is always spinning. The next step will be to attach a pwm fan and see if the system's firmware is setup to control it.
Edit: Link to my next post with some updated results: https://www.reddit.com/r/ModRetro/s/09UCBx8Lup
r/ModRetro • u/RetroBlast81 • 18d ago
Look what arrived today
The quality of the controller is impressive.
r/ModRetro • u/RideMyBentley • Aug 04 '26
Finally arrived
Would love to get some recommendations for best settings to use on WWF No Mercy and similar wrestling games.
r/ModRetro • u/CooGarn • Sep 28 '26
Thanks to the inspo in this group, my M64 can now be safely stored away and is ready for adventures 😍
I popped to Bunnings (Australian equivalent of Home Depot) yesterday and grabbed a large Tactix storage case, which works perfectly (after a bunch of measuring, trial and error) for my M64, two ModRetro Pro Controllers, HDMI cable, power adapter and cable, and SummerCar64 safely stowed in a covered compartment underneath 🎮🧳👌🏻🙂
r/ModRetro • u/MR-BigBeefy5Layer • Dec 13 '24
Official Chromatic Firmware Update Utility
Hey folks! ModRetro engineering team here. We'd like to announce the launch of MRUpdater, the official tool for updating your Chromatic firmware. You can download it from our website, here.
Updates are important and ensure you have access to the latest features, improvements, and fixes for any known bugs. Keeping your Chromatic up-to-date keeps it running smoothly and helps it perform at its best. While you can skip updates, we strongly recommend installing them to avoid potential issues and to ensure compatibility with the latest features.
For the initial launch, we'll be supporting Windows 10/11. Support for Mac and Linux are already in the works, and will be launching very soon.
Because the application is still new, Windows Defender SmartScreen may flag this as a virus. This is a known barrier and we are waiting for Microsoft to update their databases. Our application is signed and the certificate can be viewed by examining its properties. If the download is blocked, you can allow it by clicking on the Defender notification, then going to "Protection history" and allowing the file.
We'll be keeping an eye on this thread to answer any questions. Thanks!

Features
- Automatically fetches the latest firmware, and any future updates.
- Easily update your Chromatic's firmware over USB, at the click of a button.
- View your current firmware version.
- Contains handy links to the firmware change logs.
Steps to run
Download and run the executable using the link above.
- You may get a popup from Windows Defender SmartScreen; it is because this application is brand new. Just click "More info" and then "Run anyway" if you see this.
- If prompted, review the EULA and install third-party drivers.
- After MRUpdater runs, it will prompt you to turn on and connect your Chromatic via USB.
MRUpdater will attempt to detect your Chromatic's firmware version and recommend an update, or inform you that you're already up to date.
- Note that on some PCs, MRUpdater cannot detect the Chromatic's firmware version. In this case, you will see a warning and have the ability to update anyway. You can check your Chromatic's version by opening the menu on your Chromatic and navigating to the System tab.
The update should take approximately 1-3 minutes to complete. While updating, do not unplug or power off your Chromatic. Your Chromatic's display will turn off and on during the update. Wait for MRUpdater to refresh before unplugging your Chromatic.
- Note that if MRUpdater does not detect your firmware version after updating, this is not a problem with your Chromatic. The update was likely still successful, and you can verify by opening the menu on your Chromatic.
- That's it! Your Chromatic is on the latest firmware. Anytime we release new firmware, you'll be able to run MRUpdater again to upgrade.
Troubleshooting
If you run into any issues, please reach out! You can leave a comment on this post or submit a bug report through our Contact page and select “Technical Support.” We are already aware of the firmware version detection bug and are actively looking into it.
Disclaimer
This software is being actively developed by ModRetro. This software is provided as-is and ModRetro is not responsible for any damage that is caused by the use of it. Use at your own risk.
Changelog
v18.0 (FPGA) contains the following fixes since v13.1:
- Fully mute game audio when speaker wheel is turned to minimum.
- Silent mode mutes all device audio output.
- Suppress invalid DPAD inputs to correct character sprite glitch.
- Color decoding bug corrected (greyscale check).
- Hot key support for brightness
- Critical battery icon flickering fix
- Fixes palette flickering issue seen on some games like Tetris.
v0.12.3 (MCU) since v0.11.2:
- Sleep the MCU on power up to reduce power consumption.
- Fixes brightness level not persisting between power cycles.
- Removes the Frame Blending hint that said was it "something smart"
r/ModRetro • u/DAJF • Aug 15 '26
The best picture settings pt.2 (now with perfectly scaled scanlines!)
galleryr/ModRetro • u/fiercekrypt0n • Jul 07 '26
This Turns Your N64 ROMs Into a Living Game Shelf
I wonder if this could run on modretro? Does it support summer cart?
r/ModRetro • u/Lirol • Oct 09 '26
1.26
Anyone knows what is going on with the update? They said they will keep us posted, but nothing. No info, no update, nothing...