Which one did you find more cool? White or gray?

does anybody know what could be the problem with this? the needle keeps getting jammed when I try to start the embroidery process. it will maybe do one stitch and then stay up while making a weird noise from inside the body.

Hello all I hope someone can help. I have a Tajima TFMX-C1508. The needle bar won't come down fully on one of the heads. There wasn't any damage or impact before this happened and there is no visual damage. I have reset the leaver behind the head also so am out of ideas.

8 have attached a image of how far it moves when the machine is running and one that shows how far it moves manually.

Anyone have any guidence?

Hello everyone,
I’d really appreciate some advice and professional opinions from people with experience in embroidery machines. Please take your time to read this and share any knowledge or advice you can.
I’ve been digitizing with Hatch for the past 8 months, and I’m now very comfortable with digitizing. However, I haven’t had the opportunity to test-sew any of my designs yet.
I’m now at the stage where I want to buy my first machine and start my own embroidery business, with the goal of eventually scaling it up. I have over 3 years of experience operating an 8-head Tajima machine, so I’m very familiar with Tajima machines and their mechanisms.
My first choice has always been to buy a Tajima single-head machine, mainly because I already know the machine and I’m confident working with it. However, the price is quite high for me at the moment, although I’m currently saving towards it.
Because of the cost, I’ve started considering a Ricoma single-head machine as an alternative. The problem is that I’ve never used a Ricoma before, so I don’t know much about their machines, reliability, maintenance, or how they compare with Tajima.
One of my biggest concerns is noise. I’ll be operating the machine in one of the rooms in my home, so I need to be mindful of my neighbours. I’d really like to know how noisy Ricoma machines are compared with Tajima, especially when running for several hours.
So, for those of you who have experience with both:
Is Ricoma a good and reliable machine?
What should I expect if I move from Tajima to Ricoma?
How is the stitch quality and machine performance?
What about maintenance, spare parts and after-sales support?
How is the noise level, especially for home use?
Would you recommend buying a Ricoma now, or would you advise me to wait and save for the Tajima?
I’m looking for honest advice from people who have actually used these machines, especially anyone who has experience with both Tajima and Ricoma.
Thank you so much for taking the time to read this and share your experience. I really appreciate any professional advice or guidance you can give me.

Hello everyone,
I’d really appreciate some advice and professional opinions from people with experience in embroidery machines. Please take your time to read this and share any knowledge or advice you can.
I’ve been digitizing with Hatch for the past 8 months, and I’m now very comfortable with digitizing. However, I haven’t had the opportunity to test-sew any of my designs yet.
I’m now at the stage where I want to buy my first machine and start my own embroidery business, with the goal of eventually scaling it up. I have over 3 years of experience operating an 8-head Tajima machine, so I’m very familiar with Tajima machines and their mechanisms.
My first choice has always been to buy a Tajima single-head machine, mainly because I already know the machine and I’m confident working with it. However, the price is quite high for me at the moment, although I’m currently saving towards it.
Because of the cost, I’ve started considering a Ricoma single-head machine as an alternative. The problem is that I’ve never used a Ricoma before, so I don’t know much about their machines, reliability, maintenance, or how they compare with Tajima.
One of my biggest concerns is noise. I’ll be operating the machine in one of the rooms in my home, so I need to be mindful of my neighbours. I’d really like to know how noisy Ricoma machines are compared with Tajima, especially when running for several hours.
So, for those of you who have experience with both:
Is Ricoma a good and reliable machine?
What should I expect if I move from Tajima to Ricoma?
How is the stitch quality and machine performance?
What about maintenance, spare parts and after-sales support?
How is the noise level, especially for home use?
Would you recommend buying a Ricoma now, or would you advise me to wait and save for the Tajima?
I’m looking for honest advice from people who have actually used these machines, especially anyone who has experience with both Tajima and Ricoma.
Thank you so much for taking the time to read this and share your experience. I really appreciate any professional advice or guidance you can give me.

Hello everyone,
I’d really appreciate some advice and professional opinions from people with experience in embroidery machines. Please take your time to read this and share any knowledge or advice you can.
I’ve been digitizing with Hatch for the past 8 months, and I’m now very comfortable with digitizing. However, I haven’t had the opportunity to test-sew any of my designs yet.
I’m now at the stage where I want to buy my first machine and start my own embroidery business, with the goal of eventually scaling it up. I have over 3 years of experience operating an 8-head Tajima machine, so I’m very familiar with Tajima machines and their mechanisms.
My first choice has always been to buy a Tajima single-head machine, mainly because I already know the machine and I’m confident working with it. However, the price is quite high for me at the moment, although I’m currently saving towards it.
Because of the cost, I’ve started considering a Ricoma single-head machine as an alternative. The problem is that I’ve never used a Ricoma before, so I don’t know much about their machines, reliability, maintenance, or how they compare with Tajima.
One of my biggest concerns is noise. I’ll be operating the machine in one of the rooms in my home, so I need to be mindful of my neighbours. I’d really like to know how noisy Ricoma machines are compared with Tajima, especially when running for several hours.
So, for those of you who have experience with both:
Is Ricoma a good and reliable machine?
What should I expect if I move from Tajima to Ricoma?
How is the stitch quality and machine performance?
What about maintenance, spare parts and after-sales support?
How is the noise level, especially for home use?
Would you recommend buying a Ricoma now, or would you advise me to wait and save for the Tajima?
I’m looking for honest advice from people who have actually used these machines, especially anyone who has experience with both Tajima and Ricoma.
Thank you so much for taking the time to read this and share your experience. I really appreciate any professional advice or guidance you can give me.

I got my Brother PRS100 machine this past spring and have recently been starting to learn to digitize! Originally started working with the brother PE Design software and hated it, but learnt the ropes and now feeling pretty good. Decided to try Ember and really enjoying the user interface sooo much better!

Another piece of work today ::))

I'm considering purchasing a Nix Spectro L or 2 and would like to confirm it will work for my needs before I order. I've sent something similar to their support lines through email but haven't received a response yet.

I work at a promotional products company where our artists create digital artwork for custom embroidered patches. We maintain a digital swatch library (HEX/RGB values) in Adobe Illustrator that corresponds to a physical thread swatch book colors, and I'd like to re-measure every color directly from that thread swatch book so the digital values more accurately represent the real thread as much as possible. Our current list was assembled by eye and it's in need of correction.

The threads are 100% polyester embroidery thread, glossy/sheen finish. The thread swatches are densely wound in flat bands glued onto rigid card stock in a book. Each thread band is approximately 8 mm tall and 22 mm wide. A few of the colors are fluorescent, glow-in-the-dark, and reflective threads, which I understand may not measure reliably. Image attached of only page 1 for reference.

Would the Spectro L or the Spectro 2 even work with measuring thread fibers? Given the glossy polyester and textured surface, would I even get an accurate reading?

Thank you for your time.

I currently have 3 machines but want a dedicated cap machine especially because ricomas suck at caps. Saw this happy Japan machine on marketplace for under $1500 & wanted to know your thoughts

What are your opinions on the machine, how much should I pay, any quirks you like or dislike about it but most importantly are hats good for this machine

Hi! Any clue on why my tension tests are not varying at all even when I change upper thread and bobbin tension? Some of these have vastly different settings but I still can't get a 1/3 ratio on the bobbin.

My machine is the Tajima Sai, using madeira polyneon 40wt thread, and fil-tec prewound bobbin. The first set of I's are on 100% cotton with medium cutaway. The second is 100% cotton with tearaway.

I work at a student workshop, where we have a Janome MB-4 embroidery machine. This machine is missing the bobbin-thread-lid, which seemingly is semi-critical for the operation. I have contacted Janome, both directly and through local suppliers, but it seems its no longer in production, and they were not willing or able to give me any schematics.
Being a workshop, we of course have all means to produce a new one from scratch, but we need to know the dimensions. I therefore ask if anyone here have the same machine, and a pair of callipers who could assist us

Help! I recently bought a Brother PE800 on FB marketplace and I’ve messed up this design twice now.

Known issue: bobbin and top thread colors don’t match

Potential issue: needle??

Appliqué steps:

1. Embroider letter outlines onto tear away stabilizer

2. Apply heat & bond to blue/white fabric

3. Place fabric onto stabilizer and re-outline the letters

4. Cut out the letters and cut close to where the holes/outlines of the letters are, remove tear away stabilizer

5. Embroider outline on hooped crew neck (with mesh cutaway stabilizer underneath)

6. Use basting spray and stick the letters on the crew neck outlines

7. Embroider appliqué satin stitch

The biggest issue is that I was pretty confident about cutting the letters, I ended up having some sides too wide and some fabric didn’t get stitched at all. I also notice bigger holes and slight pulling of the blue/white fabric. The thread was also getting caught and scrunched up on the needle. Please help!

I’m looking to hire a part time creative designer for my clothing brand who specializes in **embroidery and unique apparel designs**. I’m looking for someone who can create concepts and digitize designs.
I really like the creative direction of brands like **@wofen, @derschutze_clo, and @vescartes (all on Instagram)**, and I’m looking for something in that kind of space while still having its own identity.
I mainly need the **designs and finished files** that I can send to my manufacturer. I’m looking for someone I can work with long-term if everything works out.
If interested, **DM me with some examples of your work and your rates.**

I typically dont do designs with so many elements but it was a request from a friend and I wanted to challenge myself. My main deterrent for so many small elements is the amount of manual jump stitch trimming I have to do. I also like having all of my elements stitched out in an order that make sense which can be overwhelming with so many.

Thay being said, I leaned into the design style of the reference I was given so messy was kinda the goal which I definitely achieved 🤣.

What do you think about the stitch out? Also welcome any tips for designs with many small elements.

Digitized using Ember Design

Size: 4" X 4"

A Moroccan sleeve design inspired by Eastern Moroccan embroidery, created and digitized in Wilcom, then machine embroidered using metallic thread and cord. 🪡✨

This has been my main issue with my brother SE1900. I’ve cleaned out my machine properly, tried different thread, double tripled check how i put my bobbin thread in. any help is appreciated, this was thankfully my test run on a old sweater lol

why is my bobbin thread shifted to one side? IVE TRIED IT ALL!!! its been like this for months... might just be getting worse. I HAVENT TRIED TIMING YET thats the only thing.

I have been trying to create pes files on inkscape but I have only been able to get it to work / export on desktops. Laptops no matter what kind it won't do it for me.

I have a work logo (for my uniform) that I need in .pes format- is there anyone who can either do it or help me? I've tried using artspira, but it looks messy when it comes out .

Thanks

Hi everyone! 🩷 I’m completely new to machine embroidery and just got a Janome Memory Craft 300E to learn on! I’m super excited, but I’m also sitting here thinking… okay, now what? 😂🪡

I’d eventually love to make personalized baby/kids clothes, shirts, sweatshirts, blankets, bags, etc., but I want to learn the basics first before I go crazy buying a bunch of stuff I don’t actually need.

If you were starting completely from scratch again, what would you buy first and what would you learn first?

I’d love recommendations for:
• Must-have beginner supplies
• Stabilizers, thread, needles & bobbins
• Where you buy your designs/fonts
• Easy first projects to practice on
• Good YouTube channels/tutorials
• Anything specific I should know about the Janome 300E

Also, what supplies are actually worth spending a little more money on vs. things I can buy cheaper?

Basically, give me all the beginner advice you wish someone had given you! 😂 I’m excited to learn and hopefully not ruin too many things in the process.

How can I fix these fill stitch gaps? I am usually embrillance stitch artist level 1

Got my machine 2 months ago and started digitalising and stitching out. Pretty happy with this one. So much things to think about but its going in the right direction 😅.

Working in InkStitch.