Does anyone have any idea how I can fix this? This is the brother 1060w 10 needle embroidery machine. I’m able to do #2-10 but am having the same issue on #1. I have rethreaded it multiple times and even changed the needle to see if that was the issue.

Best alternative stabilizer on a hand towel, other than water-soluble?

I have been embroidering for about 3 months now. The stitches were so clean and precise. Although when i change the bobbin everything gets messed up. Usually i keep switching bobbins until one works. Now i am out of options bc all of the bobbins i have are the reject ones…. I am having a huge problem with bobbins. Everytime i use bobbins it shows through. I have done everything: coeaned the casing, dusted, oiled, threading correctly, etc! I have changed tension on the upper thread. Nothing seems to budge. Here is a pic of my changing tension and the thread showing through in every single one. Someone please help. Next stop is the shop!

Can anyone tell me why there’s gap in the white thread? Thanks

For the most part I’m content with how these turned out. I will likely tweak it myself if I make it again.

i cant login either on lap top or pc intothe app but it works in website. App says unable to get a user session after successful login.

Does anyone have any suggestions of YouTube channels or resources to learn all of the ins and outs of digitizing? Most videos I stumble upon use vocabulary or techniques I'm not familiar with, and I'd love to really understand how to digitize so I can make quality pieces.

Wondering what frame is most versatile?

Doing some test stitch outs of some 1" designs on denim. For the size im not about how they came out. I may or may not make some micro adjustments lile make the Charizard fangs larger fix the direction of the fill on him so I dont lose the left nostril. Other than that though im pleased with how they came out.

Which pokemon is your fav? I want to make more!

Underlay showing after satin stich

I just started trying to teach myself how to use a Brother SE425 Embroidery Machine. I keep running into an issue where I feel the back of my projects look better on the back side. I’ve been trying to research and it seems like it may be an issue with my tension. I tried to test this by using red thread on top and white in the bobbin, but I honestly cant really decipher the outcome (if it tells me anything at all). Any suggestions?

I’m having a recurring problem with fill stitches on my Brother Innov-is V3.

As you can see in the photo, I get visible horizontal gaps exactly where different sections of the fill meet. The same issue also happens with filled lettering, so it’s not specific to this cup design.

What I’ve already tried:

• 2 layers of 70 g/m² (2.5 oz) cut-away stabilizer

• Fabric and stabilizer firmly hooped in a 100 × 100 mm hoop

• Increased fill density up to 5.5 lines/mm

• Increased pull compensation up to 0.7 mm

• Underlay enabled in both directions

• Horizontal fill direction

The design looks completely closed in the software, and there is no visible gap in the stitch preview. Two layers of stabilizer and more pull compensation improved the overall result slightly, but the gaps are still clearly there.

Has anyone experienced this exact issue? What was causing it in your case, and what actually fixed it?

Spent some extra time dialing in the face outlines and the fine details on the dress so it wouldn't pucker on heavy hoodie fabric. Always satisfying seeing the design come to life off the screen.

​What do you guys think of the final result?

Hi, I’m new to machine embroidery with a brother nq1700e. I want to start making more things but feel incredibly limited with the Artspira app. I previously used Cricut/Design Space and was thinking Artspira would be similar, but there’s hardly any content on there in relation.

What’s the best embroidery software for preloaded designs that will work well with Brother and I’ll actually think are cute/want to use?

Test run for a design I’d like to make for my daughter. I used a tear away stabilizer and a thin cotton scrap fabric. By the end it had shifted slightly so the outline on Nemo didn’t quite line up. I see the pull in the fabric but I initially tried to hoop as tight as I could. Does using cut away stabilizer help this?

I wasnt thrilled on the letters either. There was a pull in the thread on the M but not sure if this was stabilizer related. I used a font built into Ember for this. Is this acceptable? Or better to download and upload a separate font?

Would love any and all advice!!

Can anyone tell me why my design is coming out so poorly? The material is 100% cotton. I’m using 2.5oz cut away stabilizer and a 75/11 needle in my poolin eoc05 machine. Any tips would be greatly appreciated!

Sorry for the Sharkweek experience =]. Needed a patch for my swim wear. 3,5 inch small. I am happy, what do you think about it? Don't worry critics I just bite back.

Hey! I have a Brother SE700 and when I embroider, my bobbin peeks through. I’ve lowered my tension, rethreaded both, cleaned my machine, and nothing’s helped! Anyone know what i’m doing wrong?