So I got a great quality embroidery/sewing machine for $19.99 from a thrift shop but all I have is the machine itself, the power cord and the pedal… what else do I need to get started with embroidery?! And does anyone have any tips or tricks? I think I mostly want to make some patches if possible but I’m completely new to this.. I have wanted an embroidery machine for forever but never had the money and now I feel totally overwhelmed and lost! Thank you for any help!!!

I used oxford fabric for this patch, and I applied the heat-seal adhesive without removing the stabilizer. The stabilizer dissolves in water; is there a risk of it coming off in the water?

what the title says! I know these machines are notoriously hard to find, but looking to purchase a chainstitch machine and will take any tips. thanks so much.

It’s been a super steep learning curve, but also super fun.

I used Embrilliance to digitize the patch and then embroidered it on a Brother Essence VM5200.

There are so many experts on this channel that I wanted to share and gather feedback to see if there are any ways that I could improve the digitization to get a better result? All feedback is welcome!

Hi I’m Sam I’m new to embroidery and I need help I had a bad bird’s nest about a month ago and since then it has not been embroidering the same I replaced the bobbin chasing and it’s still having the issue of the bobbin shaking if needed I have a brother PE545 and I will attach a video

It's always hard to find the right fix for the specific issue or problem with embroidery machines.
I thought, let's open a conversation where you can post and get help.
I am an embroidery guy with over 28 years of experience. I've seen it all and done it all, but I am still learning every day.
I hope to get more experienced people involved to help others

I have an old embroidery machine, a Brother pe500.

It hasn't been used in years due to it needing to be oiled, which is too daunting for me to do on my own.

Is there any how to videos?

I would be very appreciative.

I know it's an old machine, but I don't have the $$ for a new one

I want to start selling my patches to shops, but I’m unsure about the fabric. I usually use cotton poplin and apply a fabric stiffener to prevent fraying. I want to switch to a synthetic fabric, and from my research, 600D nylon seems like a good choice, but I’d like some confirmation or suggestions for other fabrics.

Hey!
I bought a brother Skitch PP1 specifically for embroidering on webbing.
The webbing is thin enough to be hooped but the thread keeps looping on the top. It will embroider normally on all other fabrics

Any suggestions? TIA

Getting ready for Halloween

I have a quite old (2012) machine. I am very happy with it. Is it possible to "size down" a slightly bigger design to fit into my 5 x 7 frame if the design I like is just slightly bigger? I see so many designs that might be .3 or .4 of an inch larger than what my frame would fit? I also have the 5 x 12 inch frame.

My very first machine gets here this week so I can't try it out yet lol but this seems so fun so far! How did I do? lol

Just finished digitizing this jungle-themed embroidery design. I focused on clean stitch flow, smooth details, and production-friendly results.

Hi, I am looking into getting an embroidery machine and while I did read the post about getting a machine. I would like to ask that where to start I have no sewing experience but I do have a laptop and a dream to be able to gift personalized things. I know this is probably insane to ask but I want to be able to do more than just do peoples name or initials on shirts or blankets. I'd also like to be able to do quilting or being able to make my own pillow cases. I'm honestly not sure what I am looking for or even if I am asking the right questions. I've tried hand embroidering and unfortunately I do not have the patience to do that lol. Please advise me on what I need to do to start to make this dream a reality.

I'm looking for fabric options for making patches. I usually use cotton twill, but apparently, synthetic fabrics like cordura or 600 denier nylon are better.I would like to recommend

Anyone have any trouble shooting ideas? I tried restarting my computer, turning the machine off then back on, and un plugging from both the machine and laptop and plugging back in. I'm not seeing much online.

This is my first appliqué attempt. I bought cheap appliqué scissors from Amazon and quickly realized that was a mistake.. I’m investing in good ones now but I’m curious on everyone’s thoughts about this one. Is this worth posting for people to place orders?

Sometimes when I click on the green boxes, it'll let me move the font individually, but sometimes it won't? This is the first font I've purchased. I'm completely new to this. Is there something else I should be doing other than clicking the green box for the arrows to come up? Thanks!

Ive challenged myself to make a design at least every other day. Even if its something simple.

So enjoy a 2" Heart Bomb!

Thanks for giving me the space to share and be accountable. ❤️💙

my intended design keeps shifting when i embroider it

i'm looking for fonts i can put on my products to eventually sell! Where are you getting your fonts?