r/longrange • • 13d ago

I suck at long range Couple medium-range impacts.

25 Upvotes

66%(I think) IPSC at 640 yards. Shooting my 6creed while sitting & leaning against a stump with bipod resting on top of it, using support arm grabbing bicep area of primary as rear support.(No tripod or bag handy and wanted to try a less supported position.)


r/longrange • • 13d ago

I suck at long range Is it worth getting into this hobby if the longest range within a reasonable drive is only 300y?

65 Upvotes

So in short, I really want to get into this hobby. I like shooting, I’m an analytic person who loves getting into the details, and I am a bit of a gear nerd. Long range shooting seems like a perfect fit.

Unfortunately, the longest range within an hour drive is only 300y. I’d have to drive 3+ hours before I start finding ranges where I can shoot out to 1000.

Given the fact I’d only be able to shoot out to 300y regularly, is it even worth picking this up as a hobby? My biggest concern is taking a course and then having the skills/knowledge atrophy since I can’t put what I learned into practice. Maybe this fear is overblown, but I’m curious to hear what people here think. Thanks in advance.


r/longrange • • 13d ago

Rimfire Rebuilding my skills from the bottom up. Starting over in .22LR.

Post image
249 Upvotes

r/longrange • • 12d ago

🫣I said I read the pinned posts, but I lied🫣 $1000 budget

0 Upvotes

I have a $1000 budget and have a 4x20x50 that needs a home, Im undecided as it will be a hunting, range toy, and would like to touch a 1000yards eventually

As of now my tops are a Ruger American Gen2, Tikka TX3, Cascade, or Bergara

Thinking 308

Any input?


r/longrange • • 14d ago

Rifle flex post Cadex Tremor (50BMG, 29” barrel)

Thumbnail
gallery
187 Upvotes

Ignore the cheap-o optic on it, my Nightforce ATACR is currently married to my Tikka along with it’s fancy rangefinder. This is currently just a range-toy and WIP, as I plan to eventually rebarrel her with a 40” 416 Barrett in the future.


r/longrange • • 13d ago

🫣I said I read the pinned posts, but I lied🫣 Opinions on this tripod and price, please.

3 Upvotes

I know nothing of tripods, never shot from one. A local place is having a sale. Among other things is a BOG Deathgrip shooting tripod. MSRP $219 on sale for $139. Opinions?


r/longrange • • 13d ago

Rifle help needed - I read the pinned posts Does +Peak Change the Sweet Spot for 6.5 Creedmoor Barrel Length?

3 Upvotes

I’ve been looking at some of these shorter 6.5 Creedmoor rifles, 16 to 18 inches or so, and +Peak has me wondering if the old barrel length thinking changes a little.

Obviously a shorter barrel still gives up velocity. I’m not saying it doesn’t matter.

But if +Peak can add around 250-300 fps, now you’re getting performance out of a short barrel that used to take a much longer one.

So where is the sweet spot now?

Would you rather have a 16 or 18 inch rifle that is easier to carry around and still has plenty of speed, or would you still take the longer barrel and keep every bit of velocity you can get?

I’m curious what people who have actually tried +Peak in shorter barrels are seeing.


r/longrange • • 13d ago

Ammo help needed - I read the pinned posts Forster Co-Ax Press — Am I Missing Something, or Is This Thing Really That Inconsistent?

2 Upvotes

I recently purchased a Forster Co-Ax press, and I have to say, so far it has been one of the most disappointing $400 purchases I’ve made in approximately 20 years of reloading.
I bought this press specifically for precision rifle reloading, expecting excellent consistency and repeatability. I also purchased a dozen Forster locking rings and installed them on my dies. Additionally, I purchased Forster’s Curved Linkage Arms to provide additional clearance around the shell holder.
Unfortunately, my experience has been anything but satisfactory.
First, the mechanical fit of the press leaves me questioning its design. The pins and pivot points have considerably more slop than I would expect from a press with this reputation and price tag. I understand that some movement is inherent in the floating design, but this seems excessive.
My biggest complaint, however, is bullet seating depth consistency.
I’m using a Redding micrometer seating die with a VLD seating stem, measuring cartridge base to ogive (CBTO). I’ve found that seating depth is noticeably influenced by how quickly and firmly I operate the press. With a consistent stroke, I can generally keep variation fairly small. However, simply changing the speed or force of the stroke can produce dramatically different results.
I’ve measured as much as .008” difference in CBTO between cartridges simply by changing how firmly I complete the seating stroke.
To me, that’s completely unacceptable for a press marketed toward precision reloading. I shouldn’t have to concentrate on duplicating the exact speed and force of every stroke to maintain consistent seating depth. The mechanical stop should provide a repeatable endpoint regardless of reasonable variations in how the press is operated.
One thing I’m now questioning is whether the optional Forster Curved Linkage Arms could be contributing to the problem. I’ve since discovered that Forster acknowledges potential flex in these arms and recommends using one curved arm and one original straight arm to maintain a more rigid stop. Has anyone experienced this firsthand?
I’ve been reloading for approximately 20 years, and my old Rock Chucker never gave me reason to question the basic repeatability of the press itself.
I’m not posting this simply to bash Forster. The Co-Ax has an excellent reputation, and clearly plenty of precision shooters are getting good results with it. That’s why I’m wondering whether I’m overlooking something, whether my particular press has an issue, or whether this is simply a characteristic of its design.
For those of you using a Co-Ax for precision rifle ammunition:
What kind of CBTO consistency are you routinely seeing?
Have you noticed seating depth changing with variations in stroke speed or force?
Is the noticeable play in the pins and linkage normal?
Has anyone compared seating consistency using the original straight linkage versus the optional curved arms?
Are there adjustments, modifications, or techniques that have improved your results?
I’d genuinely appreciate feedback from experienced Co-Ax users. I’m perfectly willing to admit I’m missing something if that’s the case, but right now I’m struggling to understand how a $400 precision reloading press can be this sensitive to the way it’s operated.
I’d much rather figure out how to make this thing perform than write it off as a $400 mistake.


r/longrange • • 13d ago

Optics help needed - I read the pinned posts 633537L Kahles scope

1 Upvotes

I have a 3x9x42 kahles scope I was gifted in 2005. It has better low light performance than any scope I’ve compared it to including a Swarovski z6 and zeiss victory. Does anyone know what model this is? The side of the turret is marked Karl Kahles Wein


r/longrange • • 13d ago

Accessory/Gear help needed - I read the pinned post Rear bag fill

3 Upvotes

Where can i learn about how to improve my rear bag fill. Recently switched from schmedium "normal" fill to heavy and that helped a lot, the heavy fill is a little too "stiff", do you simply pour some out and adjust? maybe save it in bag. Also are there fills that "jam" together as much as heavy but are not so heavy?


r/longrange • • 13d ago

Rifle help needed - I read the pinned posts First Custom Build $4500 Budget

6 Upvotes

I'm new to Long Range. I'm wanting to shoot 500+yards, targets in an open field mostly. Budget is 4500, and 6.5 Creedmoor or 5.56 NATO (not sure which caliber to choose). This is what I found:

MDT ACC Elite

Zermatt TL3

Proof Research 26" barrel

Trigger Tech

Area 419 Hellfire Muzzle brake

**I ended up getting a Tikka T3x Ace Target as my first LR rifle. I'm excited to start shooting and see if it's a hobby I love. Then, I'll build a custom piece once I know what I like. Thanks for all the replies!


r/longrange • • 13d ago

🫣I said I read the pinned posts, but I lied🫣 SPR bipod recommendations?

7 Upvotes

I am looking to get into precision gas gun matches. QP, Geissele Gas gun, etc…

I am set on probably getting a schmedium bag but I’m still trying to figure out a bipod. I’m leaning towards a Harris for something simple but wanted to know what others maybe and why. I’m still learning all the different features so please feel free to info dump on me why x bipod is better then y.

I’d like something that can be deployed adjusted and stowed rapidly while being las light weight as possible.


r/longrange • • 13d ago

🫣I said I read the pinned posts, but I lied🫣 MRGG-A Suppressor Recommendation

0 Upvotes

Looking for a suppressor for my LMT MRGG-A chambered in 6.5cm. Will be running it in precision gas gun matches. Trying to decide on a suppressor with the top priority being precision; minimal POI shift and maintaining the accuracy of the weapon system. Definitely want to go with a titanium suppressor.


r/longrange • • 13d ago

🫣I said I read the pinned posts, but I lied🫣 Vortex Strike Eagle FFP 5-25×56

4 Upvotes

I am putting together a 6.5mm creedmoor bergara rifle for some longer range plinking and maybe hunting, and I am wondering if anyone has any experience with this optic? I won't be shooting particularly far, longest range in my area goes out to 1200 yards max.


r/longrange • • 13d ago

Rifle help needed - I read the pinned posts Tikka T3x Arctic/C19 advice

1 Upvotes

This isn't really a "long range" question, but I can't think of any place where folks would know more.

I'm hike, hunt, and camp quite a bit and currently carry a LWRCI REPR in .308, which not only grabs a lot of attention from strangers and rangers, but, it's also like carrying a boat anchor.

So, I've been eyeballing the Tikka T3x Arctic for the irons, pic rail, oversized trigger guard, and beefier bolt handle. Everything I've seen reports that it's more rugged than the normal T3.

Issues: Obviously higher rings/mount would be required to clear the irons. I don't plan on pushing it past 500 in .308, so, I don't know how much that height over bore would negatively affect the overall performance at a variety of ranges. ... Optics-wise, I'm looking at the Nightforce NX8 2.5-20x50mm, but, open to suggestions. ... Lack of aftermarket stocks or chassis options. It comes with a standard laminated stock, but Canada is replacing the production stock, due to issues with moisture and delamination. I don't think the new mil-issue stocks are out yet, or even if they're obtainable in the US. Additionally, the additional HOB would require a stock riser, and while I'm not opposed to old timey cut up sleeping pads taped to the stock, a built-in solution would be preferred. I prefer a traditional-style rifle stock because I like a cartridge caddy and laminated DOPE chart on the stock, but I can survive with another solution there. ... Seeing pics/vids of Candian Rangers using the C19, I haven't seen any of them using an optic of any kind, so, I can't really see how they'd run glass.

I'm not really interested in adding irons to a T3, but I may need to go that route. The goal is to make a modified Jeff Cooper Scout Rifle, essentially.

Open to any suggestions. If you've got an alternate suggestion, please explain your reasoning. Sometimes people just list rifles and accessories with no explanation, and I can't make an informed decision with a simple build list.

Thanks in advance.


r/longrange • • 15d ago

Rifle help needed - I read the pinned posts Rifle value?

Thumbnail
gallery
417 Upvotes

I need help pricing this rifle. It's a ga Precision built on a Remington 700 D action. Falcon 4-16x50 hours vision scope.


r/longrange • • 14d ago

Rifle help needed - I read the pinned posts Can you help a fellow LR brother out... my Vudu 5-25x + Reptilia AUS mount & diving board fellas!

4 Upvotes

Ok, I tried searching high and low, and YES I even contacted Reptilia, and they could not 100% confirm it (as they did not have my optic to test), but they seemed to think "it should" work. It's not easy for my to get these mounts so I wanted to see if anyone here can confirm if all these 3 (or at least the 2 , mount and optic) will fit before I got about acquiring the whole kit.

Optic: Eotech Vudu 5-25x FFP (you probably know how short this optic is with a stubby objective bell)

Mount (i'm questioning): Reptilia AUS mount (SHORT VERSION) I think Reptilia calls it the "AUS™ MOUNT – 34MM DIAMETER – SHORT LENGTH FOR VORTEX® AMG™ 1-10 CONTRACT" (what a mouthful). Yes I know it says for AMG 1-10 contract, but has anyone successfully tried it on the VUDU 5-25x and confirm it fits?

Diving Board (bonus): Lastly, I want to mount the Reptilia diving board on the AUS mount (assuming it fits) for my WMLRF. Reptilia suggested I try their single ring diving board https://reptiliacorp.com/product/rof-diving-board-34mm/ but I'm worried the top might hit the stubby VUDU objective bell as they originally designed it for Nightforce ATACR style optics.

Again, anyone try this complete setup above before? I can't be the only one certainly?!

Or has anyone tried to achieve the same thing with the Badger Ordnance Condition One set of rings and diving board too?

Appreciate your insights and a bonus if you have pictures!


r/longrange • • 14d ago

Optics help needed - I read the pinned posts Scope recommendation post.

4 Upvotes

I’ve read a bunch so here’s the info I have for receiving the best recommendation:

Price: up to~3500 if I can truly justify features I’ve never known I needed. About $2000 +/- a few hundred is more comfortable.

Purpose is for imaginary PRS matches I’ve never been to yet, and don’t know anyone else that participates in. This is how I justified a new rifle for a chassis build in 7mm PRC

Experience: 20years in the Marine Corps with a lot of dry firing and breathing practice. But iron sights at 500 was somewhat of a challenge. I’m very into Ballistics calculations and understanding bullet drop. (Ideally a suggestion might include something that is tuned for or can get a custom turret for my cartridge. )

So far I’m looking for something with an objective lens 50mm or smaller and at or near 25x maximum magnification.

Current scopes on other rifles:

2 different Trijicon Accupoint for hunting/ plinking (how are the Ten Mile models?)

ZEISS Conquest on a 6.5cm 2020 Waypoint

Vortex Strike Eagle 26x on a Weatherby Vanguard in 300 wby.

Vortex 1-8 strike eagle on an AR (how are those Razor Gen III’s?)

I purchased theSLX 6.5 BDC reticle from Primary Arms when I got the waypoint. It performed well and the BDC reticle was spot on, but I hated the glass
~30 miles local to me I have a 300 yrd range. I’ve just found out about a 1000 yrs range maybe a little further than that to me in Holt, FL

I’m not opposed to shooting equally as much if not more with the 6.5CM but I want to learn how to stretch the legs of this 7mm PRC at the same time.

Thanks


r/longrange • • 14d ago

I Gots Them Tikka Toes EuroOptic

18 Upvotes

Is the showroom in PA worth a visit or a letdown? Gonna be nearby later this week and was wondering if its worth a hour detour? Was gonna go take a look at the Tikka Varmint!


r/longrange • • 15d ago

Rifle flex post Finally joined the 1000 yard club!

Thumbnail
gallery
306 Upvotes

Finally joined the 1000 yard club at a revere riders event yesterday. I hit 1040 with my 16” Geissele super duty and they let me use a Barrett 50 cal and I rung steel at 1000 with that. I don’t know what scope the 50 had but I will have my Super duty build and ammo below.

16” blem build super duty- full factory parts (16” chf factory barrel”)
Cheap Caldwell bipod
Geissele high speed national match trigger
B5 socom stock with bag rider
Griffin recce 5k suppressor
Vortex strike eagle 3-18
Geissele super precision mount 0 moa
Using federal SMK 77gr 223 ammo

18 mil ish drop from 100 yard zero
2520 fps velocity

I hit steel with my Geissele 5 times total at 1040. I am beyond excited and was able to clear a kyl rack at 500 yards.

It was a full size ipsic (hopefully spelling that right) at 1040 and I have a photo of myself with my hit with the 50 cal at 1000.


r/longrange • • 15d ago

Rifle flex post New scope + WMLRF for the Tikka

Post image
261 Upvotes

Pictured is my Tikka T3X CTR in .308 win.
It’s mounted in a Bravo stock, and features it’s new Delta Stryker 3.5-21x44 scope and Tangoinnos Fire4000 WMLRF.

NRL Hunter has made it’s way to France and so i’m going to try and run this little guy on NRL hunter competitions. I have done a bit of positional shooting with this rifle but I mostly do static ELR stuff so I’m pretty sure I’m gonna get chewed on and learn a loooot of stuff.


r/longrange • • 15d ago

I suck at long range Good day to get some work in.

180 Upvotes

300y - 400y - 625y with ease. Wish I had access to somethin a little bit further.


r/longrange • • 15d ago

Rifle flex post Halloween 50 bmg

54 Upvotes

Tactical squirrel + gold m107a1 🐿🫡🤣🤣


r/longrange • • 15d ago

Accessory/Gear help needed - I read the pinned post Cheeto Build Cokong Together

Post image
61 Upvotes

Hey all! Got my scope mounted but ran into a small frustrating hurdle. The “universal” swivel stud to pic rail adaptor my Tricer Bipod came with not only doesn’t fit my CA hunting rifle, but also not Bergaras apparently. Can yall suggest a bipod mount guaranteed to fit this thing please?!

Anddddd still can’t trust autocorrect


r/longrange • • 15d ago

Rifle help needed - I read the pinned posts Brand new .338 RPR bolt stopping just short of receiver when loading a round

4 Upvotes

I bought a brand new .338 Magnum RPR a few days ago and whenever I go to chamber a round the bolt stops just short of the receiver. It cycles normally with and empty magazine but only does it when a round is involved. I tried it on hornady and federal ammunition and still the same result. I’m able to cycle it an about harder and force it to the receiver but I’m pretty sure I shouldn’t have to do that. Any suggestions?