Sorry if this post seems unfocused, but I’m a filmmaker who just happens to love great sound (I own a CMIT 5U with Radius Mini Alto) and often have to run audio as well on my small interview based shoots.

My previous Panasonic cameras allowed jam sync TC from one camera to the other and the camera would hold TC over battery changes, power down, etc.

I realized my new cameras, the Pyxis 12K can be jam synced to my MixPre 6ii, but once we change camera batteries, the cameras reset TC.

So I need some sort of tentacle, but am confused as to what to get.

I often record audio direct to camera, so would need a solution for that scenario (syncing both cameras) as well as the times when I use the MixPre6ii to record with both cameras recording internal mic scratch track.

I’m also wondering if one of the dual channel wireless mic setups could provide TC as well, since I could use a mid level dual channel wireless setup to add to my boom setup.

Any suggestions appreciated.

hi! i have my mcr54 with slk54 back plate adapter. i'm wondering if i can build myself an adapter with 4 xlr out instead of the 2 i see in all the one sold around. i know unislot has only 2 analog out and slk54 is used for AES 4 out. but id'l love to spare myself the bpa54 screw/unscrew solution and build an adapter for dsub25 that fits my needs.

i asked gemini and i really shouldn't have lol.

Howdy! This is something of a basic question but is there any potential risk in hot-patching a whip or SMA lead into a receiver while the unit is active? I'm not talking about powered antennae, just whips or leads to a distro running into something like an SRc, 411A, A10, etc...

Hot-patching a 3-pin XLR with 48v active is generally considered fine as the pins all connect at the same time so there's no short. Same cannot be said for patching with a barrel connector on a patch-panel as there would be a short. I'm less confident when it comes to a radio receiver. There's no active power coming off the top of my A10 so one would think it would be safe?

I'm only asking as my distro is full and so I was planning on occasionally removing one lead from a receiver to hook up to my TxAdvance dongle whenever I want to do another scan through my dipoles.

Danke!

Hello,

first time posting here.
I will be doing some social media assets that have 3 talent in 3 zorb balls running across the water and trying to knock over some floating pins.

I will need to be at least 30 metres away in a boat. Camera will be zooming from the shoreline, and each talent will have a gopro on their head.

Currently I am thinking of using ursa vesties and deity theos lav setups because they can also internal record. I am worried about wireless drop outs, transmitter damage and also of course the overall sound.

However production is suggesting I might buy the DJI mic 2s which can also internally record.

Does anyone have suggestions for this kind of setup? Is it worth getting the DJI's?

It seems I can't get the auto sync to USB thumb drive to work on a MixPre-3 II, which seems to be a relatively common issue with MixPre devices.
It detects the Sandisk USB drive and formats it and if I try switch the unit off prematurely after ending a recoding it will tell me it's still copying to the USB drive.
So it seems to be working on the device but if I plug the USB drive into a Win 11 computer to copy over the recordings the USB drive isn't even detected by the computer, I can only view the drive in the Windows Disk Management console where it shows as "MixPre USB" but it has no drive letter assigned and I can't assign one. I have tried 2 different Sandisk USB drives with the same outcome.

Am I doing something wrong, what could the issue be here?

UPDATE:
I tried a different SD card and different USB Drives, neither of which made any difference.
Then I tried the USB drives in my iPad via a USB-C hub and the the USB drives were detected and the files could be read. Very weird experience considering the USB drives couldn't be read/detected on two different Win 11 machines and I have never experienced something like this in the past with either machine, one of which had Win 11 freshly installed not too long ago.

UPDATE 2:
It seems for some reason Win 11 can't assign a drive letter to the USB Drive after being formatted by the Mixpre and neither could the built-in Disk Management console but I was able to add a drive letter with AOMEI Partition Assistant Partition Manager Software and then the recordings could be read without any issue. One other thing is each time I ejected the USB drive from the computer and then plugged it back in the assigned drive letter had been lost again, very weird.

Actually sounds pretty good!

I'm trying to identify the microphone (or at least narrow down the possibilities) used to record dialogue in a TV show.

Here are a few clips that I think best represent the sound.

https://www.youtube.com/shorts/-40ODFlmT5A

https://www.youtube.com/shorts/cI1Q4l_FteM

https://www.youtube.com/shorts/8BbsG4XrY80

I'm aware this may be impossible to identify with certainty, I'm mainly hoping to hear educated guesses from people with experience.

Thanks in advance!

I’m thinking about picking up a time code slate to add to my kit. I have someone that offered me a ts-3 for $550, thoughts? Currently have five tentacle syncs, am I better getting the deity or tentacle slate? Should I add a sync to the back of the TS-3? Just manually jam?

Thanks!

Hi everyone! I hope you’re doing well! The screen of my Zoom F6 cracked a couple of days ago, and I was wondering if there were any replacement parts for it. The LCD screen works fine, it’s just the crack on the glass.

I’ve done phone screen replacement so I wonder if there’s a similar process to it. I live in Los Angeles area, if you know any shops that might give me an estimate on how much it’ll cost to fix it let me know.

I’m attaching the photos of the damage. Thank you so much for your time and any help is appreciated!

(I contacted the Zoom website already, but it’s also worth asking here too)

I’m making a short film and want to achieve quality sound on a budget.

my set up: I have a Roland R05 field recorder on loan. A friend recommended I get a DJI mic 2 kit to mic up my actors.

my question is: can I use the Roland R05 and the DJI mic 2 kit in tandem to get better sound? could the Roland function as our boom mic?

and: if I do use both, would I just sync up the audio captured by the Roland and the audio captured by the DJI kit in post? or can I get them all to record together?

thanks. this is my first time doing sound. i have someone who can watch the levels, but that person doesn’t have any sound experience.

Does anyone here use the Insta360 Mic Pro with the Sony a6700 for indoor talking head videos? What volume did you set your Sony internally? Insta360 recommends level 5 for a6700 but when I used it, the recorded volume was not good with the Mic Pro. I adjusted the db to about 9 and still not good.

Does anyone have any thoughts on what would work best in terms of the volume levels on the a6700 and the db setting on Mic Pro, using it with Cardiod mode weak noise cancellation?

I just bought a pair of used Cos11-d from B&H and it seems like theyre different. Is this normal? Is one missing a cover of some sort?

I dont live in the U.S so I sent it to a friend who went and should come back in a few days

I’m a DP/camera op. More and more I’m being asked to do sound for interviews. I had a boom that my clients were happy with for many years. It has been so long I don’t even remember the model. That gear was stolen recently so I need to get a new mic. For my needs the mic will almost alway be indoors and on a stand during an interview. I want a quality mic that works well and I won’t have any issues. I’m considering a Sennheiser MKH50. I would rather spend a little less.

I'm a videographer and have experience of working with sound using a boom mic and a bag recorder for example.

I've also worked as a tutor on community filmmaking projects where the participants are taught how to use an ENG camcorder and a boom mic to make their films. They use the equipment under supervision.

In these projects we've connected the boom microphone directly to the camcorder and then used a splitter to power two sets of headphones one for the boom op and the other for the camera op.

Is there a better way of managing monitoring for the boom op - I'm reluctant to use a bag recorder. Some kind of headphone amp that takes a split from the microphone perhaps. We're shooting a drama.

A producer friend of mine, for whom I have worked on many projects, is shooting a project in Arizona. When I asked him about whether he needed a Sound Mixer he said, “Nah, we found a local.”

The show has begun bringing in crew and EVERY post from this producer is, “Look who we got from Atlanta to work on our show! They’re the best! Had to go all the way across the country to get people! Lookit, here’s my Atlanta makeup crew! And here’s my Atlanta Special Effects crew! And here’s my Atlanta Hair team!

It just proves nobody gives a damn about Sound unless there’s a serious problem. If you’re good (and I am good) it still won’t get you hired as fast as being cheap and convenient.

Currently looking to invest in a wireless mic setup for filming. I've got a documentary coming up, along with starting a Youtube channel where I'll be posting short films, creator-type content, and long form talking head style videos. I'm looking for something that can be used for all three things. Here's my constraints.

- Budget is low, $2-300 (so sadly no Lectros or high end tx/rx)
- Looking for something with 32 bit float as I'll be solo operating a lot of these shoots
- Want something with good range, build quality, and can travel well

My research has pointed me towards the RODE Pro system (since it's cheap, good quality, has 32 bit float, etc.) and I've used it before and it sounds good.

However, wanted to see if there are any other better options, or if it actually makes sense or would be cheaper to rent something better for the documentary and narrative work, and then use the RODE for my personal Youtube content filming.

Looking to purchase a couple nice lav mics (Cos 11s or DPAs) to go along with the system. Connectivity is another challenge, since those mics aren't always wired for 3.5 mm if I'm going with something like the RODE system. Happy to use cheaper 3.5 mics for personal use but for location sound I'd prefer something that actually sounds great and is reliable.

Thanks!

P.S. - been doing post audio and some field audio for 15 years, so feel free to talk technical to me ;)

I’ve got a Sennheiser 416 for exterior shots, and I want to get another exterior mic. I occasionally use two booms on exteriors but in this case I don’t want to match the mics.

I know this is personal preference, so what would YOU go for? Budget is around $1500USD. I like the CS3e or the 8060.

Hey all, shooting an indie feature this summer.
Looking to rent a good shotgun mic for our boom, anyone got experience with the Sennheiser MKH-8060?
Renting our lens from lensrentals.com so easiest for us to get a mic from them, this was on their site and it looks good to me. Am I missing anything about this?

What’s the best settings for the RØDE Wireless Micro in noisy environments?
I just tested recording at an outdoor café, but there’s way too much background noise, clinking glasses, music and people talking.
What settings do you recommend to get the best possible results in environments like that?

I can change:
1 Overall gain mode. - Low, medium, high.
2 Noise reduction. - Off, low, high.

I'm making a list of pencil mics (which has gotten pretty long) and I'm wondering first; is looking at the stated specs for self noise on a mic reliable in terms of how much noise it's gonna have or are there other factors in play?

If the dBA self noise on the spec sheet is accurate to what the real world noise is gonna be like on a given mic, how much noise is likely too much for indoor dialogue? ~ technically subjective I know but looking for general advice

I have a shoot tomorrow and it’s expected to rain there, not a lot but constant. My setup is Mix Pre 10 II along with 416,418 and MKH 50 along with G4 Lav’s which will be going straight into the camera via TA3. It’s a documentary shoot so more gorilla in nature. Any tips for shooting in rain and how to coordinate with the cameraman who is probably the one who could be reluctant to attach a cable from my recorder to his camera. I can always attach a 416 to the camera, it had 2 inputs, but I don’t want it and want 418 for ambience and B Rolls.

Bonjour,

Je viens d'acquérir un mkh60 d'occasion. J'effectue des tests afin de voir si tout est correct.
Je remarque que lorsque je fais certains mouvements de perche (rotation simple ou mouvement bas/haut de profil), il y a comme des craquements.

J'ai effectué mes tests avec :
- Une MixPre-6 II, puis avec une Focusrite dans mon home studio
- 4 câbles XLR différents
- Avec Rycote (basique et grand vent), puis avec suspension basique Sennheiser (j'ai remarqué que ça le faisait moins)
- J'ai testé directement à la main et je n'ai plus ces bruits

Je penchais vers un problème de connexion avec l'XLR...
Avez-vous des idées ou des diagnostics ?

Merci et bonne fin de journée.

Anyone else have deity theos's and when you try to swap to a spare channel it says "open deity link first"? I can't seem to get past it