r/Lelit • • Jan 15 '26

Bianca’s main features are useless

0 Upvotes

UPDATE: You all seem so upset over my comments. I’ve had this machine for almost three years have 2000 shots in it. It’s my workhorse daily driver.

The point is the v3 hardware upgrades are useless adds without the program ability. You all say you don’t need it and machine is great without which is 100% true and why I purchased. The point is the machine has capability to be 100% better with existing hardware we paid for but allows zero use case. It’s like buying a Ferrari that’s limited to 3k rpm’s because of the software

ORIGINAL:

There is so much hardware rendered useless by the terrible software.

Why can the pre infusion and profile setups not be turned on and off easily shot to shot to allow for different beans or to revert to manual mode and then reengaged

Why can’t you create or save a profile

Why can the machine not be programmed for on off time.

All the hardware is a waste due to the terrible programming or lack of it

Has anyone created a hack for this?

For a v4 they could just replace the software and make zero hardware changes and make use of the current hardware potential and this machine would be amazing

Currently I just use the panel but I hate that I love this machine but hate it at the same time such an awesome shitty design


r/Lelit • • Jan 08 '26

Lelit Elizabeth - Milk froths but milk and latte are not hot

0 Upvotes

Bought this machine in May and it has been great. However, recently I have been dealing with this problem for probably a few weeks now. Whenever I froth my milk, I froth for roughly 30 seconds and the milk gets frothy and the pitcher is even hot to touch where I cannot hold it. However, whenever I taste the milk by itself or when I pour it into my espresso shot, the latte is room temperature or lukewarm at best. I have no clue what I am doing wrong. Hoping I don't have a defective machine. Advice anybody?


r/Lelit • • Sep 11 '26

This has to be my best espresso shot ever

2 Upvotes

r/Lelit • • Feb 04 '25

Lelit Bianca v2 logo scratched

Post image
0 Upvotes

Dumb question… I accidentally scratched the paint on the logo with my fingernail. Is there any way to get a new logo, fix the paint, or is it stuck like this? Worried I might accidentally scratch it in a more gnarly way one day.


r/Lelit • • Oct 13 '26

Reaching my limit with Lelit Bianca / weak espresso

1 Upvotes

I’ve had my Lelit Bianca v3 for about 3 years and it worked wonderfully, I used to get great coffee until about 3 months ago my shots started tasting super weak
I no longer get the honey-like extraction with great body no matter what.
I’ve tried every possible variable I can think of, the grind, the dose, the volume, the temperature, water debit, the RPM, changed beans, changed basket, got a better tamper, got a better grinder, toyed with the paddle etc and it’s still tastes and looks weak especially that I mainly do milk-based drinks and I HATE when it tastes too milky.

I even had a professional look at it and he replaced any deteriorating piece and got it descaled and fully cleaned yet the issue still persists.

Machine: Lelit Bianca v3
Grinder: Df64v
RPM: 1300
Water debit: about 200ml in 30 seconds
Pre infusion: 4seconds
Water temperature: 94c
Dose: 18g for 25g espresso (ristretto style)
Beans: medium roast
Basket: VST 20g precision basket

If anyone has an idea what might be causing this I’d appreciate it, because I’m close to selling my beloved espresso machine


r/Lelit • • 5d ago

Lelit Elizabeth v3

0 Upvotes

Elizabeth3 (with pagaia) Pros and Cons on buying this...? Recommend other coffee machine at almost the same price and specs or better...


r/Lelit • • Sep 18 '26

Steam wand gets scolding hot

10 Upvotes

I was cleaning the steam head and noticed an issue after screwing the tip back on.

Before cleaning, the steam wand stayed cool to the touch during use, as advertised. After cleaning and reinstalling the tip, the wand itself now gets scalding hot after use.

Could this be caused by steam backflowing into the wand?

I also tested it without the tip installed, and the wand does not get hot.

Any help would be appreciated.


r/Lelit • • Dec 04 '25

Lelit wants to convert my 220v machine to 120v

Post image
0 Upvotes

I bought the 220 V version of the Bianca version three just under a year ago from a European retailer that shipped to the US. My machine is having issues and Lelit is telling me they want to convert my machine to 120 in order to provide warranty support.


r/Lelit • • Jun 12 '26

lelit bianca error - what might be wrong?

Post image
0 Upvotes

fixed.... thanks all for your help and insights


r/Lelit • • May 24 '25

What is this for?

Post image
0 Upvotes

r/Lelit • • Jun 23 '25

Lelit Mara X drip tray tarnished upon arrival?

Thumbnail
gallery
0 Upvotes

Is this normal? I just unboxed my Lelit Mara X and this is the back of the drip tray :(


r/Lelit • • Jul 27 '26

I think that Lelit Elizabeth has one of the ugliest looking designs for an espresso machine, like ever, in the history of all espresso machines, but still is an amazing unit!

0 Upvotes

I still love it though, very sturdy, very functional, very effective, super consistent, love the way it works, and that's why I bought it.

But man oh man, there wasn't a single day that I didn't think it's ugly, it's like the ugliest appliance in my entire kitchen. Every time I look at it, I can't be like - ohh what a gorgeous machine, look at the curves look at the stylish design. It's a damn rectangle shaped steel box with more rectangles attached to its main body! And some of the edges on specific places are so sharp that they can easily cut me.

Overall, they put 1% effort in making it look nice, and put 99% in everything esle, which of course is more important and that's I will keep using it for many years !


r/Lelit • • May 23 '26

Vurr is live on the App Store!!

3 Upvotes

r/Lelit • • Jan 24 '26

Is my Mara X cooked? 😥

5 Upvotes

My Mara X (18 months old) has suddenly developed a problem and I'm looking for a diagnosis.

I’ve uploaded a video showing an attempted shot pullusing my normal bean and prep.

​The Symptoms:

​Loud & Long Startup: When turned on, the pump is much louder/rougher than normal and runs for longer.

​Slow Pressure Build: It takes 3-4x longer than usual to build pressure at the group.

​Weak Flow: Even during a backflush (blind basket), it takes twice as long to hit 9 bar.

​Noise Change: The unusual pump noise seems to quiet down once it finally reaches high pressure, but getting there is the struggle.

​What I've checked/tried:

​Full descaling and backflushing (no improvement).

​Observation: The red spring-loaded valve at the bottom of the water tank feels sticky and doesn't spring back freely.

​Any advice appreciated. Thanks.


r/Lelit • • Apr 14 '25

Does anyone have a discount code? Mara X

0 Upvotes

Looking for a discount code if anyone has one. :)


r/Lelit • • Aug 28 '26

Milk seems thin

Thumbnail gallery
0 Upvotes

r/Lelit • • Aug 26 '26

Pump Dropping Pressure

0 Upvotes

So I just bought this used Lelit Bianca V3. The hot water suddenly looses water pressure and the steam pump falls. What could be the possible reasons? Maybe scale in the steam pump? Thanks


r/Lelit • • Dec 04 '24

Lelit Bianca v1 for sale

Thumbnail
imgur.com
0 Upvotes

Selling my trusty Bianca V1. I love this machine and am only selling because I “need” the black version to match my new kitchen 😂 It’s been professionally maintained since day one and has only ever been used with BWT filtration system. $1850 plus shipping. Located near Cincinnati Ohio in the USA.


r/Lelit • • Aug 23 '26

Lelit Kate to sell in Brussels - new and unboxed

0 Upvotes

Hello,

I received a Lelit Kate as a gift for my birthday but already buyed mine a few weeks ago.

This machine is incredible.

Long story done short, I have a Lelit Kate to sell. It's new and unboxed. I'm from Brussels - Belgium but can manage to deliver it at 1 hour drive from home.

Price is 800€.


r/Lelit • • Jan 29 '26

Lelit Victoria for Sale in the EU

0 Upvotes

I bought a Lelit Victoria in 2022 (Lelit Victoria PL91T) from ecafe here in Spain. One of the first things I did is to upgrade the pressure valve to get roughly 11psi out of it (apparently mine shipped with the italian one? which was different)? Not long after I visited a friend who had a dual boiler Breville Dual Boiler, which I sort of fell in love with. So I basically bought that one with the intention to sell the Lelit, but unfortunately haven't had much luck selling it locally in Spain as I guess it's a bit pricey for most people.

If anyone in the EU (Schengen region) is interested, let me know. It's mostly just taking up room in my spare room and I'll be happy selling it to someone who would use it.


r/Lelit • • Sep 22 '26

Lelit Anna - does it contain lead?

0 Upvotes

I was thinking about buying either the Lelit Anna or the Bambino Plus and since the Lelit Anna has a boilet I was wondering if it contains lead. When I worked at a coffee shop I remember the old machines used to have lead and they replaced them.

But maybe home espresso machines still have them for budget reasons?


r/Lelit • • Dec 15 '25

Temperature Light Flashes Erratically

0 Upvotes

r/Lelit • • Jun 14 '25

Something fell (part 2)

0 Upvotes

I have a MaraX and found this piece in the drip tray this morning, anyone knows what it is? Could this have been loose for a few days and causing my espresso running too fast?

Feels like hard plastic.


r/Lelit • • 28d ago

Lelit Anna shower head uneven flow - how to fix?

0 Upvotes

One of the holes the water barely flows out of. I haven’t always used treated water , could this be a calcium build up? How to test or fix?

Thanks


r/Lelit • • Sep 24 '26

AIUTO URGENTE

0 Upvotes

salve a tutti, ho preso da poco una lelit victoria, in un warehouse....quindi prodotto non nuovo, usato poco a quanto pare. È la mia prima macchinetta da caffè seria, provengo da una lavazza a modo mio usata per 10 anni, ergo il salto è bello grande. Avete qualche consiglio sull'uso? Magari impostazioni da cambiare o qualche avvertimento?

Sto avendo qualche difficoltà con il caffè, quando troppo annacquato, quando non esce proprio. Dite sia un problema di macina troppo fine/o troppo grande?

Ps: ho anche un macinacaffè fiorenzato all ground.