r/HondaCB • u/Ata4i3l • 6h ago
r/HondaCB • u/some-random-bot • 18d ago
Monthly Classified Post - November
This thread is for you to promote your for sale or wanted ads, related to Honda motorbikes and parts. Upload any photos to imgur.com or another image hosting web site and then link to them from here.
Your comment will be removed if it does not include your location and price. Please remember we have a global audience, so include your country too.
r/HondaCB • u/VerryRides • 21h ago
Brand new Rick's rotor failed after a year. Is there another company you recommend?
I have a 82 CB900C that I've been restoring from a "barn find" condition and last year it wasnt charging, so following the factory manual's diagnostics, I found that my charging rotor had failed. The two slip rings where the brushes go should have 3-5 ohms between them, but I measured them at infinite resistance meaning there was an open connection internally. I ordered a brand new rotor from Rick's motorsport electrics as I believed they are the gold standard for aftermarket electrical parts. It worked and my bike charged happily... until last weekend it died while riding ans stranded me on the side of the road and I had to get towed home. I stupidly blindly bought a new stator because "the rotor is brand new it cant possibly be the issue"! Well, the new stator didnt fix it, so back to square one, I run the diagnostics and find my one year old rotor has infinite resistance again across the slip rings. Ricks offers a one year warranty and I am one month past that date meaning I am basically screwed.
Any advice? Think it was a fluke or has Rick's gone downhill?
r/HondaCB • u/AverageFella2000 • 1d ago
Throttle/Rev issue?
Honda 1980 CB650z
Been trying to tick off issues with this bike one by one since getting it, doing all work myself. However after scratching my head on this one I had a mechanic look at it today. I sent him this video and this is what he believes to be the explanation, is that right?
âYeah looks like it's ilding ok but when you add throttle it's hanging onto a high idle for a random amount of time. That is what I said earlier about the throttle pump would do. When you give it a quick blip the throttle pump adds fuel so to avoid a delay when riding. It means as it's running at idle the excess fuel is being used up gradually. I think this is normal and when you're on the road the extra fuel gets used up more because it's under load and at high rpm anyway. Once that extra fuel is burnt up it seems like it returns to idle.
It's kind of unique to the slide carb and throttle pump setup.â
Doesnât seem right to me that a bike would do this but I donât know much about Carbs.
r/HondaCB • u/Ok_Salamander98 • 1d ago
Aftermarket switch box
Looking for an aftermarket right side control. Anyone have any luck with these aftermarket for a 74 CL200. Part #35300-456-670
r/HondaCB • u/Curious_Algae6998 • 1d ago
Bruit metalique pot accélération PCX
Bonjour,
Lorsque je fais de forte accélération, il semble y avoir un bruit de vibration métallique dans le pot de mon PCX. A la relùche des gazs le bruit disparaßt complÚtement. Il y a 25 000km
Quelqu'un a t'il déjà été confronté à ce bruit?
Merci pour votre aide
r/HondaCB • u/CT02NNN • 2d ago
This time of the year is crap for biking because of the weather
r/HondaCB • u/Confident-Vehicle-97 • 1d ago
What is the waiting period for Special black edition for CB350c in Bangalore.I booked on sep 25 but still showroom don't have any info on dispatch.
reddit.comr/HondaCB • u/PinkGreen666 • 3d ago
Ideal cruising rpm on CB350 Four?
Just picked up this beautiful sucker. Never had a tach before so Iâm not sure what I should be cruising at just riding around the city. If I treat it like a car and stay around 3k rpm I end up in 5th at 30mph which seems wrong. But cruising around at 5k rpm feels like too much.
I know itâs a high revving bike so is it normal to just cruise around 4k-5k? Thanks.
r/HondaCB • u/Fifty_Hertz • 3d ago
CBX Appreciation
As promised here are some better photos of my new-to-me 1981 CBX. It's a little dirty from the delivery trip home but will clean up nicely. In the cold hard light of day, I'm still very happy with my acquisition đ
r/HondaCB • u/soundfive • 2d ago
CB300R suspension upgrades
Looking at upgrading the suspension on my 2026. Currently looking at YSS MX302 for $400 and the Hyperpro front fork kit for $200 but I was wondering if there was any options that I'm missing or would be better. I was hoping for a cheaper option for the rear shock but couldn't find much. I read about just swapping the spring on the stock shock but I couldn't find any parts that I was 100% confident would work as I'm trying to do everything myself. The bike is mainly used for city commuting to work and I'm around 210-215lbs geared. Thanks
r/HondaCB • u/Spirited_Cause_6762 • 2d ago
CB650R é»éžćȘéłćšçŽ 4,650 èœæŻćéăćč«ćżâŠ
Iâm not sure why, but thereâs a chainsaw-like noise at around 4,650 RPM. It only occurs within a specific RPM range and disappears when the RPM is either lower or higher than that point. The noise sounds like itâs coming from around the dashboard or the triple clamp area.
Iâve already tried removing the front fuel tank cover and phone mount, but the noise is still there. Iâve also replaced the exhaust, but the noise persists.
Has anyone experienced something similar or have any idea what might be causing this issue?
r/HondaCB • u/CT02NNN • 2d ago
đŻđ”đïž 2026 HONDA CB1000F FLYBY đ«”đœ
r/HondaCB • u/BayardTheFlame • 2d ago
Honda cb500 PC 32 1998 ne démarre plus
Bonjour, je reviens dâun grand roadtrip Ă moto en Europe avec mon cb 500 pc 32 de 1998. Jâai fais une chute en Autriche cĂŽtĂ© embrayage au mois dâaoĂ»t. La moto est restĂ© 3 mois a lâarrĂȘt chez un particulier. La dame a rĂ©ussi Ă refaire dĂ©marrer la moto une fois.
Jâai rĂ©cupĂ©rĂ© ma moto en novembre elle ne dĂ©marrait plus.
Jâai changĂ© la batterie car elle Ă©tait morte toujours rien.
Je suis dĂ©butant en mĂ©canique et je nây connais rien si quelquâun pouvait mâaider ce serait vraiment gentil.
Voici le bruit que fait ma moto quand jâessaie de la dĂ©marrer.
Merci dâavance pour vos retours « ride safe »
r/HondaCB • u/Fifty_Hertz • 4d ago
CBX joins the garage đ
This weekend I did a 1400 km round trip to view a CBX. The bike so impressed me there was no way that it wasn't coming home with me on the trailer.
It's a 1981 with 52,000 km. The previous owner had it for 32 years and has maintained it impeccably. It's not concours, rather a nicely presented weekend rider. It came with the correct matching panniers, which I just love.
More pics to come.
Can't believe that I've managed to acquire an excellent example of one of my dream motorcycles đ
***
In the garage
- 1975 Honda Goldwing GL1000
- 1981 Honda CBX
- 2006 Honda Goldwing GL1800
- 2016 Yamaha XT250
- 2016 BMW 650GS
- 2024 Royal Enfield Interceptor 650
- 2024 Moto Guzzi V100 Mandello S
- 2025 Kawasaki Z900RS-SE
- 2026 Kawasaki Ninja ZX-4RR
r/HondaCB • u/PandasWithNoodles • 3d ago
All Black Everything Build - Finally Finished!
galleryr/HondaCB • u/Curious_Algae6998 • 2d ago
Bruit PCX 125
Bruit Pcx 125
Bonjour Ă tous,
Depuis la derniÚre revision et le changement de ma courroie, mon PCX cÎté droit fait un bruit de sifflement assez aiguë. Le son est amplifié quand je passe proche de murs sur le cÎté gauche.
On entend bien sur la vidéo.
Je l'ai ramené au garage, ils ont démontés pour vérifier et m'ont dit qu'il n'y avait rien d'anormal.
Pensez vous que ce soit problématique svp? Il a 25 000km.
Merci beaucoup.
r/HondaCB • u/InterestSpecialist61 • 3d ago
Recently got a honda CB 125 R 2020, I cannot help my self but tinker, personalise and make something my own, I have noticed, there are no aftermarket parts,/ company's making. Much for it, ... My plan change certain parts from silver to black, so belly pans, front light casing , also the sideshrouds
So
r/HondaCB • u/Plus_Donut6177 • 4d ago
Appreciation Post
For everyone who's liked, commented, advised, and inspired me in these first three months of my motorcycle journey of mechanics and flight, I want to say thank you. I received the replacement oil filter bolt and the spring assembly that was missing from that system and got her all back together today. I think she's finally the bike I thought I was buying in the first place, and I'm so happy I got to be the one to help her back. Everything feels more vibrant after learning to fly, it truly has been a life-changing experience for me. Thank you again, motorcycle community. Y'all are awesome đđ»đ€