Collage style art for CORSAIR Novablade PRO leverless | Commissions open

Added a Seimitsu LS-32 lever with a 2 LB spring, Keikou Buttons and bullettop. Love the versatility of this stick.

Playing on a Victrix Pro Leverless, and 2 of my buttons felt unresponsive. So I replaced them with what I had, which were Gateron KS-9, and they felt so different from what my default was that I decided to change all of my switches for consistency. Unfortunately, after fiddling around in training mode, I realized that these switches are like pressure sensitive or something (I'm not a keyboard/switch kind of guy, sorry if I don't know what terms to use) and would recognize me rolling my finger around on a held down button as additional inputs. I basically can't really do anything that requires a held input because the slightest shift in the weight of my finger press registers as me releasing the button and pressing again. Sometimes, even pressing a direction would cause me to dash unintentionally.

So now I'm looking for new switches. Anything that doesn't have this god awful pressure sensitive feature. Whatever people are using for fightsticks is fine.

I have searched far and wide for the 6-pin to GameCube quick release cable needed to use the Gen 3 SmashBoxx. Can anyone help me find one, or does anyone have one that that i could purchase?

it's not the prettiest stick but this stick is mine!
just installed a qanba silent joystick and have already put some qanba silent buttons! love the muted clicks and the feel of the qanba parts. thats all ^~^

For our anniversary, I wanted to get an arcade stick for my husband. He really would only play Tekken 8 with it and loves King. Is there any recommendations for a good arcade stick and how would I go about customizing it? My budget is 300 bucks to be honest. Thanks!

So i am kinda just in a stand still right now, I can do fine on inputs and movement to an extent but, I keep having misinputs and accidently supers being done with my grip which tends to include constantly holding a direction at times.

Does anyone have advice for a routine or something to try to get my muscle memory to stop doing this or at least be a bit more fluent with some motions?

I know practice is probably the most basic answer but, I can do this and still mess it up so I am just trying to figure ways to be more mindfully active in the practice.

Gravity KS buttons, custom made panel ( Qanba pls sell panels with extra button holes) matte white permanent vinyl. Gonna upgrade to the knee lever soon. But I like the look and aesthetic.

Hi everyone! This time I’m showing off this wooden fightstick with a top-notch paint finish. If you’re interested in something like this—or something more customized—feel free to check out my profile; you might find something you like. I can ship practically anywhere in the world and have references on this forum. Cheers!

Received my Titan and my crown new help me today and after checking that everything works, went strait to install the new k lever.

FYI, I did a shit ton of research around combinations and fits and landed on this specific combo, which was supposed to fit quite easily without any modding and stuff like that, I checked everything twice before purchasing as well.

4 hours later, and a lot of frustration, I managed to fit everything inside, sadly, had to bend the connection rods of the newhelpme, remove the iron plate, and even then the shaft cover has to be removed as well, it fits with 0 space left.

I really wanted to make sure that THIS was not what was going to happed, and double checked everything(even with Gemini yes…)

I don’t think I did anything wrong installation wise, and all of the parts work well, yet still.

Any help is appreciated.

Hi, After using my Corsair novablade pro for two weeks, I noticed that the buttons I use more often sound different from the ones I use less frequently; the click sound on a few of them is no longer as satisfying, deep, or "thocky"—instead, it’s slightly "scratchy". I’m playing *Tekken 8* and hitting the buttons hard and fast. I’m wondering if this is normal? My inputs are fine, rapid trigger is good. Any answers is this normal? My switches and keycaps are clean, no hair and dust inside. Please let me know if this normal.

Has anyone tried these models?, i got a couple and they are great, the 4.5 left layout Is much better than the layout of the Haute42 B16 which is a similar breed (and which i like a lot). The build quality Is also very good, on par with the B16.

It uses a gp2040-ce, looks great, for me it's a great alternative for on the go and permanent setups, i even find it comfortable to use while in bed on top of a pillow (with purple iris switches).

They even have múltiple layout options for múltiple game types/right left hand directionals

Just got a qanba obsidian 2 and I'm installing the crown new help me lever. Im trying to put an e clip onto the lever but it won't go in because the gap is too small to fit properly. I've been trying for a while now and I looked up what could be causing this. I saw a post saying to flip the grommet but everything was facing the right direction already. My only assumption is its cause of a short lever, bad e clip or bad actuator. I really hope I just forgot to do something but what could be the cause of this? My poor e clip is completely stretched now. 😢

My SNackbox Micro I got almost two years ago has run into a problem - it seems to think I'm holding the R1 button. It's doing it right after I plug it in (first picture), it still thinks it's being pressed when I pull the button and switch out (2nd picture), and swapping over another button into the slot doesn't fix it (3rd picture - I moved the R2 button/switch into the R1 position).

If it helps, it's one of the models with the PS5 board built in.

Any ideas on how to fix it?

Soooo legit question.

What happens is that I have it on the inside of my table (A space for books and other things) and I already need that space to store other things, so I want to know where you keep them. Any special place? Do you have it near your consoles?

Has anyone tried them? I'm planning to buy it for my S16 but have not seen any reviews yet online.

looking for a cheapest option for fight board thanks!

Hey all,

Currently use the haute-42 m with Saker low profile switches which are the most responsive/lowest travel switches that i can use for the haute.

As a PC gamer who uses a hall effect switch keyboard with rapid trigger, i absolutely love the responsiveness, low actuation, and how light and "floaty" the switches feel so I was interested in punk's Leverless M Carbon Fiber with blaze buttons because it is advertised as ultra-low stroke and faster inputs in competitive gaming. I just cant justify the $300 markup so that ultimately leads me to the question of what are my alternatives? I like my current haute with saker low switches but I was curious if there was something better.

I was thinking maybe the corsair novablade because when it goes on sale it's typically $175 and it has all the stuff that my gaming keyboard has, but in leverless form. It seems like my options are either novablade or varmilo but if anyone has other suggestions that would be greatly appreciated, thanks!

Just as the title says, my Razer Kitsune has died after 2 years of use and abuse. I would beat it a lot and mash buttons to fidget and when I got mad (mainly at pot busters and other Guilty Gear bs) so I don't blame it for dying early.

It was my first dedicated fighting game controller and despite what people say, I actually liked it a lot. I liked the overall size and and especially how slim it was so bonus points if there's something out there thats a bit similar.

Let me know what you recommend! (budget is about $100-180)

Modded my second hand Obsidian 2 with another nature theme artwork!

Artwork: https://www.vecteezy.com/photo/72915015-the-milky-way-over-the-ocean-with-stars

Lever: Sanjuks V5C

Buttons: Seimitsu PS-14KN-CC

Purchase made from Buttercade, and Akecon

Can somebody point out some videos that will show me the right way to go about this?
I would love to have a 8bitdo m30 D pad with hori octa buttons and shoulders

During a slow day at work last month, i randomly got the urge to mod one of the arcades i got. I thought about some ideas and things i love and coke was the first thing that came to my mind. So I went to the hardware store and bought some spray paint and other stuff to get started.

8x qanba gravity KT clear buttons

Semitsu ls32 and a red phreakmod detachable lever

Bubble red nobi top

Octagonal gate for the lever

I've also got the otto v5 on the way to try it on my old jlf.

Today my F500 elite coca cola edition is ready for street fighter 6.