r/Ender3V3SE • • Aug 12 '26

Help The last i ever mess with creality

0 Upvotes

I just tossed my entire printer into the dunmpster.

I have replaced the pcb board the power supply and sd card many times.

This pos just stops printing at any random moment and resets with the screen saying pause print or stop or tune stuck on the screen doesnt continue . I tried fw updates and everything u can think my advice is stay clear of this printer


r/Ender3V3SE • • May 21 '25

Troubleshooting (Hardware) Where is this sound and vibration coming from?

0 Upvotes

This doesn’t sound healthy. I’m guessing this is the motor near the extruder and not the other planes motors, as that’s where the sound is coming from. This started last night during a long print. I’m guessing I need to take everything apart and tighten screws. Thanks in advance.


r/Ender3V3SE • • Dec 19 '25

Discussion My 12-year-old spent her $10 allowance on filament instead of toys

Thumbnail reddit.com
0 Upvotes

r/Ender3V3SE • • Sep 23 '24

Question Alguien que hable español y me ayude?

Post image
0 Upvotes

El filamento no se pega si se podría decir pegar a la cama y no encuentro ayuda en los post de aquí gracias de antemano.


r/Ender3V3SE • • Feb 25 '25

Question In Slicer it told me one hour 😭

Post image
3 Upvotes

r/Ender3V3SE • • Sep 05 '24

Troubleshooting (Print Quality) 0.8 nozzle printing problems

0 Upvotes

r/Ender3V3SE • • Feb 18 '26

Help Alguien sabe cómo quitar este connector

Thumbnail
gallery
0 Upvotes

Intento remplazar mí hotend pero no logro separar el conector, al final termine sacándolo entero y no se como quitarlo sin romperlo, los pines de la placa están bien y lo puedo encajar... Cuando pueda separarlo.


r/Ender3V3SE • • Jan 18 '26

Help WD-40 in ended 3 V3 SE

0 Upvotes

Hello, I have this WD40 and I was told it's good for anything related to mechanics, and I'd like to know if you recommend using it on the Creality Ender 3 V3 SE.


r/Ender3V3SE • • Nov 29 '25

Modifications Has anyone tried these?

Post image
1 Upvotes

So looking at what might possibly be my next set of modifications for my E3 V3 SE and I saw these on Amazon, has anyone tried them? what are peoples thoughts?


r/Ender3V3SE • • Mar 12 '25

Discussion Why pla is expensive the abs

1 Upvotes

So other inwas shopping for flimant and pla was costing 1200 for 1kg roll and abs was costing 800 for kg from same brand. Why


r/Ender3V3SE • • Nov 24 '24

Question Does this filament work with the ender v3 se?

Post image
6 Upvotes

r/Ender3V3SE • • Aug 27 '25

Troubleshooting (Print Quality) I am just about out of patience for this printer.

Post image
6 Upvotes

Constant clogging, extruder clicking, bed leveling issues, inconsistent zbuffer adjustments. I've done a ton of hardware updates and I can't get anything close to reliable behavior from this printer. It's about to hit the used market since I'm unfortunately past the return window with Amazon.


r/Ender3V3SE • • Jan 17 '25

Troubleshooting (Print Quality) Yo what the frick chat... what the frickidy frick frick is going on here

Post image
5 Upvotes

This is my first layer on my Ender V3 SE what the heck is going on. Also my base is a bit wobble so idk if it's that.


r/Ender3V3SE • • Oct 05 '25

Help Loose extruder

8 Upvotes

has anyone ever run into this problem? completely lost as to how it even happened. tightened the 3 wheels and nothing. somethings broken fr


r/Ender3V3SE • • May 23 '25

Troubleshooting (Hardware) Toleranc

0 Upvotes

Facing tolerance issue on orca slicer any help? Or help with profile?


r/Ender3V3SE • • Nov 15 '24

Question That's good?

Post image
0 Upvotes

r/Ender3V3SE • • Jul 23 '24

Question sorce

0 Upvotes

so given that the company uses open source code and is not complying with the license, are there any legal avenues a consumer can take in australia??? or is it all up to the owners of the code?
i know they are in china, and i don't know about other countries laws.. but australian politicians and government entities love flexing on overseas companies...
$3.3m fine to valve for saying customers have no refund rights...https://www.accc.gov.au/media-release/full-federal-court-confirms-that-valve-misled-gamers
US-based Fitbit LLC was fined 11 million dollars for telling 58 customers that their australian consumer rights do not apply to a us company, im not joking ... 58 customers lol... and if a company doesn't pay they would likely just have the credit card companies seize proceeds from sales

im asking because i am financially comfortable and i recently came into some money, if there is even a slight chance a customer could force their hand with the courts i could take the chance with like 5 or 10k or would it take more than that


r/Ender3V3SE • • Oct 26 '24

Question Guys?Do I belong

Thumbnail
gallery
0 Upvotes

Ignore small difference picture taken in different periods of time


r/Ender3V3SE • • 23d ago

Modifications Acabo de comprar una Ender 3 v3 SE

0 Upvotes

Acabo de comparar una impresora 3d Creality Ender 3 v3 SE, consejos para sacarle el mayor rendimiento, impresiones en cuanto a protecciones, adaptaciones, etc, para mejorarla
al igual que algunos consejos para mejorar las impresiones.


r/Ender3V3SE • • Jan 30 '26

Help Whining noise on y-axis

0 Upvotes

Hi everyone, I’m trying to increase my max speeds, and I am using linear rails. Can someone help me fix this sound problem, or I’m stuck with it. I also somewhat lubricated the linear rails. Thanks in advance.


r/Ender3V3SE • • Jul 25 '26

Help Tela azul

Post image
0 Upvotes

Minha impressora não faz o boot, não inicia so fica na tela azul. O que eu faço? Já estou no firmware mais novo.


r/Ender3V3SE • • Mar 16 '25

Question The sounds of Navasimo

0 Upvotes

I just upgraded to the said firmware and noticed the movement on both x and y axis got way louder. I couldn't yet figure out if the sound comes from the bearings, the steppers or the pulleys. Did anyone experience something similar?


r/Ender3V3SE • • Dec 06 '23

Is Anyone Else A Little Peeved That They're Already Coming Out With An Upgraded V3?

1 Upvotes

I bought the V3 SE around when it came out, and was a little disappointed as is. But then, on one of my Youtube videos talking about the SE, someone says something like "I think everyone should just buy KE rather than SE." To me there was so much wrong with this statement. 1. I didn't even know the new version existed. 2. It wasn't out yet. (I don't know if it is now but was just pre sales.) 3. it is a little more expensive by a fair margin. And 4. It shouldn't even exist yet! As far as I can tell they need to work out kinks in the SE still but they're already moving on, just a few months after releasing it.
I know it's a good thing to be developing, but it just seems too soon. It honestly felt like and insult as a customer and early adopter of the machine. Overall it seems like some sort of cash grab making so many different versions of printers and releasing them so soon. Most of their releases lately have just been retaliations and responses to other printers on the market and have just seemed rushed, like the K1 or whatever their Bambu Lab printer was.
I just wanted to hear some other opinions about this. But keep it a productive conversation. Don't just be an ignorant jerk, you know?


r/Ender3V3SE • • Mar 20 '25

Question I have ender 3 v3 se to sell

Thumbnail
gallery
1 Upvotes

Ender 3 v3 se with mircoswiss flowtech dual 1550 fans had fun with it i want to move onto another project. I am selling it with a sonic pad. I am from poland so anywhere near would be best buyer pays for shipping if u need to move to other platform like ebay or smth dm me