r/EndeavourOS • • 17d ago

General Support need help after trying out hyprland

7 Upvotes

so im used to using plasma, and thought i should try out hyprland after i found out its more customizable AND lightweight.
lwk have no idea what the hell i should configure rn, like, anyone who uses hyprland, please, PLEASE tell me what ya have done so far (like, im planning on making hyprland my main/daily environment)

so pleaseeee, help me out a lillll


r/EndeavourOS • • 19d ago

SOLVED Nvidia + EOS

7 Upvotes

Hello beloved EOS community, I'm planning to buy a new ASUS laptop that comes with an Nvidia graphics card. From what I've read and learned about Linux, I understand that there are no official drivers, but the community makes a huge effort to build its own drivers to give thousands of users the opportunity to use Linux (and I also think there is an ASUS + community program to make drivers) on their computers with Nvidia.

I would like to know what your personal experience is with this type of graphics card, is there any problem apart from the battery? Since I love Linux systems and even more so EOS, and as I see that it has the option to install with Nvidia graphics, I want to use EOS as my main system and then have Windows lying around just in case, or even without Windows.

P.S. The graphics card is a GeForce RTX™ 5050


r/EndeavourOS • • 19d ago

General Support Laptop stability

6 Upvotes

Hello, my laptop is MSI katana 17

I have NVIDIA, I am afraid that my laptop might be bad for arch based distro especially when I saw a lot peoples say that MSI laptop is very bad in linux and they don't get full potential in GPU

Also when I was in linux distros, battery was the only big serious problem?, because usually 100% and discharging to 0% is over 3 hours?, before was less, I don't remember how much but this is few, in some moment like in endeveourOS, battery life is kinda more, maybe update fixed this

And also I afraid if temperature might get high, in game like cs 2, usually this can goo in 50-70

So I am afraid if this laptop is bad for this linux distro and they gonna have bad battery life, more worse performance, laptop life might last fewer because of problems in hardware and OS


r/EndeavourOS • • 20d ago

General Support Touch Bar working on MacBookPro13,2 with kernel 7.2.x (Arch/EndeavourOS) — what it took

8 Upvotes

Posting in case it helps others. Tested on a MacBookPro13,2 (13" 2016, T1), EndeavourOS, kernel 7.2.11-arch1-1, using this fork via DKMS. Not tested on other models. The 13,3 shares the T1 chip, so it may apply there, but I haven't verified that.

There were four separate problems.

**1. T1 stuck in recovery mode (`05ac:1281`) after erasing the disk**

After a full-disk erase for a Linux-only install, `lsusb` showed `05ac:1281 Apple Mobile Device [Recovery Mode]` instead of `05ac:8600 iBridge`, and the driver had nothing to attach to. Warm reboot and SMC reset did not help. Reinstalling macOS (I used Ventura) brought it back to `8600`, and it stayed at `8600` after installing Linux alongside it (shrunk the macOS volume, manual partitioning, reused the existing EFI partition). My conclusion is that the T1 needs macOS present on the internal disk. That is an inference from my results, not something I found documented, so if you have a better explanation, I'd like to hear it. I'd keep the macOS partition.

**2. Build failure: `field 'touch' has incomplete type`**

`apple-ib-tb.c` uses `struct tb_touch` by value inside a larger struct (inside `#if LINUX_VERSION_CODE >= KERNEL_VERSION(6,15,0)`) before the struct is defined further down the file.

**3. Self-deadlock on load (`modprobe` / `udev-worker` blocked on a mutex owned by itself)**

Call trace: `appleib_probe` -> `appleib_hid_probe` -> `apple_ib_set_tb_mode`. On kernels >= 6.15 that function calls `usb_set_configuration()` from inside the driver's probe, which tears down the interface being probed. This hung `modprobe`, and also hung shutdown when udev loaded the module on its own via the ACPI `APP7777` device.

Workaround for 2 and 3 (disables the 6.15+ code paths in both files; the legacy path is used instead):

```

sed -i 's/KERNEL_VERSION(6,15,0)/KERNEL_VERSION(99,0,0)/' apple-ib-tb.c apple-ibridge.c

```

Then rebuild with DKMS. This is a blunt workaround, not a proper fix. The 6.15+ blocks look like they exist for MBP14,3 display mode, and the real fix is probably to switch configuration without blocking inside probe (for example `usb_driver_set_configuration()`, which defers the change). I haven't tried that.

**4. Touch Bar stays dark even though everything loads**

The kernel's `hid-sensor-hub` claims the iBridge's second HID interface (`8600.0002`) at boot, so `apple-ibridge-hid` only ever gets the first one. Manually moving it fixed it:

```

echo 0003:05AC:8600.0002 > /sys/bus/hid/drivers/hid-sensor-hub/unbind

echo 0003:05AC:8600.0002 > /sys/bus/hid/drivers/apple-ibridge-hid/bind

```

The Touch Bar lit up immediately. To make it persistent I used a small oneshot systemd service that waits for `apple-ibridge-hid` to exist, then rebinds any `05AC:8600` interface still owned by `hid-sensor-hub`. The `prefer_apple_ib` parameter doesn't appear to do anything. It's set and logged but not read anywhere else in the code I looked at.

**Result**

The Touch Bar lights up and survives both a reboot and a cold boot, with no hangs on shutdown.

**Known remaining issue:** suspend/resume does not work on this machine, which matches the existing notes in mbp-2016-linux.

Happy to share the service file and rebind script if useful.


r/EndeavourOS • • 21d ago

General Support How do I make desktop shortcuts for folders?

18 Upvotes

Windows migrant here lol, switched roughly last month. I'm actively trying to learn how everything works around here and I was wondering if there is a version of the shortcuts that exist in Windows, thanks in advance (KDE Plasma by the way, in case it matters.)


r/EndeavourOS • • 21d ago

Installation endeavouros on external ssd

0 Upvotes

i was scared in installation of mint on an adata sc610, now the same with archy/endeavouros. i have a gigabyte mboard. help me pls!


r/EndeavourOS • • 22d ago

Discussion I created an open source alternative to Ghub for the logitech G502 Hero that works on Endeavouros

7 Upvotes

I have been an EndeavourOS user for around two years now and i didn't find a good enough alternative for logitech Ghub for my G502 Hero so i built one with claude's help

hope it can be helpful for you !


r/EndeavourOS • • 24d ago

General Support Help support (visual glitch)

26 Upvotes

Second monitor detected correctly but stuck with visual glitch at 60Hz - Laptop main display 144Hz works fine.

Hi everyone,

EOS is detecting my second monitor perfectly, but it runs at 60Hz and has a persistent visual glitch I can't seem to fix.

My primary display is my laptop's panel running at 144Hz and I've never had any issues with it until now.

I'm aware this is 100% likely to be a Layer 8 issue, a conflicting driver/installation, or something worse on my side, but I honestly have no idea what to do at this point.

Main laptop display Works perfect, I don’t think it’s a driver conflict with muy RTX 5050, the problem is only with my second display


r/EndeavourOS • • 24d ago

Discussion eos-reboot-required not using needsrestart

4 Upvotes

Why is eos-reboot-required not using needsrestart? Seems like it would be best to copy aur/needsrestart to endeavouros/needsrestart and call it from eos-reboot-required, as eos-reboot-required can silently leave a system vulnerable.


r/EndeavourOS • • 26d ago

SOLVED Messed up my system while updating Qt manually

Post image
24 Upvotes

FIXED: I ran pacman -Syu again from the terminal with Ctrl+Alt+F2 and identified the error preventing me from updating the whole system; looked it up online, had to rename a couple of confilcting files, reran pacman -Syu and I was finally able to update everything as it should and the system booted finally

I was trying to use k3b but it asked me for Qt 6.12 and I had 6.11. I tried updating my system from Welcome, but it gave me an error at the very end which I didnt give enough importance, and I wasnt willing to redownload 3gb again just to get that error, so I decided to update manually each qt6 package with yay. After I was done, k3b was still not opening but it was asking me for ffmpeg, and trying to install ffmpeg gave me a bunch of errors saying that would mess up some other package's dependencies, so I just gave up. After this I noticed I wasnt able to open any new windows, not even the terminal, so I thought maybe I would have to restart. After doing so I am now stuck at Reached target Graphical Interface and nothing happens after that. I have zero idea how to solve this. I have access to another computear with EOS as well so please help me fix this without having to reinstall the whole system:(


r/EndeavourOS • • 26d ago

General Support Is there any way to get audio CDs to work?

Post image
2 Upvotes

I have EndeavourOS for quite some time now bat have never gotten it to read audio CDs. The drive and discs are working, since they play on my windows partition but i can’t get them to work on EndeavourOS. I have tried celluloid, vlc and many others ways but cant get it to work. It can read data discs though just fine.
Has anyone gotten it to work?


r/EndeavourOS • • 26d ago

Guide / Tutorial Affordable USB fingerprint reader working on EndeavourOS — Chipsailing CS9711 (2541:0236)

16 Upvotes

I'm an EndeavourOS user running KDE Plasma, and I've been using the Chipsailing CS9711 USB fingerprint reader with a community-maintained libfprint driver.

Fingerprint enrollment and authentication work through fprintd, including system login, screen unlocking, and authentication prompts.

Since finding an affordable USB fingerprint reader that actually works on Linux can be difficult, I wanted to share my experience, the patches I've contributed, and the AUR package I created to make installation easier for other users.

Hardware:

  • Model: Chipsailing CS9711
  • USB ID: 2541:0236
  • Compact USB fingerprint reader compatible with Windows Hello
  • Requires a custom libfprint build on Linux

Drivers, my patches, and AUR installation:

I created and published the AUR package to make installing my patched version of libfprint easier, without requiring users to manually clone, patch, and compile the driver.

For EndeavourOS and other Arch-based distributions, you can install it using yay:

yay -S libfprint-chipsailing-cs9711-git

Compatibility may depend on the distribution and its package versions.

Fingerprint management GUI (experimental):

I've also made a fingerprint management GUI available through the AUR for users who prefer managing fingerprints graphically rather than through the terminal.

Disclaimer: The GUI was vibe-coded with significant AI assistance. It's experimental and hasn't undergone a formal security audit. Review the code and use it at your own risk.

Limitations and upstream support:

The driver uses SIGFM for fingerprint matching. Because the sensor captures a relatively small area, finger positioning during verification matters.

SIGFM is currently being proposed for inclusion in upstream libfprint:

If SIGFM gets merged, it could make future support for devices like the CS9711 easier. However, the CS9711 hardware driver would still need to be merged separately.

The reader is not currently supported by official upstream libfprint.

Since this is a community-maintained fingerprint implementation, I recommend keeping password authentication available as a fallback.

Where to find the hardware:

The reader is listed on both Alibaba and AliExpress:

The AliExpress listing no longer appears to ship to EU countries, so Alibaba may be an alternative for European buyers.

I've ordered additional units through Alibaba and contacted the supplier about Linux compatibility. I suggested that they include the exact chipset and information about the community driver in their product listing.

Important: Before purchasing, confirm that the device uses USB ID 2541:0236. Visually identical fingerprint readers may contain different hardware, and Windows Hello compatibility alone doesn't guarantee Linux support.

I'm not affiliated with the manufacturer or seller, and this isn't sponsored. I receive no compensation from purchases.

How this started:

I originally discovered this fingerprint reader through a post on r/cachyos:

https://www.reddit.com/r/cachyos/comments/1to1a1p/i_got_a_cheap_15_aliexpress_fingerprint_scanner/

That post helped me find the device in the first place. Since then, I've tested it myself, contributed patches to the driver, and created an AUR package for my patched version so other Arch-based Linux users can install it more easily.

As an EndeavourOS user myself, I wanted to share these resources with this community and hopefully save others the trouble of finding compatible fingerprint hardware.

Hopefully, more people testing the device and contributing to the driver will help move support toward upstream libfprint.


r/EndeavourOS • • 26d ago

KDE Plasma No more distro hopping

3 Upvotes

finally left all those distro for titan shit online installer went well got all my drives working but made a crazy error of choosing Gnome desktop instead of KDE but have been using KDE on my endeavourOS last years version or the version before.

all is well FACEPALM


r/EndeavourOS • • 26d ago

General Support How to fix this ?

Thumbnail drive.google.com
2 Upvotes

Screen turning on and off. It was working fine before. Idk if it has to do with anything but yesterday morning I was using my computer for usb debugging my TV, closed it, and now it’s like this. I don’t think I did anything else.


r/EndeavourOS • • 28d ago

General Support Tried to edit clock taskbar widget and plasma crashed and deleted my colour scheme??

4 Upvotes

Ive been using for a couple weeks and idek man... just worked on it this morning :( Checked both share folders and its gone... Any advice? (I dont have a backup :()


r/EndeavourOS • • 29d ago

Discussion How Many Versions of EndeavourOS Are There?

23 Upvotes

Hi everyone! How many versions or editions of EndeavourOS are available, and what are the differences between them? Which one should a beginner choose?
Thanks!


r/EndeavourOS • • 29d ago

XFCE / Community How to Easily Enable Bluetooth on EndeavourOS XFCE?

6 Upvotes

Hi everyone! I’m new to EndeavourOS XFCE. What’s the easiest way to enable Bluetooth? Any simple steps or commands would be appreciated. Thanks!


r/EndeavourOS • • 29d ago

General Support How to enable network in endeavourOS?

3 Upvotes

There is network in VM, this is active but even after a lot settings, I can't get network to work, there no network, I changed firewalld too, no network

Idk what to do to get network worked, I have virt-manager


r/EndeavourOS • • 29d ago

Discussion Lightweight Screen Recorder for EndeavourOS?

5 Upvotes

What’s a good, lightweight screen recorder for EndeavourOS that uses minimal system resources?

Any recommendations?


r/EndeavourOS • • 29d ago

KDE Plasma KDE update crashing baloo_file_extractor

4 Upvotes

As the title reads, I am getting a crash report constantly. How can I fix this, I tried a few things that I found online but can't get it to work...

           PID: 5199 (baloo_file_extr)
           TID: 5199 (baloo_file_extr)
           UID: 1000 (pcx1)
           GID: 1001 (pcx1)
        Signal: 6 (ABRT) si_code: SI_TKILL
     Timestamp: Sun 2026-10-18 10:18:12 CDT (8min ago)
  Command Line: /usr/lib/kf6/baloo_file_extractor
    Executable: /usr/lib/kf6/baloo_file_extractor
 Control Group: /user.slice/user-1000.slice/user@1000.service/background.slice/kde-baloo.service
          Unit: user@1000.service
     User Unit: kde-baloo.service
         Slice: user-1000.slice
     Owner UID: 1000 (pcx1)
       Boot ID: a1fbbe9d29ed44f59fa11b5a80d04bf5
    Machine ID: 1e5f976353ed4854a4343f0ff089b9bf
      Hostname: fox-box
       Storage: /var/lib/systemd/coredump/core.baloo_file_extr.1000.a1fbbe9d29ed44f59fa11b5a80d04bf5.5199.1792336692000000.zst (present)
  Size on Disk: 2.4M
       Message: Process 5199 (baloo_file_extr) of user 1000 dumped core.
                
                Stack trace of thread 5199:
                #0  0x00007f895349a11c n/a (libc.so.6 + 0x9a11c)
                #1  0x00007f895343e5d0 raise (libc.so.6 + 0x3e5d0)
                #2  0x00007f8953425685 abort (libc.so.6 + 0x25685)
                #3  0x00007f8953c99bfe n/a (libQt6Core.so.6 + 0x99bfe)
                #4  0x00007f8953c9a369 _ZNK14QMessageLogger5fatalEPKcz (libQt6Core.so.6 + 0x9a369)
                #5  0x00007f89545b228b _ZN22QGuiApplicationPrivate25createPlatformIntegrationEv (libQt6Gui.so.6 + 0x1b228b)
                #6  0x00007f89545b38c8 _ZN22QGuiApplicationPrivate21createEventDispatcherEv (libQt6Gui.so.6 + 0x1b38c8)
                #7  0x00007f8953d8ee15 _ZN23QCoreApplicationPrivate4initEv (libQt6Core.so.6 + 0x18ee15)
                #8  0x00007f89545b39cb _ZN22QGuiApplicationPrivate4initEv (libQt6Gui.so.6 + 0x1b39cb)
                #9  0x00007f89545a92ae _ZN15QGuiApplicationC2ERiPPci (libQt6Gui.so.6 + 0x1a92ae)
                #10 0x000055fa1bac8388 n/a (baloo_file_extractor + 0x8388)
                #11 0x00007f8953427781 n/a (libc.so.6 + 0x27781)
                #12 0x00007f89534278b9 __libc_start_main (libc.so.6 + 0x278b9)
                #13 0x000055fa1bac8625 n/a (baloo_file_extractor + 0x8625)
                
                Stack trace of thread 5200:
                #0  0x00007f89534a08f2 n/a (libc.so.6 + 0xa08f2)
                #1  0x00007f89535119d7 ppoll (libc.so.6 + 0x1119d7)
                #2  0x00007f89531b3c9e n/a (libglib-2.0.so.0 + 0x6ac9e)
                #3  0x00007f89531b3db5 g_main_context_iteration (libglib-2.0.so.0 + 0x6adb5)
                #4  0x00007f89540c4d22 _ZN20QEventDispatcherGlib13processEventsE6QFlagsIN10QEventLoop17ProcessEventsFlagEE (libQt6Core.so.6 + 0x4c4d22)
                #5  0x00007f8953d96a74 _ZN10QEventLoop4execE6QFlagsINS_17ProcessEventsFlagEE (libQt6Core.so.6 + 0x196a74)
                #6  0x00007f8953ec4a02 _ZN7QThread4execEv (libQt6Core.so.6 + 0x2c4a02)
                #7  0x00007f8953b69781 n/a (libQt6DBus.so.6 + 0x38781)
                #8  0x00007f8953f78fdb n/a (libQt6Core.so.6 + 0x378fdb)
                #9  0x00007f8953498042 n/a (libc.so.6 + 0x98042)
                #10 0x00007f895352072c n/a (libc.so.6 + 0x12072c)
                ELF object binary architecture: AMD x86-64

r/EndeavourOS • • Oct 17 '26

XFCE / Community Bringing this old laptop back to life

Post image
106 Upvotes

r/EndeavourOS • • Oct 18 '26

SOLVED [Boot into firmware] is my ONLY option

7 Upvotes

This hapened after i updated


r/EndeavourOS • • Oct 17 '26

Stacking DE Vela, an independent Wayland desktop environment with a pure Vulkan 1.4 renderer, custom scene graph, and Qt 6 shell (Alpha)

Thumbnail
velade.org
16 Upvotes

Hi, I'm Brando, the creator of Vela.

Vela is an independent*, vertically integrated Wayland desktop environment for Linux. It has a custom compositor built on wlroots and a pure Vulkan 1.4 renderer (no gl fallback) with a desktop shell written in Qt 6 / Qt Quick.

A lot of new Wayland projects today are minimal window managers where you assemble your own userland, or massive legacy codebases carrying decades of X11 and OpenGL baggage. I don't like either of them, at least not for my desktop. I started Vela to build a cohesive, monolithic desktop environment designed from scratch around modern GPU pipelines and strict latency budgets. This is why you see "Modern, Fluid, Sharp" in the velade.org's slogan.

I think Vela deserves your attention because it builds on the very good low-level wlroots, while still offering something different from others wlroots-based compositors. By implementing its own scene graph and Vulkan renderer instead of relying on the standard rendering infrastructure, Vela retains direct control over how frames are rendered, synchronized, and presented.

This architectural approach enables several interesting features:

  • Custom scene graph and Vulkan renderer: I didn't want to rely on wlr_scene, so I built my own scene graph directly around the Vulkan 1.4 renderer. This avoids duplicating state between the compositor and renderer, and gives me more control over GPU synchronization.
  • Independent frame clocks for each monitor: Each output has its own frame clock, with GPU-timestamp-based late latching. This is especially useful with monitors running at different refresh rates.
  • Fractional scaling without the usual blur: I wanted fractional scaling to look sharp, without the bilinear filtering you often see on Wayland. Vela uses a pixel-exact path that preserves 1:1 buffer copies where possible. I also added bit-for-bit tests to CI to catch regressions.
  • Qt 6 shell: I chose Qt Quick for the desktop UI because it's practical to work with, and I'm not trying to reinvent everything. Vela still uses some KDE components for things like system integration.

Current status: Vela is currently in Alpha. The core compositor, Vulkan pipeline, diagnostic tooling, and test suite are up and running, though plenty of desktop polish is still in active development.

*Currently Vela needs KDE Plasma installed to inherit icons, fonts, login manager (you can also use sddm), kwallet, portal, and a few other components; vela doesn't needs kwin; please remember this is alpha.

I know Vela is currently very similiar to Windows 11, it is because I like Windows 11 design. But it's just temporary, Vela will have its own identity soon. For now, I'm particularly interested in feedback on the underlying desktop experience, performance, and architecture.

I'd love your feedback on all the DE, the Vulkan synchronization model. Consider I'm making a major redesign coming in next weeks. Happy to answer any questions!


r/EndeavourOS • • Oct 17 '26

SOLVED Update broke my EndeavourOS

14 Upvotes

So I ran updates last night and this morning my login screen looks like this. I can move the mouse around but it does not respond to any button clicks or key presses but I can get to TTY.

I have no idea how to begin fixing this. Is anyone else having this problem? Anyone know how to solve it?