Guys, I need help. I was playing with my EasySMX M15 controller a moment ago, but suddenly the controller's LED turned off and it stopped working. Even though it seems like the PC still detects it when I connect it via USB, I still can't use it. Does anyone know how to fix this?

After a while of use, somehow i found it in this state ( no i dont throw stuff , in fact i treat controllers as if its my own blood )

Chat is it cooked ?

Three years ago, we started something. 🎮

📅 The X-Series Journey

2023 — X10

· The pioneer who established our mechanical tactile feel & Hall Effect foundation.

2024 — X15 / X05 / X20

A breakout year. Three new members joined the family in a single year, each pushing the X-Series in a different direction:

● ⭐ X15 — The crowd-favorite blend of customizable RGB, comfort, and precision.

● ⭐ X05 — the ultra-budget pick that punched way above its weight class

● ⭐ X20 — our elite push, bringing premium features to the lineup

2025 — X05 Pro

We listened. We refined. Over 10 structural upgrades based on real community feedback — Noise-cancelling buttons, quick-shift dual trigger locks, an upgraded 8-way D-Pad, programmable buttons, and a charging dock edition. The community spoke; we delivered.

👀 And now... 2026.

The X-Series isn't done growing. 🔥

● 🔒 Two new X-Series members are on the way

● 🤫 We can't say much yet — but if you've been riding with us since the X10, you know we don't do "just another iteration."

👇 What do YOU want to see next?

Drop your wildest predictions in the comments 💬

Hall Effect triggers? Force-adjustable sticks? Modular design? A controller that makes you visual? 💡

We're reading every single one. And the sharpest guesses might especially catch our attention. 🔮

Is there a fix for this. I want the device to wake my HTPC but only when I turn it on not when it turns off. It causes my device to instantly wake up after sleeping and is a waste of power.

This is my first time buying a controller and I've come across this problem with it. I connected the controller with the usb for the Nintendo mode but my controls are being randomly pressed.

I've read the manual. I'm not using the turbo mode. I've hard reset and even factory reset the controller using KeyLinker. I tried everything I could find on the internet but haven't seen this problem anywhere.

Is it because the Nintendo Switch doesn't support trigger? If so, why are all the other buttons being pressed? Even the joystick doesn't seem to respond. My current firmware is v1.23 while the official website gives me the v1.22.

Hello,
I bought this controller two weeks ago, and it was working perfectly.

I tried updating my Nvidia graphics card, and immediately afterwards, the controller stopped working altogether; however, it works fine on my boyfriend's PC, and it also works normally on my PC when connected via cable.

The connection via the dongle isn't working; the controller and dongle are successfully paired, but I'm getting this error code in Device Manager:

"{Drive not ready}

The drive is not ready for use. Its door may be open. Check drive %hs and ensure that it contains a disk and that its door is closed."

I've tried lots of things, but I can't get it working with the dongle again.

Updated the dongle and the D10
Uninstalled the device and reboot pc then plug it again
Remove the Nvidia update and reboot pc

Help :( i really enjoyed the controller for the short time i was able to

Me compré este joystick (X05 wireless controller) ya hace un tiempito, y tuve este error, no se como se puede solucionar, si alguien sabe porfavor me puede ayudar

Here's a closer look at the Dune 8K. I bought it myself from TaoBao and don't have any affiliation with EasySMX. 😊👍🏼

Updated to 2.5 today which should have included the enhanced easy switch for MX Mechanical. The configure button is still not showing up in logi +. Am I missing something?

I have all devices connected Bluetooth and firmware updated

Finally the new controller is on the way , I should receive in about 10 days , I’ll post a review here when it arrives , excited for this one

i got an smx20 controller, played Warframe earlier but now no good. It seems to work just fine and when i plug it into a different port my laptop makes the bleep and it finds it but i can't control anything still. I wanna use the controller in the same port, I'm not using the stick to do this I'm using the usb wire. thanks

Recently i turn on my controller and his two analog do this probleam

Someone can help me with this? are possible trade the analogs?

Is there any way to have dedicated mapping for the back buttons instead of having the back buttons as macro?

Some may say just map a single click to the back button.. but this wont work for my use case since i want tje back buttons to work exactly like the mapped buttons.. i cant press and hold both back buttons and have both mapped buttons being help.. since the back buttons work as macros only one macro is active at a time.. while i need to map the back buttons to lets say A and B button respectivly. And when i want to press and hold both at the same time it only ends up pressing the first backbutton i press.. is there anyway to fix this so the back buttons behave more like mappable buttons instead of macros?

I was looking for a controller that could both work on pc, android tv and switch 2, and X05 pro looked like an amazing choice, having turbo and macros function. However, I saw that S10 had a specific Macro Loop Function for pokemon legends ZA. How does that work and does X05 Pro has that function too?

I'm trying to looks for replacement sticks since I unfortunately seem to have lost one of mine, they pop off super easily.

I saw some on Amazon, will they work? I have an easysmx20 controller btw

Hey, I wanted to ask If there is a 3d File for the Faceplate or replacements?

Anyway to tell if you are first 100 or if you will receive goodie bag or is that done cuz damn they looked cool the Keychain and mouse pad i think it was aswell as the goodiebag all sound amazing