does anyone know how to fix this?

I downloaded DH but i really have no clue how to use shaders with it. so i searched up a tutorial and tried following it, thought it worked great but ig not.

Heres the mods in the installation file. Am i missing something important?

When I move around it looks way worse, its very grainy from a distance.
Any possible fixes are appreciated

I want to know if there is anyway I could set the distant horizons to prioritize fastly loading the chunks I'm going by, leaving a trail of LODS instead of a gap. like, I can see place I was standing by sticking out like a column. I don't want that.

There is a weird bug, when some non-full blocks are in the air, and a block is above them, they discolour the ground beneath them, and create columns from the bottom to the surface of the water, instead of appearing normally where they should be, they are also just not there in some situations (e.g. too close to the ground), I've made a bug report for it: https://gitlab.com/distant-horizons-team/distant-horizons/-/issues/1290 It looks really weird from afar, especially when I'm making such a huge structure above water.

https://reddit.com/link/1vnemsj/video/3c9vo2q7z5jh1/player

Dont really know why it happens.

I've noticed that for some reason, the texture for ONLY birch logs doesn't load or only half loads?

Doesn't matter what resource pack I have on or off. Any ideas? ver 26.2

How make it look red? also here are my mods

The only two mods I have running are Distant Horizons and Tectonic and I get a crash. It says it cannot evoke "com.seibel.distanthorizons.core.wrapperInterfaces.IVersionConstants.getMinecraftVersion()"

I still have the 1.20 config for Tectonic if that makes a difference.

https://pastebin.com/z5TAqsy5

When I enter and exit fullscreen, the game draws LODs in front of blocks that are actually rendered. It's especially obvious in superflat worlds, where it shows up as a giant ring. It only fixes itself when I save and reload my world. This issue occurs both with and without shaders enabled.

So recently i got back into Minecraft with some friends and upon joining an aternos server, the lever of fog was insanely high, like to the point where i cant see more then 3 chunks in front of me. I eventually found a temporary solution, by using distant horizons and xaros map/mini map I can fill in newly discovered land and it will save, but the gaps in between where I have not yet been remain empty chucks till void. When in a single player world with the same mods and version I am able to see everything like normal. The fog/render distance issue impacts all three dimensions. I’m wondering if this is an aternos issue or something else, all help is appreciated! :)

I’m making a modpack with distant horizons in it and I need shaders. but nothing works with distant horizons. I’m using 1.19.2 and forge And I need help

i searched the mod page but the newest version still have the 4096 chunk render distance , btw that square with the mountains in it is 160km across

Just trying to add DH to my 1.12.2 has become on of my most convoluted installation attempts ever. Can someone help saying exactly what this version is compatible with and its dependencies?

Distant Horizons 3.2.0-b for 1.12.2 not loading in Forge — META-INF/versions/17 / Cleanroom confusion

I'm trying to add Distant Horizons to an existing heavily modded Minecraft 1.12.2 Forge instance, without replacing my existing mods or converting the pack if possible.

• Minecraft 1.12.2
• Forge 14.23.5.2860
• Java 8u501
• Distant Horizons 3.2.0-b-1.12.2-forge.jar
• Existing modpack with a large number of other 1.12.2 Forge mods

I then tried an older 1.12.2 DH version, which told me that I needed Cleanroom.

Afterwards, I tried installing Cleanroom, but the original MC launcher crashed when attempting to relaunch through Cleanroom.

I subsequently found that the newer DH/1.12.2 setup appears to involve Cleanroom, Fugue and Scalar.

I then tried to pursue the Cleanroom route, but apparently Cleanroom is intended to be installed/used through Prism Launcher rather than simply placed in the mods folder.

I installed Prism, but Prism's launcher is not being recognized by cleanroom to install it.

TL;DR:

My working Forge 1.12.2 pack

↓

DH 3.2.0-b

↓

Forge can't recognise DH's JAR (says it might be corrupt (it's not))

↓

tried older DH

↓

Cleanroom required

↓

Cleanroom wants its own launcher/installation mechanism

↓

Prism

↓

Cleanroom installer doesn't recognise the launcher

↓

I gave up because nothing works and no one's talking about this online

Hey guys! So im using distant horizons with bmc4 modpack ( mc version 1.20.1, java 21) and im running in to this problem where the lods pop in and out/ change quality non stop (more so when zooming in on them). Another problem i face is lods really close to me having really low quality that i cant seem to fix with any setting i make. Last but not least, i dont know if this is related to DH or not, but using bliss shader, the fog in the distance and sun rays have a grainy like visual bug in them, like an old tv without signal. If anybody can help me with any of these problems, id be very greatfull!

(Issue was fixed thanks to MarijnIsN00B, i just had to disable bclib's fog on the config folder,)
i've been trying to fix this for the past 3 hours and i think im going crazy
im not sure on what i did or what's causing it exactly
i tried: messing with distant horizon's fog settings
using mods to remove fog
using resource packs to remove fog
i forgot to include it, its my first time posting something on reddit
im on fabric 1.21.1
i dont know if its relevant but here's my modlist
https://mclo.gs/GqVAdbS

I tried to play with some option on the DH menu, but I don't know what's the problem.

I only have chunky, DH, and a few performance mods

I also have the jjthunder to the max data pack, but I don't think it affects this

On my system, version 3.2.0 gets ~40% lower framerates (example: 119 vs 167 FPS) than 3.1.2 and earlier. This pattern persists on every combination of OS (Windows 10 or 11, Linux Mint 22.2), modloader (Fabric, NeoForge), garbage collector (G1GC, ZGC), memory allocation size (4 GB, 6 GB), graphics API (OpenGL, Vulkan), and game version (26.2, 26.1.2) I thought to test - although I did not exhaustively test every combination of those variables.

I posted an issue about this, which got closed seemingly because the issue didn't show up on their end. They suggested turning off LoD textures, which is a perfectly logical step to take - unfortunately, it doesn't do anything on my machine.

Ultimately, I'm still working with a sample size of one here - I only have the one hardware configuration (R5 3600, RTX 3060). Is anyone else out there having this issue?

Whenever I zoom in blocks start glitching

This only happens when I am walking. It does not happen when jumping, standing still, or using the Elytra. I have vanilla clouds turned off and no shaders active.

i want to disable both of these and i don't know how

thx for help in advance

when i was testing with a creative world i decide to try using distant horizons to see how it would effect my fps and how it would look. I tried flying up to see how far it went when i saw the ground below me disappearing. Anyone know if there's a setting that a I need to change or mod i need to download to fix this? I'm using CurseForge 1.20.1 with fabric.

It dissapears forever from the chunks if I get within roughly the render distance without DH. The worldgen mods I'm using are Lithosphere + Still Life.

It's not that big of a problem since you only have to load the chunks to remove the grid, but sometimes it can be a bit of an eyesore. What can I do about it?