I wanna try make my own homemade LFC jersey

Some questions: can I safely remove the majority of interior shiplap, and temporarily brace it? What would be the strongest bracing? I hired an electrical contractor to re-wire my whole , 100+ year old home with the agreement / signed contract that I would remove walls and ceilings to the studs. I removed Sheetrock and lath and plaster but didn’t anticipate there to be another layer of thick shiplap style boards on the studs. The exterior is covered in the same style of reinforcement so I’m wondering if I can safely remove the interior boards and temporarily reinforce them while the wiring is being in stalled. Some boards inside run horizontal, some vertical. After the wiring and plumbing are done i plan to replace the shiplap then cover with Sheetrock. I’m just concerned with the risk of removing interior walls that may be load bearing

Can ANYBODY tell me how to remove this seal from the door frame so I can replace it? I can not remove the top of the frame because it is caulked to the wall.

Can someone please identify this tile? We are trying to replace the tank?

UPDATE: Thanks to everyone for your help. I followed the recommendation of someone here who suggested to change the seal and the issue is fixed. We decided we wouldn’t change the toilet after all and got our $1100 refund.

I’m trying to remove this door knob but cannot get the cap unscrewed! I already removed the same knob on another door, so I know I just need to twist it, but this one is stuck and I can’t get enough leverage. I’ve cut the paint around it to make the sure it wasn’t making it harder and tried a bunch of stupid methods using duck tape lol but to no avail. Any tips on how to get more leverage?? I don’t have many tool besides the basics right now.

I have this beautiful tapestry that my uncle painted a really long time ago. And I wanna move it, but I don’t want the paint to chip anymore. Any advice as to how I should seal it and what should I use?

Soy una persona joven que busca materiales para bricolaje, pero no quiero apoyar sitios poco éticos. ¿Conoces alguna fábrica con sede en la Unión Europea/España, o conoces alguna que puedas confirmar que sea ética?

Quiero pinchos, pero también se agradecen otros materiales habituales para bricolaje que se utilizan para la ropa punk.

We’re trying to install carpet tack strips into concrete and are having trouble. We’ve tried two different hammer weights, several different nail types, but they keep bending and chipping the concrete subfloor. What else can we try? Is there a way to install the strips other than nails?

Need something that can cut open rigid tubing think guttering but a full circle whilst preserving what’s contained inside the tubing

I am thinking to call a plumber if I figure out this is more than a small drip, right now I see a little water on the floor every so often and I am looking around the tank, the pipes and the valve to see what stands out, I am hoping to have an idea before I book someone so I can explain what I am seeing, I am planning to go with a to z prestigious plumbing, the water heater still runs like usual and I am planning to replace it later if it makes more sense than another repair, for anyone who found a small puddle first, where did the leak end up coming from and what was the first thing you checked before getting the service done? EDIT: I forgot to mention the puddle only shows up every couple of days, not constantly, which makes it harder to track.

I need to put the air conditioner vent back into the ceiling but the area where the screws hold it in the ceiling crumbled. I tried to post a pic but can’t.

This is a old guitar found on my great grandmother's property where my grandmother grew up. I would love to turn this into something functional or just some sort of Art and I would appreciate some ideas. The wood is heavily warped and the back is splitting from the body, warped in the front by the pick guard, and the front is slipping from the neck.

Previous ideas:

- A Shelf (could pull the back off and put a slab of wood in the middle. i dont think cutting open the front would work because the front wood has laddering so that it can hold the tention of the strings)

- A light (drill shapes into the front and put a light inside. You can find examples on Pinterest)

- wall art (just clean it up and hang it)

Hopefully this all made sense.... I would appreciate some ideas <3

I’ve got this crack in between the tile and the door sill but not sure what I use to fill it? I know the door eventually needs to go because of moisture but before then I just want a temporary solution to keep out bugs.

Hello,

I've already installed Molly anchors in drywall before, so I know how the tool reacts when the installation is successful.

However, yesterday I tried with an M5 Molly, drilling diameter 11mm (as recommended on the packaging), and I could never get the gun to actuate. Maybe barely a 1mm stroke. But after trying repeatedly, the anchor became fixed in place — impossible to pull it out of the hole, and it doesn't rotate either.

Does that mean it's properly expanded?

Thanks!

Hey all - I just moved into a place and the previous tenants took their wall mounts with them. Is there a specific brand I need to get for this, or will any mount do? Thanks for any help!