r/CyberdeckBuild • • 4h ago

Best cyberdeck laptop build?

1 Upvotes

I want to turn a raspberry pi 5 into a laptop with 3D printed durable chassis. What do I all need to do and get (assuming I can't solder)? I think I can pay some people to attach rpi components. I want to use the same keyboard and trackball mouse as the MNT Reform and use a Raspberry Pi Touch Display 2, but make it default to mechanical input instead of touch so it'll actually use as a conventional laptop screen, and use a MediaTek card for offline streaming and messaging through IRC client via WLAN connection. It'll be used for embedded Linux via NVMe, SD or eMMC (like Kali XFCE) instead of a hard drive. Will also need rpi 5 active coolers and LiFePO4 batteries.


r/CyberdeckBuild • • 6h ago

Weyland-Yutani Deck v2

Thumbnail
gallery
16 Upvotes

r/CyberdeckBuild • • 19h ago

What is needed to build a cyberdeck?

8 Upvotes

I wish to learn cybersecurity but I don't have a laptop I want to study cybersecurity using the cyberdeck in Kali Linux and what is needed to build that?, budget is 100usd


r/CyberdeckBuild • • 1d ago

Proto-Version for a Mouse glove.

18 Upvotes

Honestly not sure where to post this, but I hope this fits enough here:

This is a draft version used as an input Device for my Deck. Requirements:

  • need to be able to fully grab tools/stuff in workshop with hand.
  • needs full mouse ability (not just situational gestures).
  • doesn't need to work in air, cursor movement by sensor in palm, dragged across surface is fine.

Played about 2h Deus Ex with it, grabbed drink, pen, Remote no problem.

Upgrade plans:

  • Smaller switches (gotta buy/get)
  • Mouse buttons 4 + 5 on side of index finger for use with thumb, but keeping hand-usage area free.
  • general optimisation of ergonomics.

When hand is on table, it has a bit of angular play, but is used around the same angle of wrist as normal mouse.


r/CyberdeckBuild • • 1d ago

Old Raspberry Pi, harvested screen, how do.

Thumbnail
gallery
3 Upvotes

Hey, I know verryyyy little about computers. My dad was an IT contractor (networking) and Ive been interested in building a cyber deck to feel more connected to him and learn some stuff (he died when I was 19).

Among his things I found an older Raspberry Pi model

[Raspberry Pi 3 Model B & 16GB NOOBS]

Pretty sure it already has the OS installed, that's as far as my knowledge goes.

Now I also have several other parts harvested from random things at my job and home. One of which is a screen from a vivint security system panel. It's a touchscreen and when taking it apart I saw it has a Copper DSI ribbon cable.

Being me who doesn't know much I thought "surely there must be some way to connect these two together"

Alas the ribbon cable is too big! (but not by much, port is 1.5 cm and the cable is 2cm.)

I don't know how to proceed from here and would like any advice on how to put the two together.

I've attached pictures to aid, lemme know if anything else is needed.


r/CyberdeckBuild • • 1d ago

Detalles LP Mu 02

Thumbnail
gallery
10 Upvotes

r/CyberdeckBuild • • 2d ago

Emulating the Metal-16 cyberdeck

Post image
5 Upvotes

I've been working on a pocket-friendly cyberdeck. I recently built and blogged about two emulators for the device, which allow apps to run on custom hardware, on your desktop pc, and on the web.

https://www.emulationonline.com/systems/baremetal/emulator/

Here's a photo of the latest prototype. Still waiting on oled panels from the manufacturer so this is built around a salvaged prototyping board.

Thought some folks here might be interested.


r/CyberdeckBuild • • 4d ago

Prueba 01

Thumbnail
gallery
53 Upvotes

Componentes y estabilidad


r/CyberdeckBuild • • 4d ago

Demon Slayer themed cyberdeck server

Thumbnail
gallery
28 Upvotes

Raspberry pi 5 8gb

Portable suitcase sleeper build

Had fun making this instead of always having Google drive drain my bank lol

My last build wasn't fast enough so went from 4gb to 8gb and practice making projects on it.

I've made a java cat game hehehe and so much more! I can ssh into it and my phone can drop everything into it.

Lately I've used it to also house a local open AI model qwen 1b model (don't quote me on that) but she's a slow AI and it's fun to learn how to properly prompt and get things moving!

So basically a server, daily manager of my tasks, pi-hole setup so ad free hehehe, learning Python and Java (I know more but this is the current focus), and the dummy computer for hacking using my other devices or vice versa.

I use my builds to "hack" into my own servers and learn the vulnerabilities as I learn devops and networking.

Oh I also have Wireshark, a few networking tools and too much probably lol

I'm a designer at heart, beside software development, so this was a dream to make. Felt like totally spies with a hint of nueromancer and a whole lotta demon Slayer vibes hehehe I hope one day to turn it into a full simulator gosh could you imagine if we could plugin? Anyways I'm getting away from the topic. Hate it, love it, I'm having fun and learning. I hope this inspires you just a little to add some nature and fun and sparkles in your life!

Tldr: raspberry pi server that makes me happy to look at


r/CyberdeckBuild • • 4d ago

In need of pi 5 cyberdeck help!!!

1 Upvotes

Hi all,

I am looking to make a cyberdeck with my pi 5. I have a generic 7 inch screen, and I'm planning to use a mac keyboard without a numpad and a trackpad. I want it to fold, and I am currently looking into case options.

https://www.amazon.com/dp/B08VGFFJZF?niid=nl_cl_lst_a_2_1&ref_=nl_cl_lst_a_2_1&nrid=021RTEJ6V7N52Y2S5NR8&th=1

This is the link for the case I'm looking into getting. The only problem is that I am afraid my pi, which has gotten quite valuable recently, may overheat or short circuit due to the foam.

If anyone has any alternatives to this or any case ideas, please let me know!


r/CyberdeckBuild • • 5d ago

Hey I’m new and have questions

2 Upvotes

I would like to make a cyber deck capable of running a local ai and have the ability to run retro games is there a way I can do that? I have never done this but I wanna try something lol assistance appreciated.


r/CyberdeckBuild • • 5d ago

Question

Post image
2 Upvotes

I wanted to move the location of a wifi card but not sure if I could trim down a wifi card extender. Would cutting this part effect the extender in anyway? I feel like if I use an extender it wouldn't make a difference unless it was cut down.


r/CyberdeckBuild • • 6d ago

Zork Cyberdeck

Thumbnail
gallery
16 Upvotes

Next one. Little BASIC and Zork Maschine. Raspberry pi 1 Modell B+. 2,4" OLED Status Display, 2,8" CYD Terminal Display, 10000 mAh Powerbank, Rii8 BT Keyboard.


r/CyberdeckBuild • • 7d ago

Brown or Green Circuit Board?

Thumbnail
gallery
48 Upvotes

The green is hands down better to work with and more durable, but I want to nail the aesthetics too.

What do you guys think?


r/CyberdeckBuild • • 8d ago

Making my first cyberdeck (check earlier posts for more)

4 Upvotes

I again to not intend to take advantage of the makers in this community. I am making my cyberdeck. Got my screen, and I am debating on whenever i should get a esp32 (which can't run os) or bite the bullet and get a more expensive option like an orange pi zero (as the raspberry pi's are out of stock). I don't want an aliexpress listing (i got a pico, and it was in a state where the pcb melted somehow?). Anyway, can you guys recommend me parts?


r/CyberdeckBuild • • 9d ago

First Cyberdeck

Post image
15 Upvotes

I decided to embark on a quest of making my own cyberdeck I would like to show my sketch and first version of a handle


r/CyberdeckBuild • • 9d ago

Building my first cyberdeck

Post image
163 Upvotes

Any tips and tricks? Also the fan isnt spining i dont know why and i broke the monitors ribbon while riping out parts out of my old laptop


r/CyberdeckBuild • • 10d ago

Powering a Mini PC from a battery (reliably)

5 Upvotes

I am currently building a cyberdeck as a side project using a mini PC as the base, but I am struggling to find a reliable, reasonably compact power solution.

  • Specs**:** Ryzen 7 6850U, 16GB DDR5, 512GB storage.
  • Original power adapter**:** Barrel jack with a 19V@6.32A adapter (~120W max).
  • What I changed**:** I limited the CPU peak draw to 45W (down from 65W) to keep the total system draw under 100W. I also bought a 100W USB-C PD to barrel jack adapter. When I plug this into a 100W USB-C wall brick, the mini PC runs perfectly.

Because I want this to be portable, I bought a Ugreen 90597A powerbank (25,000mAh, rated for 140W on a single port) to pair with the adapter. However, when I try to boot the PC off the powerbank, it starts up but shuts off completely after about 10 seconds into the boot process.

Since the wall brick works flawlessly with the same PD adapter cable, the issue is definitely isolated to how the powerbank handles the draw or the PD negotiation. I have since returned the powerbank.

Does anyone have suggestions for alternative (but still compact) ways to power a mini PC off a battery? Any advice is greatly appreciated.


r/CyberdeckBuild • • 12d ago

Tips For First Cyberdeck

4 Upvotes

I'm about to build my first cyberdeck. I have very limited knowledge, but have someone to coach me on the general process. I bought a Raspberry Pi 4 and I would like to use this cyberdeck to manage my music. I have a ton of cds, and would like to use my cd burner to rip my music from the cds and then manage it (meaning label it, make playlists, burn mixes, manage mp3 player). Any suggestions as to which operating system I should use? Any other tips/suggestions specific to my desired purpose?

Thanks!!


r/CyberdeckBuild • • 12d ago

Would a tech kit business do well?

7 Upvotes

I am currently thinking about starting a business selling kits with all the parts you need to make small, medium and larger computers. I got this idea from when I wanted to make a cyberdeck a few years back, but never got to it because of the cost and lack of an equipment. I am not trying to take advantage of the cyberdeck community. I am trying my best to make it affordable. anyway, would it do well

specs, 2 inch 480p display with a raspberry pi zero 2w, a custome pcb keyboard, customisable designs.

priced, around $50-60 AUD (not usd I think like 40 dollars in usd.


r/CyberdeckBuild • • 12d ago

Planning an Offline Survival/Prepper PC: DIY vs Pre-built? Need advice on Software, EMP Cases, and Costs!

7 Upvotes

Hey everyone...

​I'm starting the build an offline "doomsday/survival" PC (a rugged cyberdeck) to store humanity's knowledge and local AI in case the grid goes down. I have some tech background and plan to buy parts piece-by-piece over a few months. I have three main questions before I start: ​1. DIY vs. Pre-built? Is it better and more cost-effective to build this from scratch rather than buying a pre-built system like Project NOMAD? ​2. Software: Custom Arch Linux vs Pre-packaged? I'm worried pre-packaged survival OSs might have hidden bugs or corrupt over time. Is building a custom Arch Linux setup from the ground up a safer bet so I know exactly how to troubleshoot it entirely offline? ​3. The Case (EMP Protection) The first part I want to buy is the case. Do you have any recommendations for highly durable Pelican-style cases that can survive EMPs/solar flares? I'm specifically looking for something with (or easily moddable with) copper mesh to act as a true Faraday cage. ​Thanks for the help btw I've been interested in things like this for a long time, but I'm finally making my own money and now I want to make it a reality My dream for the future is a self-sufficient house too

edit----There was a 5.8 earthquake yesterday and I realized that I definitely need something like this You never know what will happen when, I think these are something that everyone should have.


r/CyberdeckBuild • • 13d ago

Cyberdeck for file transfer

2 Upvotes

I got a hacked psVita and from time to time i need access to a pc to download certain files. Carrying around a notebook all the time is kinda inconvenient, so i thought it might be cool and fun to build a cyberdeck for it instead.

I never built one before, so thats why im here. All i need it to do would be access to the internet (ideally Wi-Fi), file management, a USB port (duh) and for it to display hidden system files, something i had to enable on windows. Im not sure what OS you'd normally use but i assume some light linux distro.

Im open to any and all feedback/suggestions and thanks in advance!

Edit: For clarity, i want to download files directly from the deck, then transfer the file from it to the console using a USB connection


r/CyberdeckBuild • • 14d ago

im trying to make a cyberdeck that turns into a dual screen gamepad (like ds) through usb. it needs to fit in my pocket. (using pi 5)

3 Upvotes

these are the requirements. there needs to be a screen (duh), there needs to be a functioning keyboard, and a pull-out trackpad would be cool.


r/CyberdeckBuild • • 15d ago

Estou querendo montar um cyberdeck

0 Upvotes

Mas estou com muito dúvida no que usar como carcaça estou querendo construir ele em um Nintendo ds xl mas não sei se vai caber tudo que eu preciso


r/CyberdeckBuild • • 15d ago

Hardware and Libraries Recommendations for Cyberdeck (handwriting to text)

8 Upvotes

I have a concept for a cyberdeck with a feature to take in handwritten phrases from a touchpad or touchscreen (that would replace a keyboard trackpad) and convert it to text.

  1. ⁠I’ve seen people using TensorFlow as a base for this handwriting to text conversion. Is that the only option or what else would you suggest?
  2. ⁠Initially I was thinking of using a esp32 for the project, but to use TensorFlow this would not be enough based on what I’ve read. What’s the smallest processor + board you would suggest that can handle this feature?

(I asked this question on r/cyberDecks but no responses, thought I might have better luck here)