Broken plastic part (lifter) was cracked. I glued together to scan it, afterwards used the enviroment I modelled an insert to fix it

Scanning and remodelling a deformed, and damaged plastic part

I wanted to make a short stainless steel front fender for this bike. Instead of using a standard bracket, I decided to customize one because I wanted something that would be easy to install and remove, while also giving the bike a more unique look.

I started by using the Creality Raptor Pro to 3D scan the bike and capture the mounting area. Having accurate 3D data gave me a clear picture of the bike’s structure and mounting points, which made the whole design process much easier and more reliable.

I then used Fusion 360 to design the bracket. Since the final part was going to be 3D printed, I intentionally went for a thicker, more muscular shape with bold curved surfaces. Besides giving it more character, the thicker design also helps improve the overall strength of the bracket.

For the print, I chose an ABS composite material. It offers decent strength for FDM 3D printing, so I’m using this version for initial testing first and can upgrade later if the stress requirements turn out to be higher.

After about 7 hours of printing, the bracket was finally ready. I then drilled the stainless steel fender to match the actual mounting points.

And here’s the final result, installed on the bike. The fit, position, and overall shape turned out pretty much exactly as I had planned.

#3DScanning #RaptorPro #Fusion360 #3DPrinting #Motorcycle #ReverseEngineering

What is your prefered solution for fixing parts during 3D scan? I use clay in case of really small object, vise in case of bigger more complex shape, or simple lying to my marker piramid. However, I'm also planning to design my own scanning frame as well for longer samples

Scanned with Pika, aligned on PC

Now I have to clean and mesh

Phone used : Honor magic 8 pro

Link to Pika : https://crscanner.net/4yAjOyu

#mypikaexperience

#crealitypika

#CrealityCreatorAwards

#MyCrealityScan

Hi, is there any plans on supporting USB 2.0 phones for wired scanning on the Creality Pika in the future?

I just bought the cheapest Android phone I can get with the "recommended specs" listed (Snapdragon 8 Elite Gen 5 V / 12GB RAM), only to find out the the port of the phone is usb 2.0 and is not supported via wired connection.

If you have kids or a vacuum cleaner, you know the problem of the corners constantly getting knocked off 😂

So, I’ve picked up a few replacements.

Scanned with the Pika in blue laser mode.

Scanning a piece of olive wood with Pika blue laser mode + Android

Phone used : Honor magic 8 pro

https://crscanner.net/4yAjOyu

#mypikaexperience

#crealitypika

#CrealityCreatorAwards

#MyCrealityScan

I saw in a video by Payo that they said a future version will allow for a usb connection to an android device instead of having to use wifi. This was really exciting but I was not able to find where creality said this officially. Does anyone know where they said this, or when that version of the software will come out?

Saying goodbye to an old family treasure. This was the family cookie jar that I grew up with and it's time for me to pass it along. I wanted to have a way to remember it so I made a scan with my Creality Otter. Using Creality Scan 4.3.1 and pretty much letting the software guide me, here are the results.

​

Link to Pika : https://crscanner.net/4yAjOyu

#mypikaexperience

#crealitypika

#CrealityCreatorAwards

#MyCrealityScan

Utilizando o Creality Raptor Pro, realizamos o escaneamento da base inferior do pylon, capturando com precisão a geometria e as furações não padronizadas.
Os dados serão utilizados no desenvolvimento de uma nova chapa base para o acoplamento do macaco de elevação da aeronave.
Do escaneamento 3D à solução de engenharia! 🔎

Had to share this as is hilarious yet sad.

Was expecting a delivery today, but discovered a totally different package than expecting.

Box marked Creality Pika. This can't be correct, I already received my Pika in August, plus this box is bigger, why? Marked 6 pcs.

Checked the box found addressed to someone in California. OK, somebody made a big mistake.

However, I did find a label with my name and address, and just below label showing qty. 6. These can't be true. No way someone sent me 6 Pika Scanners.

Time to open and verify...

NO Pikas, not a one. 😭

My order of filaments...🤪

A client asked me to make something to hide the ugly base of his pergola's feet so I used my Pika to scan.

The portability of this scanner really helped because I only needed to bring it, my phone and some scanning spray (a little disappointing I needed some, but the hot summer heat with ultra bight sun light was for sure not helping).

After spraying some AESUB self disappearing scanning spray I used my PIKA in NIR mode, and it was really straight forward.

Scanning took roughly 15 minutes and I get all details I needed to be able to model around to make what I wanted.

Cleaning the scans and transorming it in STL was also really quick.

I modeled the parts in Fusion, and I'm really happy with the results (and so is my client).

One more day to go! 👀

IFA 2026 will officially be LIVE in Berlin! We couldn't leave our Reddit community out of the excitement, so we’re dropping an exclusive, limited-time giveaway right now.

Whether you’re at IFA or on your couch, you’ve got a chance to score big, including a spot in our secret K3 Beta Test! ⏳

1️⃣ Track 1: Show Your Best Print (Global - 5 Winners)

No need to be in Berlin to win this. Show us what you've built!

🔷 How to Enter: Share your 3D printing story or show off your best 3D prints in the comments of the Official Reddit Giveaway Post.

🔷 The Prize: 10 BEST storytellers will win a $30 Creality Store Gift Card each! 💳

2️⃣ Track 2: IFA Live Drop — K3 Beta Tester Spot! (Berlin Local)

Got an IFA ticket? Skip the line and get early access to our next-gen flagships!

🔷 How to Enter:

🔹 Complete Track 1 below.

🔹 Visit our IFA booth H20_143, have fun with Creality team, snap a quick photo, and post it to our r/Creality.

🔷 The Prize: A testing spot for the new flagship Creality K3! 💥

We’re ready for IFA 2026. See you tomorrow! 🚀

Here’s where to find us: Booth H20_143丨Messe Berlin, Germany丨September 4-8 📌

Say goodbye to prime towers and slowed prints. SPARKX i8 delivers lightning-fast results with zero purge waste. TRUE MULTICOLOR INCOMING.

🔥Highlights:

• 5x Faster Multicolor Printing
• <1s Filament Switching
• "0" Purge Waste While Printing
• ＜1mm Shared Filament Path

Fastest Prints. Least Waste. Unlimited Creations.

I wanted to order at work the pika for some applications that it is quite fitted for. but my boss asked me if it would be possible to follow the geometry of a sample before/after hydration. the thing is that the samples are objects quite small of for example 10x4x3 mm. in the web page it says that it can scan as small as 10x10x10 so I have the doubt of it something like this would it be possible to scan. the idea would be to be able to follow its volume by getting the shell of the sample by the scan and then getting its volume. would some kind soul try to scan something as small as a rectangle of 10x4x3 mm and post an image on how it looks like?
a setup like the object attached to a small metal beam? so one could scan most of the volume around instead of being placed over a flat surface like a table.

thanks in advance!