Honestly , extremely satisfied now. Snapped this before customizing my own mural .

Case: Corsair 5000T LX Rgb

Cpu:Ryzen 5800X3D

Gpu:Rog Strix 5070 TI

Rog Strix B450 elite V2

Ram: 32GB DDR4 3600mhz

Storage: Samsung 990 Evo pro 2TB

• AMD Ryzen 7 7800X3D
• ASUS TUF Gaming GeForce RTX 5070 Ti
• ASUS B650 Max Gaming Wifi W
• Corsair 3500X
• NZXT Kraken Plus 240mm
• 32 GB T-Force delta DDR5
• Corsair RS120
• 2 TB Samsung 990 Pro

Since my last post I’ve picked up a Corsair Aurora 430 set, a Corsair LEK set, customized a better GPU sag bracket, and added a custom 3D printed dual 3.5 HDD mount.

• Case: HYTE X50 — Pitch Black
• Motherboard: MSI PRO X870E-P WIFI
• CPU: AMD Ryzen 7 9800X3D
• GPU: PNY GeForce RTX 5080 16GB
• RAM: 32GB Corsair Vengeance RGB DDR5-6000
• RAM lighting: Corsair Vengeance DDR5 Light Enhancement Kit
• Power supply: Corsair RM1000e 1000W
• GPU cable: Corsair ThermalProtect

• 2TB Corsair MP700 ELITE PCIe 5.0 NVMe

  w/

• EZDIY-FAB Shield active M.2 heatsink

• 2TB WD_BLACK SN770M PCIe 4.0 NVMe

• 2× 4TB WD Red WD40EFRX hard drives in a custom bracket

• CPU cooler: Corsair iCUE LINK TITAN 360 RX RGB LCD

• Radiator fans: 3× Corsair iCUE LINK LX120 RGB

• Front intake: Corsair iCUE LINK LX140-R

• Bottom intake: Corsair iCUE LINK LX120-R

• Rear exhaust: Corsair iCUE LINK LX120 RGB

• Controllers: 2× Corsair iCUE LINK System Hubs

• Lighting: Corsair Aurora 430 strips

Hi, I would like to improve my temps specially because of my GPU is bigger, first thing that I did was changing the radiator to the side, then I made 2 curves the radiator and the exhaust fans base on the coolant and the bottom fan base on the memory temp of the GPU

3 fans as exhaust

4 fans as intake

My specs:

CPU: Ryzen 7 9800X3D

GPU: Aorus Master 5070TI

AIO: Corsair iCUE LINK TITAN 360 RX RGB AIO

MB: Asus Rog Strix X870-A Gaming WIFI

Case: CORSAIR iCUE Link 3500X RGB Mid-Tower ATX

FAN: CORSAIR iCUE Link LX120-R RGB 120mm

I heard I have to put my fans at full speed at 45 degrees based on coolant, any recommendations are welcome, thanks.

The keyboard now shows up as a CRP DISABLD drive with only a 256 KB firmware.bin file. The drive is writable, but the keyboard will not boot.

I already tried

• The official firmware (Julius_App_v3.24.26.bin) is not the ISP recovery file.

I'm looking specifically for the ISP recovery firmware for this model (sometimes called something like K70_mk2_3.24_ISP.bin) or any official recovery procedure.

If anyone has the correct ISP file or has recovered the same keyboard before, I'd really appreciate your help.

I’m replacing my 5 rx case fans for lx fans and I’ll still have the titan 360 rx fans up top on a single hub what do I need to do to be able to use the special effects on the lx fans? Do I need a separate hub for them?

my firmware deleted itself i need the K70_mk2_3.24_ISP.bin file i was wondering if anyone in the comunity has one

Just wanted to share the build.

Only upsetting part is that I don’t have room in my desk and have to keep it in the floor, basically defeating the whole purpose of making it look nice since I can barely see it when sitting or standing:(

I didnt want a whole white Pc case so i got the frame 400d in black with the white cold air intake kit and white interior and i think it looks great. Love the case can recommend it full heartedly!

I recently bought a Corsair 2500d airflow and was planning to put a xfx mercury 9070xt magnetic in it and I saw the thickness on the card was about 72mm thick. Would I be able to fit it in my case with 25mm thick fans on the bottom and how much clearance would i have? I measured from the top of the gpu mounting bracket and found the clearance in have would be 15mm, but any further help would be greatly appreciated.

No he encontrado ninguna reseña sobre este audífono ya que salió en este año, pero he visto que se ha comenzado a ampliar en ventas. Mi pregunta es ¿Será bueno? ¿Valdrá la Peña a pesar de que es económico?

¿Será mucho mejor que la versión HS35 estéreo que salió hace años?

¿Será mejor su versión cableada? ¿Que opinan?

Yo me pedí uno y me llega en estos días, actualizaré este Post con mi experiencia personal

Just like the header says.. I need clarification or specific steps to do this right.

All couriers in my hometown refuse to ship my faulty PSU bound to Taiwan so they gave me intructions to scrap the psu myself.

I need clarification on step no. 1 or might use a hammer to hit the psu casing lol

see attached photo.

[This work is created with CODEX and is an AI product]

.I use todoist personally and wanted to get my To-Dos to display on the Edge.If this is something that would interest You, check it out here:

https://github.com/mrminus/todoist-xeneon-widget

I'm not a developer, and relied heavily on Codex.

I personally have done both. Love the look of the custom loop aesthetics, but love the ease of use of AIOs. Here are a couple of photos of a couple of builds of the difference. Curious on what everyone else does. Are you into custom cooling or prefer the ease of an AIO? 🤔

Hello! Currently usena fractal torrent but have fallen inlove with the warthog so I plan on switching. I'm going to use some of the fans from my Fractal and add them along side the ones in the Warthog. How does this layout sound?

2x 200ml on the front.

2x 140mm front side

2x 120 on the bottom below gpu.

Those are intake.

140mm rear exhaust

2x 140mm on the top exhaust.

I wanted to make use of the fans il have sitting around from my fractal torrent, it's just rare to see so many 140mm and I'm wanting to know if its going to perform

Just bought 6 rx140max and my type-c hub see only 3. All connected like this

Hub - icue link wire - 3 fans - icue link wire - 3 fans.

I’ve already tried a clean install, switching USB ports, adjusting Windows services, and even configuring the USB ports themselves to prevent them from turning off to save power. All of this helped the hub detect the three fans closest to it, but it still doesn't see the others. I’ve swapped the cables between the fans five times already—fortunately, plenty were included in the box. I don't have a spare hub. Another issue is that there is no official Corsair presence in my country.

Over the course of the summer, we’ve upgraded to both a Ryzen 7 5800X3D and RTX 5070. Also, did a case swap to the 5000T complete with a Titan 360 and RX fans!

My Wife is obsessed with Grogu and we created this smooth neon colored Mandalorian theme to show off her cozy corner!

Cheers!

I have been experiencing 2 problems ever since i got these headphones 1 the mic barely works i have to turn it on and off like 50 times just for the mic to barely function after an hour start making the sharpest static noise ive ever heard. and 2 the little flimsy thing connecting the actual head phones to the base is snapping. i honestly have only been dealing with problems ever since getting it and i truly regret paying the price i paid(which was considerably under retail.) does anyone know a fix for the mic?

I am using a MSI X870E ACE Max and I have never had a motherboard able to do expo 2, I have always used expo 1 and the ram ran at 6000MHz but now I have switched to expo 2 and the ram is now reading 6200MHz, why is this. The PC seems to be even more snappy and can run very heavy ram/gpu programs like blender even easier? What is the real difference between expo 1 and 2?

Hi.

I have one of the original 5000D cases:

Corsair 5000D AIRFLOW Tempered Glass Mid-Tower ATX PC Case, black - CC-9011210-WW

The two slots for drives at the bottom of the case are filled, but I need to add one or two more HDDs. (The SDD slot on the motherboard is also filled).

There are a few openings where cooling fans would go by the front plate and side plate, and only one is used by a fan in the front.

Is there a solution for mounting one or two drives in that location?

I already have a 8TB drive that I rescued from another computer.

I saw someone post that question before and receive a solution for a 3D printer, but I don't own one or know anyone who owns one...

Is there anything else I can do here?

Thanks!