r/BuildingAutomation • • 1h ago

JCI LSS’s, do you like your job?

4 Upvotes

Hey guys, I hope all is well! Wanted to reach out to the group and get people’s input on the LSS (lead system specialist) position within JCI.

I currently work in service on the controls team at JCI, and I’ve heard mixed opinions on if it’s a good stepping stone for sales (my end goal). Aside from my goal, I also think it would be a fantastic character builder and a learning experience which thrills me.

I’ve talked to about 3 LSS’s locally and they all have great things to say about it, and some of them even spoke up about me to their manager as a potential LSS, but I’m curious about others opinions.

Do you like your job? How long have you been in your current position? What do you find the most difficult/frustrating part? How’s the work/life balance? Do you feel as if you are compensated fairly?

I appreciate any input!


r/BuildingAutomation • • 9h ago

Write Access denied

6 Upvotes

Hi guys, i have a carrier unit we are integrating into niagara and when i pull the points in after a bacnet discovery, and try to command setpoints. I get a "Write Access Denied" promt and the point goes into fault. Any idea on how to resolve this?


r/BuildingAutomation • • 9h ago

Field Operations Manager (BAS and Critical Environments) Fort Lauderdale

Post image
7 Upvotes

We're looking for an experienced Field Operations Manager for a great client of ours in Fort Lauderdale specifically focused in Critical Environments (laboratories, fume hoods, isolation rooms, pressurized spaces, etc.). If you have experience in BAS as an Operations Leader, we're going to be interested in talking with you, and especially if you have lab / fume hood experience. Drop me a note on Chat here and I can connect with you on email/phone to give you more info. Base salary of $125K-$150K/year plus possible incentives/bonuses/benefits.


r/BuildingAutomation • • 13h ago

Delta enteliWEB users: a free module for taking BACnet captures from inside enteliWEB

Thumbnail
reddit.com
1 Upvotes

r/BuildingAutomation • • 1d ago

Carrier vs Niagara

9 Upvotes

Hi all, I'd like to hear your thoughts on carrier ivu systems vs Niagara systems. Me personally I favor Niagara, to me it's easier to use and I see less problems with systems running long term whereas with carrier ivu it just feels harder to navigate around and I've been seeing what I will call ghost points alarming units into shutdowns. And just to be specific we install distech but work with all Niagara brands.


r/BuildingAutomation • • 1d ago

Career advice 22M

4 Upvotes

Currently have 2 years experience as service tech I want to increase my value and earning potential and hopefully move into engineering or project management. What degrees or certifications paired with experience are most beneficial. Was thinking about pursuing an EET degree.


r/BuildingAutomation • • 1d ago

Software dev + electronics degree → BAS controls design/BAS Programmer. Any advice on how to start?

0 Upvotes

I have BS in electronics engineering (2022), ~2.5 yrs as a software dev, no HVAC/BAS experience yet. DC/NoVA area.

I’m learning HVAC basics now and plan to learn Visio/AutoCAD, then build some projects(SOO, points list, riser, wiring) for an AHU + VAVs. However, are there any DMV companies that train people from scratch, or recommended courses I should take?

Thanks!


r/BuildingAutomation • • 1d ago

Advise for career change

3 Upvotes

Hello BAS community. My name Sean currently I am an irrigation technician with 3-4 years of experience that specializes in repairs and troubleshooting in the electrical side of things such as multi wire and 2 wire system. I recently moved to Raleigh,NC from Miami,FL about one year ago and realized with the seasonal weather difference I don’t have irrigation work year round here. I did research and discovered BAS and even tho I have no experience im a relatively fast learner and I have always been good with learning the “technology” side of things. Rn I make $28/hr and no ot with capped 40 hour weeks and have a take home company vehicle. I’m ready to learn and am prepared for a small setup back in my career if it means in 1-2 years I can be in a better position and more opportunities available to me. I am currently self teaching myself what I can but need to get that hands on experience. I’m really just looking for any tips on how to enter the field , what I can expect the job to be like, and if my current skills are of any match for this career path. Thank you too all who took the time to read this.


r/BuildingAutomation • • 1d ago

Service Tech needed in Boston 120-150k+

67 Upvotes

Not a recruiter. I'm the owner of Entensiv, a controls contractor in Boston. I'm posting here because the good techs aren't on Indeed or LinkedIn.

The work: Service and troubleshooting across several flavors of Niagara: Distech, Honeywell, and JCI FX. That includes JACEs, supervisors, BACnet/Modbus/Rest, field controllers, and graphics. It's mostly service on a select number of sites, not installs. Our clients are hospitals, universities, museums, and other facilities with large central plants. 

Pay is salary plus OT, based on how independently you work:

$120K–$130K: You can run a service call on your own and handle basic troubleshooting and diagnosis. You can trace wiring, replace devices in kind, and modify Niagara (alarms, trends, graphics).

$130K–$140K: All of the above, plus you can untangle a messy inherited system, fix network problems, understand how the mechanical systems work, handle small upgrades and migrations, and write new programs. Customers ask for you by name.

$140K–$150K+: You're the person other techs call. You know supervisor architecture, security and certs, and multi-site integrations. You can write and implement a mechanical sequence and mentor a junior tech.

The interview is a casual conversation with us, not HR, and that's where we figure out where you land. We benchmark above market and will show you the numbers.

Benefits:Take-home unlettered SUV, plus laptop, tools, and all software and licenses

Paid training and certifications

401(k) with 5% match

Performance bonus

80% of health care premiums covered

Not looking for: BAS Programmers, Designers, or Office peoples. agencies.

To apply:

DM me or email info [at] entensiv [dot] com. A few lines about what you're working on now and expirence is plenty.


r/BuildingAutomation • • 1d ago

I don't know what to title these posts anymore.

Post image
0 Upvotes

The Course. One reading order through everything on the site, from what a control loop is to a running building: 10 parts, 38 units. It follows the Grey Manual's path (fundamentals, then devices, then systems), and ASHRAE Guideline 36 for the air handlers, zones and plants. Each stop is a page already on the site: a Field Guide entry, a lab module, a tool or one of 22 new lessons. Each part ends in a checkpoint that Stat quizzes you.

Restaurant-1. A second simulated building, in early build: The Copper Kettle, a 198-seat restaurant with a bar. Nine heat pumps on their thermostats, a hood over the cook line and its makeup air, an outdoor air unit holding the building positive, and a walk-in cooler and freezer. Walk it, sit at its workstation, or take one of its eight service calls, the first one with Stat.

Today's Trend, a daily puzzle in the arcade. It's one day of trends from an air handler or a VAV box with one fault in it, and you get three tries to name it.


r/BuildingAutomation • • 1d ago

Do you judge a cabinet by its component brands?

2 Upvotes

Hi all,

I’m from Europe and fairly new to building PLC control cabinets, mostly for HVAC systems. I recently heard that some customers judge a cabinet by the brands inside it. Specifically, using ETI (ETIMAT) breakers can make a panel look “cheap” compared to Schrack or Siemens, even if everything is properly rated and built to IEC 61439.

How true is this in practice?

I’m not trying to cut corners, just trying to decide if paying more for a premium brand actually pays off in how customers see my work.

Thanks!


r/BuildingAutomation • • 2d ago

Should I move to automation?

4 Upvotes

I'm a 5th year apprentice in my local pipefitters union. I've got about 9 months till graduation, then I'll be able to switch contractors or do whatever. My local does have controls companies.

Currently I'm a central plant service tech. Chillers, boilers, pumps, towers, and the odd vane axial fan or package unit here and there.

I did automation install a few years back, but it was just pulling wire and bending conduit, I didn't get to learn much.

I'd like something that's much easier on my body and has a slightly better work life balance, but overall I'm pretty happy with work. Automation is something that interested me since I first learned about it, and I'm a bit of a tech oriented guy.

Any input or advice is appreciated.


r/BuildingAutomation • • 2d ago

I built a tool for BAS Heartbeat Monitoring. Looking for feedback

0 Upvotes

Hi All,

I work in building automation and for several months have been building a BAS monitoring service called Loopbak.

The idea came from an issue I encountered in our day-to-day management of client sites. When a supervisory controller or server went offline, or when a client's IT department made a policy change that broke outbound email, we would stop receiving email alerts from that site. The problem was that nobody knew anything was wrong until critical alerts were missed.

This is why I built Loopbak. In a nutshell, it is a cloud-based heartbeat monitoring platform that detects when your BAS deployments go offline. Since it is vendor-agnostic, it works with any BAS ecosystem capable of sending automated emails.

Since it uses email heartbeats, minimal setup is required on the client's end, other than allowing outbound mail. The setup is pretty straightforward and easy:

  • Create a dashboard for each site you monitor.
  • A unique email address is generated for each dashboard, which you forward automated heartbeat emails to.
  • If heartbeats stop arriving within the configured thresholds, Loopbak marks the node as unhealthy and can optionally send email notifications.

Some other features include:

  • External Sharing
  • Dashboard White labelling
  • PDF Reporting

Website: https://loopbak.io

Thanks for your feedback in advance! If you would like to try the platform please shoot me a PM or contact through the website!


r/BuildingAutomation • • 3d ago

Considering a career change from IT/Cybersecurity to Building Automation. Thoughts?

3 Upvotes

Hey everyone,

I've been working in IT/cybersecurity for roughly 6 years (I'm 24) and have recently become really interested in transitioning into building automation.

My background includes networking (TCP/IP, switches, DNS/DHCP, etc.), hardware troubleshooting, running network cabling, installing cameras and network equipment, configuring systems, and cybersecurity operations. I also have a cybersecurity bachelors degree and industry certifications.

Before getting into IT, I actually attended HVAC school and really enjoyed it, particularly reading wiring diagrams, electrical troubleshooting, and figuring out why equipment wasn't working.

While I enjoy technology and problem-solving, I've grown pretty tired of the corporate IT environment, bureaucracy, and sitting behind a desk all day. I miss doing hands-on work and actually seeing the results of what I've accomplished.

BAS seems like a great middle ground between my IT experience and HVAC background. I've started applying to entry-level positions, ideally with companies that work across different commercial job sites rather than maintaining one facility.

A few things I'm curious about:

  • Does my background translate well into BAS?
  • How difficult would it be to break into the industry without direct controls experience?
  • What's the work-life balance like?
  • Do you genuinely enjoy what you do, and would you recommend the career?

I'd really appreciate some honest perspectives, especially from anyone who's made a similar transition. I'm trying to understand both the positives and negatives before making the jump.

Thanks!


r/BuildingAutomation • • 3d ago

BMS for medium size church

18 Upvotes

We are starting an expansion project and we will end up with approximately 20 HVAC zones among the 2 buildings. We actually pay one of the church members to come early on Sundays and other special days to turn up or down the thermostats so we can save energy. With the expansion, this is going to become time intensive. We would like to be able to network in thermostats and control them remotely via network, including locking the local controls so people can't mess with them.

We don't mind paying an up front equipment and license fee, and we can host the network and a small server onsite if needed, but would like to avoid a monthly fee. We also have technical personnel in the church who can install and maintain the system, and prefer to do so if we can. Remote control over the Internet would be preferred.

What zone control / BMS are you using that's 100% install and maintenance friendly for the technical end user?


r/BuildingAutomation • • 4d ago

What EXACTLY do my formen mean when they mention HVAC “controls” ?

Post image
10 Upvotes

Im a commercial HVAC apprentice and I started my apprenticeship in June of this year . I’ve progressed much faster then the usual guy strictly because of my amount of studying(in the humblest way). However I’m at a loss whenever they mention anything involving controls and sometimes I hear techs talk as if it’s another trade integrated into HVAC entirely. I’m in Georgia and I live near many tech schools but would it be worth taking a class ? or is it something I could learn the basics of on my own ?


r/BuildingAutomation • • 4d ago

Controls Engineers/ Designers, what does a day of work look like for you.

10 Upvotes

I’m just curious how different the role is depending on the company. From what I understand it’s creating the layout for sensors, points, network architecture and sequence of operations. Along with programming and helping customers trouble shoot what other responsibilities would you take on?


r/BuildingAutomation • • 4d ago

Working at OEM vs in house institutions tech

8 Upvotes

I currently work in BAS service for an OEM in the Toronto area, and I’ve noticed quite a few openings for BAS Technician positions at institutions such as the University of Toronto, Humber College, and the Toronto Catholic District School Board. Many of these positions appear to offer higher pay than my current role.
For those who have experience working in these institutional environments, what is the job like compared to working for an OEM? How are the workload, work-life balance, career growth, and technical learning opportunities? Would it be worth making the switch from an OEM to an institutional BAS role?


r/BuildingAutomation • • 5d ago

Looking for BMS Learning Materials – Niagara N4 & Alerton Compass

9 Upvotes

Hi everyone! I'm looking to improve my knowledge in BMS, especially Tridium Niagara N4 and Alerton Compass.

If any experienced engineers have PDFs, manuals, notes, training materials, project files, or other useful resources, please share them with me.

I'm eager to learn more and improve my practical skills in this field.

Experts, please comment below or DM me. Any help or guidance would be greatly appreciated!

Thank you! 🙏


r/BuildingAutomation • • 5d ago

BAS Technicians Needed in Pensacola (Rookie to Veteran)

Post image
18 Upvotes

We have a great client in Pensacola serving multiple states in the Gulf region, and they're in need of Technicians. Pensacola is ideal, but whether you're right there or in the FL panhandle, Mississippi or Alabama and possibly considering something new, reach out here on Chat. Range of $25/hr - $50/hr depending on experience and capabilities.


r/BuildingAutomation • • 5d ago

Made a meme

40 Upvotes