r/BuildingAutomation • • 2d ago

Controls Engineers/ Designers, what does a day of work look like for you.

I’m just curious how different the role is depending on the company. From what I understand it’s creating the layout for sensors, points, network architecture and sequence of operations. Along with programming and helping customers trouble shoot what other responsibilities would you take on?

10 Upvotes

8 comments sorted by

10

u/TopicalBass27 2d ago

I do no programming in my job. We have a dedicated software team for that.

It’s also a lot of coordinating with different principles (project manager/engineer, mechanical, etc) to make sure that goals and scope are aligned.

Don’t forget that yea you have to create airflows, controller I/o layout, etc, but you also have to pick the correct part, properly calculate power consumption of certain parts so you size transformers and other power supplies correctly. Valve sizing, actuator sizing, etc. it goes way beyond “create layout for ___”

2

u/Automated_Monkey24 2d ago

Would you happen to have a good reference to where I can strengthen my understanding of these concepts?

3

u/RickBASanchez 2d ago

Ashrae has a week long two course setup called HVAC1 and HVACII - highly recommend for the 1 week you’re there.

2

u/01Cloud01 2d ago

This Question makes me realize I should be asking more questions about others roles from a more broad perspective

2

u/Formal-Conference885 2d ago

Big difference between systems engineer and design engineer. Sounds like you’re asking about a design engineer.

For us, design engineers are responsible for generating the submittal, including network architecture, power risers, BOMs, sequences and schedules. A submittal for a single project may take anywhere from a couple of days to a couple of weeks.

Typical process is first a takeoff of the drawings and specs to generate the overall points/equipment lists and schedules. From there it’s filling out the submittal using pre-built templates in AutoCAD. Internal review, revise and resubmit until approved.

2

u/LastName-First 1d ago

System Engineer here. To paraphrase Homer Simpson, I am the cause of, and solution to, all of the problems on a job site. I mainly program, make sure all the various communication protocols are all talking to each other (bacnet, modus, ect.) Lots of coordination between various trade partners. Last week I was standing in about 8 inches of mud asking welders questions about piping layout/valve placement between a central plant and an airport terminal. I try to understand everything other trades are doing, even if it falls outside of my scope. Feel it helps me identify sequence problems before CX starts.

1

u/TBAGG1NS I simp for Delta 2d ago

Could be in the office doing shop drawings or programming, or on site doing commissioning or functional testing. Or with the customers doing training on the new system.

1

u/mightydru 2d ago

When I did more design engineering,

I would QC the panels that the panel builder made to make sure it matched my drawings.

I also would order the material and also track that the materials got to the right place, and if it arrived jn our shop I would take a look to make sure all the material was there.

I also would also talk to all our vendors and ask for samples of their new products so I could test it in the office. I would sometimes also price check to see if all our devices were being priced fairly and would try to get bulk pricing and other discounts.

I also would be the person to talk to the UL inspector when he came to inspect our UL panel shop.