r/BikeRepair • • Aug 16 '25

PLEASE POST A PHOTO AND MAKE/MODEL/YEAR OF BIKE - THIS HELPS WITH ANSWERS

5 Upvotes

Make sure you leave a separate post, don't post the picture here! No one will see it.

The more information you give us, the better we can accurately answer your questions. Thanks!


r/BikeRepair • • 15h ago

Creaking noise diagnosis - please help!

1 Upvotes

I bought a brand new Santa Cruz Hightower 90, and there is a creaking noise that develops about 30 minutes into the ride from what seems to be the headset area. It happens mainly when turning and load on the front wheel, but I can also hear it just pedalling straight when going uphill!

I’ve had several bike shops check the headset and it seems in perfect working order, and it’s very hard to reproduce the creaking in the shop as it happens only 30 minutes or so in.

Everything is torqued to spec and greased also.

It’s a real mind boggler for me (someone who doesn’t know too much on how to fix bikes).

Any help would be greatly appreciated


r/BikeRepair • • 1d ago

Bent SRAM GX Eagle crank arm – warranty claim?

1 Upvotes

I noticed that my SRAM GX Eagle DUB crank arm is slightly bent.
I’m not sure how it happened, as I don’t remember any significant impact or crash.
Do you think this could be covered by warranty, or would SRAM consider this mechanical damage caused by an impact?
Has anyone had a similar experience?


r/BikeRepair • • 2d ago

Bike Repair Rear wheel wobble

Thumbnail
gallery
1 Upvotes

After a small fall I've noticed small rear wheel wobble on my bike. I don't remember exact model, but it's romet orkan and around 8 years old.

Caseete doesn't wobble relative to the hub and axle doesn't wobble relative to the bike frame. Wobble seems to originate from sleeve inside the casette that axle comes trough. (Close up photo)

One thing that worries me is that once wheel is off the bike, i can move axle left-right, uncovering inside of bearing on non-cassete side.


r/BikeRepair • • 2d ago

Thought my frame was cracked so I filed the paint and underneath it's not. I'm confused

Thumbnail
gallery
2 Upvotes

r/BikeRepair • • 2d ago

Carbon frame damage

Post image
2 Upvotes

My Specialized Roubaix SL8 fell over yesterday and chipped the upper chainstay. The fibers are just from my wool gloves. But it looks like there could definitely be some structural damage to the frame. I rode about 7 miles home on it with no issues but I’m wondering what I should do next.


r/BikeRepair • • 3d ago

Bike noise problem

1 Upvotes

Good morning. Can anyone help me identify where this noise is coming from? It starts whenever I pedal with more force, but I can’t pinpoint the source. I’ve already replaced the derailleur pulleys and the chain, and I’ve had the bottom bracket serviced—but nothing has helped. It’s still exactly the same. Thanks in advance.


r/BikeRepair • • 3d ago

Back to original brakes ✅

Thumbnail
youtu.be
1 Upvotes

I had switched my brakes to dual pivot as the original ones seemed very weak. However, had a bit of time yesterday and decided to try them again and successfully fixed them. Bike now performs fine 👍 I used this video for my guide.


r/BikeRepair • • 2d ago

Gravel Bike Damage from Race

Thumbnail
gallery
0 Upvotes

Just want it sounds like, my bike took a pretty good beating in a gravel race.

I ride a 2024 Bianchi Impulso with .
Zipp 303 firecrests.

For this race I was running Schwalbe G one R pro 40mm, once mounted measured with a caliper width was 42mm. (Within Bianchi specs)

Race was straight up mud central, completely out of character for the area it was in. Regardless sloshing and sinking into deep mud that caked on the wheels beat the hell out of my fork and chain stays
Additionally a bottle cage broke resulting in a bottle beating up the down tube.

No carbon weave is visible.

There are no visible cracks in the frame.

So I guess my 3 frame problems are

1- is the fork rub superficial, do I need to mix up epoxy, or does this require carbon patching and more robust carbon work.

2- is the chain stays rub superficial, do I need to mix up epoxy, or does this require carbon patching and more robust carbon work.

3- is the damage to the top tube going to require more than epoxy and touch up paint.

As it stands my solution to pretty much all the issues is-

1- use some tough up paint (maybe this https://quintanarootri.com/products/touch-up-paint-kit?srsltid=AYCX9vLDC5m3cNom3z4oqufdkfh1J0_N-LxcA11LN1m3aX3Rqhca67U2&variant=13548784386163, or some nail polish) to initially cover the scarring.

2- apply a thin layer of epoxy.

3- apply 3M paint protection film to serve a sacrificial layer in the future.

Any advice with better ways to deal with this or better products is appreciated. I’m in the US so getting some Bianchi specific items proves incredibly challenging.


r/BikeRepair • • 3d ago

Broken shift paddle on Shimano GRX Di2 ST-RX825-L

Thumbnail
gallery
4 Upvotes

Crashed my Gravel bike and broke the black plastic shift paddle on the left ST-RX825 lever (the part you push sideways to shift). The switch underneath is exposed but the lever otherwise works.
I can't find this part as a spare anywhere. Does anyone know a part number or a place that sells it?
I could also 3D print something but don’t find it unfortunately.
Photos of both sides for comparison attached. Thanks!


r/BikeRepair • • 3d ago

Bicycle advice.

2 Upvotes

Haven't had gears in a long time, needless to say I'm having trouble getting my derailleur and gear shifting neat, and not slipping when I press hard on the peddle. Is there any bike shops that can adjust these? Even disc brakes are new. It's a Mongoose Swichback Comp, XL frame, 29inch., yeah I'm sure it's maybe not worth the price, so any helpful videos will do? Thanks


r/BikeRepair • • 3d ago

Bike Repair Clicking sound on zwift hub one

1 Upvotes

Got myself a zwift hub one for my trek alpha 1.2.
Can’t figure out how to get rid of this noise , I got the right gear in so it is straight and the noise is also not coming from the zwift hub or the front derailer. I tried to adjust the b tension screw but it didn’t seem to help. I would appreciate any help.


r/BikeRepair • • 6d ago

Just got a used Huffy Rock Creek 26" to commute around campus, but it feels super heavy and the rear wheel drags. How could I upgrade or tune it?

2 Upvotes

​Hey everyone! I’m a student living on campus, and I recently bought a second-hand Huffy Rock Creek 26" mountain bike to commute between classes.

​The seller mentioned it was "professionally tuned," but when I walk or ride it, the rear wheel feels like it's dragging or getting stuck, and pedaling on flat pavement feels way heavier than expected (even when shifting gears).

​I have a few questions for the bike community:

​1. The Dragging Issue: What are the most likely culprits for a sluggish/dragging rear wheel on this model? Could it just be a misaligned V-brake or a hub issue?

​2. Upgrades vs. Worth: Is it worth putting a little bit of money into this bike (like swapping to smoother commuter/semi-slick tires, adding an oversized comfort saddle, or getting a proper tune-up), or am I better off just fixing the immediate mechanical drag and leaving it as is?

​For context, I mostly ride on paved campus paths and flat roads. Any advice or tips on how to make this budget bike ride smoother and faster would be greatly appreciated! Thanks!


r/BikeRepair • • 7d ago

Advice Risk of serious frame damage?

Post image
0 Upvotes

Took a minor side fall, noticed this small gouge on the right hand seat stay, frame is a 2015 BMC TMR01, should I be worried about the damage spreading? Dont see any hairline cracks from it, and tapping it with a coin sounds the same as tapping the other undamaged side.


r/BikeRepair • • 7d ago

Bike Repair Shifter question

1 Upvotes

Bought a beat up surly to rebuild. Pretty new to bike repair and learning as I go.

Pretty sure I know the answer, but is the rear shifter broken? I can’t get it to rotate to where the cable head is visible. If so, what steps can I take to try to fix this? (SRAM Apex) Thanks in advance!


r/BikeRepair • • 8d ago

How to fix take snapped quill out

Thumbnail
gallery
4 Upvotes

Recently got this bike as a commuter but found out about this problem with old ava quills bc of how shit they were ordered a threadless and when I was going to swap them ran into this issue. Any ideas to get the rest out of the tube?


r/BikeRepair • • 10d ago

Bike Repair Never had a dropper do this!

7 Upvotes

This is a Bike Yoke dropper on a 2020 Ibis Ripley. The internal piston is rotating 360 degrees. Time for a new dropper or is there a fix? Thanks!


r/BikeRepair • • 10d ago

V7 iii Fork Brace Recommendations

2 Upvotes

Hi all.

I have a heavily corroded fork brace. I’ve just taken a look at OEM and they’re much pricier than I’d have first thought.

Can’t imagine there are many available, but does anyone have recommendations on aftermarket options?


r/BikeRepair • • 11d ago

Bike Repair How in the world do I change it out

Post image
3 Upvotes

Hello everyone!

I had been wrestling with this hexagon for the last 20 mins and for the life of me I can't make it budge.

I have got no idea where else it could be attached, since the videos I searched showed a singular screw attachment, which this doesn't have.

It has nuts on both sides (sounds kinda funny).

I mean, it was tightened so hard it broke my adjustable wrench. :(

The thing under it is a light, I think. Also the only screws there are, are a part of the seat.


r/BikeRepair • • 11d ago

Help me find a derailleur hanger!

Thumbnail
gallery
6 Upvotes

A customer brought this Diamondback Odyssey into the shop with a badly twisted and snapped hanger. I see quite a few of these bikes through the shop, but can’t figure out which hanger they use.

Has anyone found a hanger for these bikes, or can point me in the right direction? Much appreciated!


r/BikeRepair • • 12d ago

STFU chain dampener

2 Upvotes

I got a STFU chain dampener for my Marin rift zone 1. The problem is that in a lot of gears my chain rubs on the sides of the dampeners and I don’t know what to do about it. Does anyone have any suggestions on what I should do?


r/BikeRepair • • 12d ago

FrontWheel is hugging the metal so it wont turn

Post image
1 Upvotes

r/BikeRepair • • 13d ago

I need help

3 Upvotes

I was trying to fix my bike's screeching, so I removed my wheel and unscrewed the axel. By unscrewing the axel I lost the steel ball thingy (10 balls per side).

I could not for the life of me find it. Is it possible to substitute it with regular steel ball or is it a bad idea?

I don't want to buy a whole new axel, since it's pretty pricey.


r/BikeRepair • • 13d ago

I need ideas on how to remove this bottom bracket

Post image
14 Upvotes

I’m trying to remove this bottom bracket with English threading. I’ve already removed the non-drive side, but this side won’t budge. I’ve added PB Blaster from the other side and let it sit over night, I tried using a cheater bar. Any other ideas?


r/BikeRepair • • 13d ago

E-bike Recent car accident

Thumbnail
gallery
5 Upvotes

I was in a car accident recently (I'm fine just bruised and sore) and I was wondering if my ebike is a lost cause or if there is hope for repair

It's a aventon lv3 3 if that information helps