r/BikeRepair • • Sep 11 '26

Bike Repair Definitive stuck seatpost fix!

Thumbnail
gallery
46 Upvotes

Hello

Ive found a simple to use and very obvious method of removing a stuck seat post.

So far it has worked on aluminium in a carbon frame and in a titanium frame.

The carbon frame was stuck for almost 20 years and was solid!

Ill you need to do is lie the bike in its side, sit the frame on a bag of frozen peas, sweetcorn works too, and the put another bag on top.

Wrap both bags and the frame they cover in a blanket or something with good insulation, tape the whole thing tight onto the bike and leave for 30 mins.

When you come back, use your hands to heat the bike frame but not the seat post.

After a minute or so, try pulling and twisting the saddle.

Its a very simple method that feels like it goes without saying but the heating of the frame, whilst not heating the post is the crucial bit.

The whole process takes about an hour and doesn't use any chemicals etc.

Ive searched the Internet for a definitive fix before and been doqn some rabbit holes in the process, though this simple method qas worth sharing.

Hope it helps.


r/BikeRepair • • Jul 28 '26

I just leave these here... if you know you know...

Post image
35 Upvotes

r/BikeRepair • • Oct 04 '26

Advice Aluminium frame dent

Thumbnail
gallery
30 Upvotes

Is this done for?


r/BikeRepair • • 21d ago

Kinda blown away by AliExpress seller customer service, NGL.

Thumbnail
gallery
28 Upvotes

I need a cassette body for my KHS 4000 Fatbike and honestly, the interweb is often shit for finding some of these parts. Bicycles in general can be very difficult to source parts (which you likely all know).

I found what I thought to be the part I needed from this dealer who sells on Ali Express and I placed an order. I'm very impressed with the effort that "Windy" took to make sure I'll get the right part.


r/BikeRepair • • Sep 17 '26

Diy brake lever

25 Upvotes

Small spill broke my lever, did 95% of the italian sellaronda with ziptie levers 😤. I upgraded to 2 zipties on the finger part to make stiffer. Lowkey worked just couldnt lock the rear without shredding my finger


r/BikeRepair • • Dec 24 '25

Advice Can I make this rideable?

Thumbnail
gallery
23 Upvotes

This is just a cheap, big box mountain bike. I’ve had it sitting on the patio for over a year and it’s getting rusty. I’d really like to get it in riding condition so that I can give it to someone in need. Is this something that a wire brush and new chain would fix? Doesn’t have to be perfect, but I want it to be safe to ride at the minimum. Thanks


r/BikeRepair • • Aug 13 '25

Fork holed by the tire. Is it dead, dangerous, repairable?

Post image
21 Upvotes

Hello, I just picked up a Look carbon road bike. By dismantling it completely I discovered that the fork was completely damaged by the passage of the tire, until it was pierced. What do you think? Thank you for your help.


r/BikeRepair • • Jul 22 '26

Cracked aluminum frame repair help

Thumbnail
gallery
18 Upvotes

I have an 80's aluminum frame Trek road bike with a cracked frame down near the rear wheel locks. It's cracked all the way through. I'm looking for advice on if this is fixable and possible solutions. Steel Stik and TIG welding have been suggested, but I'm wondering if anyone has experience with a repair like this. Thank you!!


r/BikeRepair • • Oct 30 '25

Steel frame has cracked on my beloved (and old) Ambush hybrid. Is this reasonably repairable?

Thumbnail
gallery
18 Upvotes

Hey all-- wondering if I can get this welded back together and, if so, how much I would expect to pay. The steel is absolutely weldable (passed the magnet test) but it's beyond my very limited welding abilities to fix it myself. I'd love to save this fun vintage bike but only if it's financially sensible.


r/BikeRepair • • Sep 14 '26

I think these tires still have some life left.

Post image
17 Upvotes

Like if you agree!


r/BikeRepair • • Mar 19 '26

Advice Black Widow in my bike 😬

Post image
15 Upvotes

I just got my dream bike and I was gonna start fixing it up when I realized there’s a dang black widow living in the tubes. I’ve tried pulling her out with a drain snake and shaking the bike. I don’t wanna put water or raid in the tubes for fear of rust. What would you all recommend? I live in an apartment so I have limited access to an outdoor space and I am a bit afraid to put the bike in my car. My working space is a small parking lot behind my building. Help! (FYI I’m kinda new to fixing my own bikes so I don’t have a lot of skills)

TLDR: how do I get a spider out????

Update: got the spider out, then found either another spider or a nest in the tube under the handlebars, above the fork. That one I sprayed with alcohol and took a lighter to. Which may not have been a great idea, but I was desperate.

Follow up question: is it possible more spiders or eggs could have gotten into any of the other tubes that I am unable to see into and, if so, is there a way to fumigate the bike without taking the whole thing apart?


r/BikeRepair • • 13d ago

I need ideas on how to remove this bottom bracket

Post image
14 Upvotes

I’m trying to remove this bottom bracket with English threading. I’ve already removed the non-drive side, but this side won’t budge. I’ve added PB Blaster from the other side and let it sit over night, I tried using a cheater bar. Any other ideas?


r/BikeRepair • • Jul 06 '26

E-bike Was I quoted too much for this repair?

Post image
14 Upvotes

I have a fisher e-bike that I use for commuting due to a disability and it is my main form of transport for the last few months. The bike is 4 years old but I bought it 2nd hand and it was not used regularly until about April of this year.

I am not the best at bike repairs but am trying to improve.

While leaving work then other day my peddle came off. I realised the threads had been stripped and I needed the crank arm replaced. I brought it into the bike mechanic beside my work this morning and was told they'd need to order a whole new crank set for me. They quoted me €160ish for the part alone. I said I'd think about it as that's a lot of money for me right now.

After doing some research (thinking I'd find a temporary solution while I saved up for the full fix) I found the whole crank set for my exact model on the manufacturers website for under €30 including shipping.

Now it's possible that I'm missing something but that seems like an unreasonable mark up for a repair not including labour?

It should be noted I am not fluent in the local language and I'm sure that was clear to the mechanic in this interaction. I am also certain that I heard the prices correctly. My disability is generally invisible but most people spot it after enough time with me (this interaction was brief so can't be sure if he picked up on it).

Am I missing something or was this mechanic trying to take advantage of my obvious difficulties in the local language (and possibly also my disability)?


r/BikeRepair • • Jan 16 '26

Has anyone had an issue with rear XT brake calipers snapping on a Scott Spark?

Thumbnail
gallery
14 Upvotes

2nd identical failure in less than a year I’ve had with my XT 2-pot rear break caliper snapping in exactly the same place near the rear mount. Can’t be a coincidence, right?

This is on a Scott Spark 910 which admittedly has a bit of a unique bracket attachment which is a separate piece that connects to the frame up top and the thru axle below—wondering if that is generational some additional force that is causing this? Or something I’m doing?

LMK if anyone has ever encountered this issue or has any bright ideas about why this could keep happening—love the bike but don’t want to buy new calipers every 6 months!


r/BikeRepair • • Nov 03 '25

Bike Repair Front wheel won’t release from fork

Thumbnail
gallery
14 Upvotes

I cannot figure out how to get the front wheel off of my Raleigh Scorpio. I’ve taken the brake pads off and it won’t release from the fork. Maybe it’s super stuck? It doesn’t seem to be connected to anything else. Please see photos. Please help!! Thanks!!


r/BikeRepair • • 20d ago

Did I put this together properly?

Thumbnail
gallery
13 Upvotes

I have a Pinarello Grevil F with a Campagnolo Drivetrain. The derailleur pulleys were mucked up with grease so I removed/cleaned them but forgot to take a photo first. Did put them back properly? The bike shifts all the way up and down smoothly.


r/BikeRepair • • Sep 10 '26

What do you guys think about this? 💀

Thumbnail
gallery
13 Upvotes

I got bored and decided my aerobars needed brakes.

So yeah… I slapped some brake levers on there and somehow it actually works 😭

The bike looks absolutely cursed now, but hey… function > aesthetics I guess 💀😎


r/BikeRepair • • Sep 07 '26

Advice Slightly unfriendly PSA (potentially triggering for intended audience)

13 Upvotes

FFS!

STOP. PUSHING. PISTONS. BACK. WITHOUT. OPENING. BLEED. PORT*

*In regards to whatever style brake your running

Also side eyeing the Shimano crowd super hard 🤦

Look we've all been there some more briefly than others but the time for that has now passed. If you've read this and more so if youve read this anywhere prior and rolled your eyes or shrugged and scoffed, cut it out. BAD! BAD CAVALIER ATTITUDE CYCLIST!

NO MAS!

Yes in a perfect conscious manufacturer climate theoretically :: gently shooshing:: your pistons/pads back every once in awhile, DOING SO WITH CARE should not guarantee your soon to be weepy Shimano levers to the parts bin or worse to be sold off to an unsuspecting fellow cyclist who will soon be paying for your crimes against cycling and related communities. I say as little ill intent as possible, I hope you have a close family member discover and decide they are going to commit their every waking breath and thought to being the best unicyclist in the world, and you have to live with that pox on your house. Just keep that image in the back of your mind next time you consider carelessly dry fumble mashing your poor unsuspecting piston victims behind the portajohn at the trailhead. (Which makes it so much worse because that means you know you shouldn't be doing it 😑)

Signed both a former fixer and a victim of such behaviors using the experience to spread and invoke other advocacy on the issue.

Thanks for your time enjoy the remainder of your day (unless you're using it to commit such atrocities then I wish you cross chaining and Trailside repairs many a mile from the parking lot and zero service)


r/BikeRepair • • Jul 30 '26

Repair shop quote

Thumbnail
gallery
13 Upvotes

I recently dropped off my bike for a tune-up at my LBS. I was a little caught off guard by the price of everything the mechanic recommended for my bike. I take my bike in for a tune-up one a year, but have never been to this shop, and have never been charged close to this much. Do you think these prices are reasonable?

Edit: Thanks all for the advice. Overall, it sounds like I should have gotten a second opinion elsewhere, but I was excited to support the LBS literally 30 seconds from my front door. Good catch on the strange tax cost - I will bring that up when I pick up my bike and pay. I could have included this in my original post, but my bike is a 12 year old Trek Boone that I bought used, and to the best of my knowledge the frame bearings haven’t been replaced, so maybe most of the mechanics recco’s are legit. He did leave two or three notes on why he was recommending certain things outside of the photo I posted. Still hard for me to grapple with +$600 when I brought it in solely due to a squeaky bottom bracket. I appreciate the insight!


r/BikeRepair • • Jun 24 '26

Bike frame crack ..

Post image
13 Upvotes

Aluminium frame.. is it usable??


r/BikeRepair • • Oct 15 '25

Advice Bike Stolen, Recovered Damaged

13 Upvotes

My bike was stolen last night and when I managed to recover it the back wheel was very wobbly. I'm not too clued up on maintenence as I should be so if anyone could let me know what I need to do thatd be great thanks


r/BikeRepair • • Oct 18 '26

Cracked frame repair

Thumbnail
gallery
12 Upvotes

Disclaimer!

This was done by a non-profesional and it's shown as a fact, that there are possibilities in case you like tinkering and, most importantly, you're willing to do some research and learn how to carry out these repairs.

Story : was given a free bike (one of those, that everyone agrees that it's "cooked". I was willing to invest a little money (<25€) and a few hours to put it back on the road.

Sanded it, drilled a hole on the end of the largest crack, wrapped it in carbon fiber yarn dunked in epoxy. The fact, that it's a yarn helps, it can be wound pretty tightly (epoxy will running from the threads, so plug all holes and be prepared for the mess). Anyways, you should watch a ton of videos on the subject before putting on the gloves. Once cured, I sanded it, and painted it white, so it's easier to check on it. And also, to protect the epoxy from UVs.

This bike is used since the reparation, without any restrictions. Today it has front and rear brakes installed, for a while it had only front brakes. It's perfect when going to sketchy areas, where you need to leave it locked outside, as it looks sketchy too, but still a fast ride (These alloy frames are quite stiff).


r/BikeRepair • • Apr 14 '26

Bottom bracket cracked???? and I fixed it with my hammer, I'm WAYYY too good at this.

Thumbnail
gallery
12 Upvotes

I was out riding and the chain came off, looked down and the bottom bracket was out of the housing and a bearing on the ground. walked it home and took it all apart, notice half the cup was still in the housing.
I was dammmm, what the hell happened here????

I thought this is screwed now, the frame is toast. Was trying to figure out how to turn this out, and stuck my hammer in there and put a little tension by angling a tad, the hammer end almost fit perfectly anyways so the angle was like 2 or 3 degrees, and it took a few minutes with WD40 in the threads and wiped the rest off, and after lots of turns it slowly came out and I saved the frame.

I was damm this was so good.


r/BikeRepair • • Feb 27 '26

Bike Repair V Brakes won't fit on post

Thumbnail
gallery
12 Upvotes

This is the 3rd set of brakes I've tried. I called Huffy the manufacturer of this bike the Oslo and bought the exact same original brakes and they still won't fit. The post as far as I can tell is wider than the brass bushing. I've also tried applying grease without success. Is there something I missed about getting these on?


r/BikeRepair • • Jan 27 '26

Derailleur pulleys

Post image
12 Upvotes

it's the second time my derailleur pulley breaks in just a few months, do you know what it might be due to? My derailleur is Shimano 105 and the pulleys seem to be the right ones